STI Firestop’s SpecSeal CID cast-in 2-in. firestop device is a concrete form sleeve and firestop usable in concrete floors as thin as 2.5 in. and as deep as 36 in. Its maximum in-service temperature is 130ºF. Free expansion begins at 320ºF and goes up to 250 times the volume.

Seco-Larm’s EV-6600-N2BQ 12-in. mirror camera is mounted behind a mirror for discreet monitoring. It has a 2.8 mm lens and a low current draw of 67 mA at 12V DC. The 3-axis mounting arm enables flexible installations.

Westgate Manufacturing’s EL-1 LED emergency light has two fully adjustable 1W, glare-free lamp heads. It has a dual-voltage capability of 120/277 and can operate in temperatures between 68°F and 122°F. It has a 3.6V Ni-Cad rechargeable battery and is made of high-impact thermoplastic.

Ascend Tools Inc.’s 5-in., two-in-one combination electrical wire stripper and cutter is made of surgical steel and is designed for low-voltage soft copper and electrical wire only. The stripper self-adjusts to wire size and has a stripping capacity of 26–14 AWG. It has a cutting capacity of 14-gauge stranded wire.

Southwire’s Circuit Defender 2-hour rated circuit integrity cable is fire resistive and available in 14 to 18 AWG. It has oxygen-free solid bare copper conductors and silicone rubber insulation in red and black, as well as a PVC jacket in red and MICA tape.

Jameson’s Spool Mule has a heavy-duty steel frame designed to hold common spool sizes for FTTH flat-drop and microduct, up to a 36-in. diameter. It’s collapsible, and the 27-in. axle enables simultaneous use of multiple spools. Users can load or unload the fiber midspan.

Viking Electronics’ 40AE 15W overhead paging system ceiling speaker flush mounts into a 9.5- to 10-in. diameter hole. The mount system is integral. The speaker provides additional paging coverage to any system with an 8-ohm output. 

Platinum Tools’ SealSmart Procon compression tool features a rotating connector positioner and multihead adapter. It has an adjustable crimp stroke and accommodates all standard compression F, BNC, RCA and right-angle connectors. It is designed for CATV, CCTV, satellite, security, home theater and other applications.

Hikvision’s DS-2TD2637-15/QY thermal and optical bispectrum network bullet camera features video content analysis and a smoking detection algorithm. It works in temperatures from –40°F to 149°F and up to 95% humidity. It has an IK10-rated housing.

Jameson’s 7-08A fish rod luminescent whisk is compatible with all Jameson fish rods. It features glow-in-the-dark fins to navigate obstructions and avoid snags in low-light applications. The threaded female end enables attachment with other fish rod accessories.

Specified Technologies Inc.’s LC120 SpecSeal LC endothermic firestop sealant is latex-based for construction joints and noncombustible penetrations. It is applied with a standard caulk gun and forms a flexible seal. It is tested for up to 4 hours of fire resistance and works in temperatures up to 185°F.

Copperweld’s 150V premium bell wire is a Class 2 power-limited circuit cable. It’s made of solid copper-clad aluminum 10% and annealed conductors with 6 mils of PVC insulation. The conductors are jacketed with 15 mils of sunlight-resistant, riser-rated PVC. It’s operating temperature is rated at 140°F.

Current Lighting’s Compass CUW emergency light is fully sealed and gasketed for outdoor use, with die-cast aluminum housing. It uses universal 100–300V AC input and includes self-test/self-diagnostics. It has an LED life cycle of more than 10 years and offers normally on and emergency lighting. It is wet-location listed and can be used in temperatures between 32°F and 122°F.

ABB’s ReliaGear XFMR 3-phase Servicenter integral transformer and distribution panel incorporates a Type QL transformer (3-phase), a primary main circuit breaker, a secondary main circuit breaker and a load center style breaker panel. It can be used wherever 240V, 480V or 600V primary is available and 208Y/120V secondary circuits are required.

Fiber Instrument Sales’ F1LYNXWKS FIS LYNX fiber optic cleaver with lighted work station has a 6-in. steel work tray and includes the hardware for the Mount Lynx cleaver and Bobtail assembly tool. It cleaves 250 um coated or 900 um buffered fiber with a 0.5-degree variance. The optional work station has a magnetic mount gooseneck LED work light.

Resideo’s First Alert VX3 HD outdoor video camera has a diagonal field of view of 147 degrees, and it features a two-way audio. Advanced event detection differentiates between people, vehicles and more.

Schneider Electric’s EGB14020 E-Frame mini circuit breaker is 20A, 1-pole and has an operating voltage of 277V AC. It is designed for Square D NF lighting panelboards. It has a thermal-magnetic trip unit with a signal indicator. It provides a 65-kA max interrupt rating at 120V AC and has a hold current of 270A. 

Cerrowire’s TFFN copper wire may be used as fixture wire, machine tool wire or appliance wiring material. When used as Type TFFN, the conductor is rated for use up to 194°F. When used as Type MTW, it is rated for use up to 194°F in dry locations and up to 140°F in wet locations or when exposed to oil or coolant. When used as AWM, the conductor is rated for use up to 221°F in dry locations.

Klein Tools’ VDV226-005 crimping tool is a modular crimp-connector installation tool for voice and data applications with the Pass-Thru RJ45 connector plug. It crimps and trims pass-thru RJ45 connectors onto paired conductor cables (round STP/UTP cables).

Fire-Lite’s Notifier Inspire series ACM-30 annunciator receives status information and transmits commands to the fire alarm control panel. It can remotely execute control panel functions and display the system’s status. It features color-programmable LEDs.

Axis Communications’ AXIS XC1311 explosion-protected network horn speaker is certified for Class/Division 1 and Zone 1. It can play a prerecorded or live message in response to system alerts from a camera with analytics or real-time severe weather alerts. It’s designed for 24/7 operation and can work in –40°F to 140°F temperatures.

Emergi-Lite’s JS series steel housing, emergency lighting battery unit is available in 6V and 12V models with up to 54W capacity. It features low-voltage disconnect, automatic brownout protection and center-to-center spacing of up to 100 feet. Heads are available in thermoplastic or decorative die-cast aluminum. 

Alpha Wire’s 9102 300V coaxial cable has a 10X cable diameter bend radius and a maximum pull tension of 15.4 lbs. It has a 20 (SOLID) AWG BCW conductor and is rated for temperatures from 14°F to 257°F.

CommScope’s FST-ACC001 fiber optic protective splice sleeves are designed for heat shrink and single-fiber, fusion-type splicing. Available in a pack of 50, they  can be stored in temperatures from –40 °F to 185 °F.

Assurance Emergency Lighting’s L30-DC-CEC LED emergency driver is designed for use with Class 2 LED drivers. It provides a constant 30W to the LED load for 90 minutes. It can be used in temperatures from 32°F to 131°F.

Hilti’s CFS-PL firestop plug is a reusable, sealant-free, intumescent firestop solution for permanent or temporary cable openings in walls and floors. One-sided wall installation is possible. The application temperature range is
40°F to 104°F.

Hikvision’s DS-2XC6142FWD-IS IR fixed mini-dome anticorrosion network camera produces images with up to 4 MP resolution. The 316L stainless-steel enclosure is water- and dust-resistant for use in outdoor and corrosive environments.

Jonard Tools’ PSI-15 Quick Sleever tool aligns fiber to the holes of protection sleeves. A conical fiber feed surface guides fiber to the protection sleeve, and when one sleeve is loaded and removed, another automatically falls into place. It can hold up to 15 protection sleeves, each ranging from 1.57 in. to 2.36 in. long.

Eaton’s Bussmann series HLS-C fuse holder is designed for use in telecom applications. It can be used with GMT type indicating series and has no flanges. It has a tin-plated, bifurcated copper terminal.

Honeywell’s SSV Series alarm bell operates on 120V AC and is available in a DC model. It is used for fire and burglary systems or other signaling applications, and it is approved for indoor and outdoor use.

Current Lighting’s Compass CUSO LED light emits 1,600 lumens in AC normal use and 600 lumens in an emergency. Suitable for outdoor applications, it is wet-location listed. It includes a photosensor and PIR motion-detection sensor.

Paige PumpWire’s P7371-SP 5,000V electrical cable is an armored flat, submersible pump cable with EPDM insulation. It has a 2/0 AWG gauge and is shielded 3C. It can operate in temperatures from –60°F to 250°F and withstand voltages of 11.5 kV AC and 35 kV DC.

Agiltron’s 1x1 NanoSpeed high-speed fiber optical switch has a solid-state, all-crystal design and features less than 1 dB loss, a 300 kHz repetition rate and 100 ns rise/fall. It can be used in temperatures from 14°F to 158°F. It is bidirectional and selectable for polarization-­independent or polarization-maintain by fiber type.

Ultra’s HyperSpike TCPA-10 speaker is rated for indoor and outdoor applications. Its 90-degree acoustic beam produces 129 dB, and it is designed for high-ambient environments. It has a universal mounting interface.

Ascend Tools Inc.’s 6½-in. light-duty, high-leverage cable cutter is designed to cut soft stranded electrical wire for use in electrical, fiber, datacom and telephone installation, and service applications. It is spring-loaded, and its blades are made from high-carbon alloy steel with heat treatment to harden the wire-cutting notch.

Current Lighting’s Compass 46T222 LED emergency light is damp-location rated and includes an emergency battery backup with 90 minutes of illumination. It can operate in temperatures from 68°F to 86°F. It is ceiling- or wall-mounted, and the lamp heads are adjustable. 

Cerrowire’s fire alarm/NPLFR MC cable has two-, three- or four-circuit THHN/THWN conductors and a green insulated ground. An interlocked aluminum armor is applied over the entire construction.

Bosch’s 51001 IR, HDR Flexidome camera provides a 360 degree panoramic overview in 12 MP. It has edge or client-side dewarping and can operate in temperatures from 40°F to 122°F.

Fiber Instrument Sales’ F6222 Wilcom optical fiber identifier with core power measurement detects the presence and direction of light or 2-kHz, 1-kHz or 270-Hz modulated tones by creating a macro-bend in the fiber. It is used for single-mode applications and features three interchangeable heads.

Siemens’ Cerberus PRO 50 point panel system is designed for small to mid-size facilities. It supports up to 50 addressable devices on Class A or Class B circuits. It has a custom PAD-5 power supply and features isolation device capability.

Corning’s multifiber connector cleaning kit is designed for cleaning fiber optic connector end-faces, whether fully accessible or in an adapter, local area network, central office or outside plant environment. It can perform a dry clean, wet clean or combination. The cleaners dissipate static when the end-face is pulled across a cleaner surface or a stick inserted into an adapter.

Belden’s 83803 fire alarm cable is size 12 AWG, 300V, made of tinned copper with three conductors. It is suitable for fire alarms, indoor and outdoor applications, low-voltage analog signals and low-voltage control. It can operate in temperatures from –94°F to 392°F.

Vivotek’s wall-mounted, NDAA-compliant FT9361-R facial recognition tablet has a camera lens, display screen, status bar and card reader. It can save up to 50,000 profiles and recognize faces at a range of 1 ft. to almost 5 ft., and has an audio tamper switch alarm.

Benefast’s STI SpecSeal FS100 firestop-ready sleeve is available in 1-, 2- and 4-in. diameters. Made of steel, it is designed to work in temperatures from –10°F to 120°F. It is sized for assemblies up to 10-in. thick. The kit includes a preformed steel sleeve with rolled edges, steel escutcheon plates with intumescent gaskets, wall labels and a dosage of SpecSeal SSP firestop putty.

Schneider Electric’s Mini Power-Zone unit substation is a 1-phase sealed transformer. Its primary voltage is 480 V and its secondary voltage 120/240 V. It has 10 circuits and an insulation temperature of 365°F.

Evenlite’s Tufflite IPX industrial emergency lighting unit is for use in IP-66 and NEMA 4X wet locations, and it is approved for use in splash zones equivalent to NSF2. It has a die-cast aluminum enclosure and a vandal-resistant lens. A universal mounting pattern and keyhole slots are cast in the back plate.  

Fire-Lite’s ES-50XP addressable fire alarm control panel is a turn-key fire safety solution with a dual-path (IP/cellular) and dual-cellular (AT&T/Verizon) 5G LTE-M cellular communicator. It supports up to 50 addressable devices, including multicriteria fire and carbon monoxide detectors. It has four programmable function keys, and an integrated SWIFT display driver and annunciator built into the panel. It is ETL- and CSFM-certified.

Thorlabs’ FS201 fiber inspection scope features 200X magnification to examine a fiber’s core, cladding and surrounding ferrule. The coaxial setting has symmetric lighting for high-detail inspection, and off-center lighting for high contrast in the oblique setting. It includes two adapters. One for FC-/ST-/SC-terminated fibers and the other for SMA905- and SMA906-terminated fibers. 

Senko’s SN uniboot enables four duplex SN connectors to be patched simultaneously in one operation. Base-8 and Base-2 patching flexibility means it can be used as a high-density trunk connection, 4-lane transceiver link or duplex patching interface. It features TELCO grade ceramic ferrules.

Ideal Electrical’s FT-45 feed-thru modular plug crimp tool trims twisted-pair wires flush with connector ends and works on feed-thru, standard and shielded connectors for Cat 5e or Cat 6. At 5.5 in. long and 0.5 lbs., its compact design is 2/3 the size of traditional crimpers. The cutting blade lasts for over 2,000 cuts.

Fiber Instrument Sales’ F1S2540C-50 FIS fusion splice protection sleeve is clear, slim and has a diameter of 40 mm. It protects the fused juncture between two fusion-spliced optical fibers and prevents the area from bending or flexing. It comes in a 50-pack.

AFL’s Cletop optical fiber connector cleaner removes dust and contaminants from various connector types. It features a push-button shutter operation and anti-static properties. It is for field use as well as use in labs and assembly lines. The replaceable clean tape reels yield more than 400 swipes per tape.

American Wire Group’s type UF-B copper underground feeder is 600V and designed for direct burial, for use in dwellings not exceeding three floors above grade, as underground feeder to outdoor lighting or an apparatus or as general branch circuit wiring. It is made of bare annealed copper per ASTM B-3 or stranded conductors per ASTM B-8. It has color-coded PVC insulation with a nylon jacket and type THHN inners rated for 194ºF.

Jameson’s 18-FFPI flat-drop fiber driver is designed for fiber installation. It pushes flat-drop up to 300 feet in less than 10 minutes. It functions in forward and reverse, and fiber can be loaded or unloaded mid-span. At 1.4 lbs., it is built for handheld, single-user operation, and can be driven with any cordless drill. 

Westgate’s LEDTFX-2 LED emergency unit is wet-location-listed, with seamless silicon gaskets. It features an integral breather vent, two fully adjustable 1.5W LED heads and high-impact thermoplastic housing. It has 4W of remote capacity and can operate in a temperature range of 68°F to 122°F. 

Cerrowire’s thermostat wire is a Class 2 power-limited cable for use in thermostat controls applications and bell and alarm systems. It is not to exceed 150V when installed. It features 18 AWG solid bare copper conductors with PVC insulation. It comes in 2-, 3-, 5- and 7-conductor constructions with a brown PVC jacket.

Hilti’s CFS-MS firestop metallic sleeve is used for cable penetrations for single and bundled cables and concrete, masonry and drywall. It is suitable for small circular openings in walls and electrical, low-voltage, mid-voltage and telecom use.

Ideal Electrical’s coaxial strip and crimp tool is designed to terminate coaxial cable. Precision, form-ground stripping holes remove the outer jacket and insulation for RG-59 and RG-6 coaxial cable. The tool offers three crimping nests for crimping F-connectors and ring terminals.

Alpha Wire’s Premium 3051 hookup wire is suitable for a temperature range of –40°F to 221°F. The conductor is made of 22 AWG tinned copper at a diameter of 0.03 in. The cable has a maximum pull tension of 5½ lbs.

Newport’s F-C5-F3-1310 fiber optic collimator accepts FC-type fiber connectors and changes a 1,310 nm beam exiting a single-mode fiber to a 2.8 mm beam. Applications include laser-beam delivery systems and coupling the output of a fiber into a detector. Broadband AR-coated, glass aspheric lenses are used for low insertion loss. 

Corning’s ADP-KDLC-CCPRF-CLX fiber optic adapter features a reduced-flange mount and ceramic sleeve. It is designed for cable assembly housing and manufacturing environments and local area networks at the workstation outlet.

Hubbell’s fiber optic splice tray is for 12 x 12 ribbon and features integrated wire ties for fiber management. It is 10 in. long and features all-aluminum construction and a self-adhering, foam fiber protector. It can accommodate up to 144 fibers and has 13 splice capacity.

Klein Tools’ radial coaxial cable stripper has high-carbon-steel cutting blades that automatically adjust to different cable diameters. It features two-level cable prep and stripping in one step to 5/16 in. and ¼ in (7.9 mm and 6.4 mm). It preps and strips five different series of RG cables including RG-59, RG-6, RG-6Q, RG-11 and RG-7. A finger loop enables controlled rotation. It is designed for installers who work with utility and standard cables.

Nicor Lighting’s EML1-LED emergency light is damp-location-rated and fire-retardant, with a UL-947-0 flame rating. The low-profile lighting unit has injection-molded, thermoplastic ABS housing and adjustable heads. It has an input power of 1.15W at 120/277V AC and features a universal mounting plate.

Johnson Controls’ Illustra Flex 4K box camera is rated for indoor use. It is IK10-rated for vandal resistance and IP-68-rated for protection against dust and water damage. It has three zones of motion detection and is designed for a temperature range of –4ºF to 122ºF. 

Agiltron’s fiber-coupled acousto-optic modulator/shifter is optimized for low optical loss of 1.5 dB and has 80 MHz resonance frequency. It features optical power handling up to 20W and has a wide wavelength selection from 450 to 2,300 nm.

Jonard Tools’ OFI-100 advanced optical fiber identifier features a built-in VFL and power meter. It identifies traffic direction and frequency with an audible warning, and the LCD display shows relative core power, signal direction and battery life. It includes a reversible adapter and protective rubber sleeve to prevent damage.

Senko’s smart checker MPO tester 12 fiber verifies the polarity for 8F and 12F MPO assemblies to TIA 568 methods A, B and C. It tests angled and flat MPO assemblies. A full charge yields 5 hours of continuous service. 

Circa Telecom’s 3B1E heavy-duty, three-element gas tube, five-pin surge protection module provides transient and power fault protection for most standard telephone line applications. It features a self-resetting PTC current limiter that protects against “sneak current” faults.

American Wire Group’s AA-8000 Type SE, style R aluminum cable can be used as an aboveground service entrance cable, as a panel feeder and in branch circuits. It is rated at 600V and can be used in wet and dry locations.
The jacket is sunlight resistant and flame retardant.

Federal Signal’s DS100X hazardous location 100W amplified speaker can be used as a warning and alerting device in hazardous locations. It is rated at 120 dBa for tones and 114.5 dBa for voice at 10 feet. It broadcasts live voice,
text-to-speech and prerecorded voice or tone files by connecting to a controlling speaker.

Corning’s single-fiber port cleaner for 2.5 mm connectors offers over 525 cleanings and removes skin oil, hand lotion, Arizona road dust, pre- and post-mate graphite, salt and isopropyl alcohol and distilled water residue. 

Vivotek’s SD9394-EHL IR PTZ camera has NEMA 4X-rated housing and can be used in temperatures between –40°F to 131°F. It features optical zoom, smart tracking and 4K resolution. The smart infrared technology eliminates hotspots and overexposure.

SECO-LARM’s SL-126Q/G xenon tube strobe light is built for temperatures from –22°F to 140°F. It lasts for 300 continuous hours and has 2-wire installation. It comes in amber, blue, clear, green and red. The lens is made of high-impact and heat-resistant Acryrex.

Fiber Instrument Sales’ crimp tool die and handle aids in precision crimping that meets nonoptical disconnect requirements and pull strength demands. It includes three crimp sizes: 0.128 in. hex, 0.137 in. round
and 0.190 in. round. Additional dies are available.

American Wire Group’s XHHW-2 low-friction power cable can be used in construction, conduit or recognized raceways for services, feeders and branch circuit wiring in wet or dry locations. It can be used in temperatures up to 194°F. It is designed to be installed without pulling lubricant.

Senko’s smart strip flat drop 3 x 2 tool uses a dual cutting blade to strip the jacket and cut the strength rods of 3 mm x 2 mm flat drop cables. The tool is compact and protects the cable’s fiber from nicks and scratches. It also has a view length guide to help set the desired strip length.

Jonard Tools’ FC-600 precision fiber cleaver automatically cleaves the fiber, rotates the blade and collects fiber scraps in one step. The blade automatically rotates after each cleave and can be used for 52,000 cleaves before needing to be replaced.

Isolite’s ELED architectural outdoor LED light provides 1,050 lumens and has a 50,000-hour lamp life. It is UL 924 listed for wet locations and is suitable for NEMA 4X applications. The cold-weather option can be used in outdoor applications to –4°F. A long-life, high-temperature nickel-cadmium battery maintains 90 minutes of emergency lighting, and brownout detection ensures emergency illumination during periods of low line voltage. 

Isolite’s LMIGN2 emergency light is compact and fully recessed. It features a universal (wall or ceiling) back box provided with fully adjustable mounting hardware to suit many applications.

Cerrowire’s sound and security wire can be used as security system cable or for audio and intercom system applications. It is flame-retardant and shielded to reduce signal interference.

AutomationDirect’s Patlite NE series visual and audible-visual signaling beacon is available as visual-only beacons or as combination devices with a buzzer or selectable tone alarm and signal beacon. It is available in red, yellow, green, blue and clear models. 

Resideo Honeywell Home’s IPCAM-WOC2 is designed for outdoor applications. It offers a 117-degree field of view angle, an internal Bluetooth antenna and audio analytics with intelligent sound detection.

Jonard Tools’ TK-283 fiber cleaning kit provides all the tools needed to clean fiber end faces, including cleaning fluid, wire and Kevlar cutting shears, a fiber optic stripper and a carrying case. 

Honeywell’s weather-resistant horn loudspeaker offers high sound pressure and is designed for industrial use. For increased protection, it is equipped with a built-in ceramic terminal and thermal fuse. 

ICC’s universal compression tool is suitable for most RCAs, BNCs and F-type connectors. It uses vertical compression, which provides a quick method of terminating and compressing connectors on cables.

Seco-Larm’s Enforcer IP corner-mount camera provides color saturation when recording at night. It has a low profile and features a wide-angle lens, which is useful for elevators and corners.

Teledyne Flir’s Extech DV25 voltage detector includes audible and visual indications, double-molded housing and a built-in LED flashlight. The low range measures down to 24V.

Southwire’s MilSpec COAX cable can be used for mobile phones, Wi-Fi, satellite antennas, terrestrial microwaves and medical, military and air traffic control applications. It features 95% bare copper braid shielding.

Isolite’s outdoor wet location emergency light is designed for indoor and outdoor areas, damp locations and cold-weather applications. It features eight LEDs and offers 90 minutes of emergency lighting.

Jonard’s MDC-14 microduct tube cutter features a heat-treated stainless steel blade that cuts through PVC, nylon and other materials up to 56 in. in diameter. It has thermoplastic rubber grips. 

Orbit Industries’ EL2LR recessed LED emergency light features dual-voltage input and two fully adjustable 1W LED lamp heads. It offers a minimum of 90 minutes of emergency operation and a push-to-test switch.

Honeywell’s 35 Series A.I. IP camera offers high resolution to cover large areas, providing clear images during both day and night. It features smart motion detection based on humans and vehicles to reduce false alarms.

Bosch’s FMR 7036 four-wire LCD annunciator keypad is used to establish the location of a fire alarm. The display shows alarm and status messages. It features silence and reset buttons and a built-in keyswitch. 

Senko’s smart cleaner cassette cleans end faces of all single-fiber and unpinned (female) multifiber connectors. Its compact size is designed for use on production lines and installation sites. 

ICC’s plug-and-play 1 RMS fiber optics blank patch panel comes with four spaces to hold cassettes. It is designed so cassettes can be snapped into the panel without tools. The steel frame has a black powder-coat finish to protect against wear and corrosion. 

Isolite’s ELF flush-mounted architectural emergency light features 4 integrated 1W LED heads that produce bright lights. The LEDs are adjustable and allow up to 50 ft. of light spacing. It is available in textured white and black finishes.

Fiber Instrument Sales’ fiber interconnect panel attaches to standard single-gang electrical outlets in new or existing pathways. It accepts LGX style adapter plates, accommodating 24 LC style connectors. It comes in black, white and custom colors and is 5.5 in. by 7.5 in. by 1.35 in. 

Southwire’s multiconductor riser shielded cable is designed for commercial audio, security, public address, intercom, alarm and access control circuits and power-limited controls. It is made of bare copper. 

Vivotek’s SC8131 stereo counting camera provides real-time tracking video and generates data such as people counting and flow path tracking. It is designed for retail applications, as it aids in promotional evaluation, staff planning and service schedule control.

Hammond Power Solutions’ HPS Sentinel H energy-efficient, harmonic-mitigating distribution transformer is rated for 600V and below. Applications include data centers, internet service providers, telecom sites, call centers, broadcast centers and more.

Isolite’s ERT recessed T-bar emergency light is designed for installation in T-bar type grid ceiling systems. It features two fully adjustable, top-mounted par 36 style lighting heads in high-impact thermoplastic standard. It can power multiple remote heads. 

Teledyne Flir’s Saros DM-Series pan-tilt-zoom thermal security camera captures video in complete darkness, bright sunlight and through smoke, dust or light fog. A built-in 4K visible light camera operates alongside the thermal sensor to capture minute details in low-light conditions.

Fiberfox America’s Mini 60A one-click operation cleaver includes an auto fiber chip collector. It features a perfect degree cleaving angle, universal fiber holder, digital counter and easy blade rotation.

ICC’s wire cutter and stripper tool features a curved handle that prevents hand muscle fatigue and a safety lock that holds the blades together when inserted into a tool holster or pocket. It is lightweight and compact, and can be used for gripping and clamping.

Honeywell’s HyperSpike linewave audio signaling and notification speaker produces clear voice commands with even coverage across the listening plane. It also focuses the acoustic pattern away from surfaces that cause unwanted reflections in reverberant spaces.

Senko’s smart cleaner 2.5 mm is designed to clean residues and dust from end faces. The blue end-cap aligns the cleaning tip to unmated cable assemblies and pin termini in hardened connectors. It will last 750 cleanings and is refillable.

Honeywell’s Agora LED anti-panic headlight has one hour of battery backup and LED indicators that show the status of the battery and light source. It is designed for large indoor areas, including sports halls and warehouses. 

Platinum Tools’ TDG310K1C digital tone and probe kit enables users to trace and locate single or bundled cables connected to unpowered or active networks such as phone lines, network cables or coaxial cables. It has audible and visual signal strength indicators and a built-in flashlight.

Jonard Tools’ fiber optic tweezers are made of nonmagnetic stainless steel and can handle electrical wire, fiber optic cable and small electronic components without damaging them. They feature a fine tip with rounded edges and a lightweight, pocketable design. 

Senko’s 1.25MM NeoClean stick cleans residues and dust on fiber optic end-faces. The fabric tip allows for cleaning that eliminates the need for a solvent. The notched handle is customizable.

Jameson’s 32-70-O Hawkbill high-carbon steel all-purpose 10-in. knife is designed for heavy-duty line work. It has a curved, double-edged, ice-tempered blade to cut through cable jackets and insulation. There is a cushioned, ergonomic handle that features an expanded end to protect from hand slippage.

Hubbell’s plenum-rated multimode duplex CS-CS OS2 fiber optic patchcord uses compact duplex connector technology and provides high density in LGX Max cassettes. The pull tab enables a quick disconnect.

Isolite’s UL 1008 transfer switch uses standard light fixtures as emergency sources. It is UL 924 listed and compliant with National Electric Code Article 700 (2017). Universal input voltage and multiple mounting methods allow use in a variety of applications.

Omnitron Systems’ iConverter 10/100M2 is a copper-to-ethernet fiber media converter. It may be used for early fault detection and performance monitoring. The fixed fiber port supports multimode and single-mode dual fiber with ST, SC and LC connectors. 

Bosch’s LBC3018/01 rectangular cabinet loudspeaker is designed for speech and music reproduction. It features a metal enclosure and customizable colors, and it can be surface- or recessed-mounted. It operates in temperatures between 10ºF and 131ºF.

FiberFox America’s Mini 4S+ fusion splicer kit has an active alignment splicer with four motors and comes with a thermal stripper and precision cleaver. It features a touchscreen and can splice single-mode fiber in 6 seconds with a continuous heating mode. 

Corning’s DualDrop cable is designed for outdoor and indoor environments. The design features a fully waterblocked and UV-resistant drop cable inside a rugged outside plant. It is suitable for aerial, facade, direct buried and duct installations.

Orbit Industries’ EL2H-WP-LED dual-voltage wet-location emergency light features two fully adjustable LED lamps and 90 minutes of emergency operation. It is made of thermoplastic and is flame-retardant. It has a universal mounting plate for installation. 

Teledyne Flir’s Elara R-290 compact ground radar is used to detect intruders as part of a larger video surveillance system. It can track targets in all weather and lighting conditions. It features a 90-degree field of view.

Vivotek’s IP9164-LPC network camera features night visibility for low-light conditions, smart stream technology to optimize bandwidth efficiency and an anti-glare headlight filter design.

Axis’ P39 Network Camera Series is specifically designed for mobile video surveillance on board vehicles such as buses, trains and subway cars. It is dust- and water-resistant and can withstand vibrations, shocks, bumps and temperature fluctuations.

Platinum Tools’ pro punchdown kit includes a Velcro, belt-attached pouch for secure containment, a NeverDull 110 punchdown blade and professional electrician’s scissors.

Jonard’s TSFB-125 thermal stripper is designed to thermomechanically remove coatings from optical fibers with cladding. It is compact and features adjustable temperature and time settings that enable it to adapt to a wide range of acrylate coatings and cladding sizes.

ICC’s single-blade punchdown tool can be used for wiring blocks, patch plugs, modular connectors, faceplates and patch panels. The high-impact setting is used when seating 110 connecting blocks into 110 wiring blocks.

Bosch’s LBC3086 loudspeaker unit is a 6W, dual-cone loudspeaker with an integrated circular metal grille. It is designed for voice alarm systems and features built-in protection to ensure that, in the event of a fire, damage to the loudspeaker does not result in failure of the connecting circuit.

Hubbell’s dome closure 790 grounded standard tray holder has a splice capacity of 288 for single fusion and 864 for mass fusion. The backbone cable ports accept up to 1.250 in. optical density.

Isolite’s GNSD MR16 emergency luminaire is self-contained and can be recessed into walls or ceilings during normal lighting conditions. It provides 90 minutes of emergency lighting, with selectable lamp positions to ensure light distribution.

Viking’s 18/6 solid copper nonshielded plenum CL2P thermostat cable features a PVC jacket, polypropylene insulation and a temperature rating of -4°F to 140°F. It comes in a 250-ft. spool.

Jonard Tools’ fiber optic power meter is used for measuring the absolute optical power and relative power loss in fiber optic cables. It has six preset calibrated wavelengths. The LED screen is back-lit and a 10-minute auto-off helps preserve battery life.

Hyperline’s optical patch cord is made of fiber optic cables and connectors and is tested prior to sale. It is available in different varieties such as single-mode 9/125 (OS2) and multimode 50/125, 62.5/125 (OM1, OM2, OM3, OM4) optical fiber, single and dual.

Axis Communications’ Q35 dome camera captures images in up to 8-megapixel resolution. It features analytics with deep learning and an IR-shielded dome that prevents reflections. It is vandal- and impact-resistant.

ICC’s ergonomic, 4-pair punchdown tool helps reduce the number of punchdowns required. It provides a maximum of 50 kg impact and can terminate 4-pairs of wires simultaneously. 

Cablcon’s List 3 DC power cable has a copper conductor and class B flexible strand. It is designed for use in telecommunication power distribution. The woven cotton braid is saturated with a heat- and moisture-resistant, flame-retardant compound. Its maximum operating temperature is 90ºF in dry environments and 75ºF in wet areas. 

Cerrowire’s twisted bell wire is commonly used for low-voltage battery transformer circuits, including connecting call-back, buzzer systems, door chimes and furnace controls. Both solid copper conductors are insulated with heat- and moisture-resistant PVC.

Vivotek’s CC9160-H network camera is designed for panoramic indoor surveillance. It is suitable for retail settings, convenience stores, hotels and more. The mounting design facilitates easy installation onto any wall, and it features a built-in microphone.

Senko Advanced Components’ SN loopback tool is commonly used for burn-in testing and network troubleshooting. The high-density push-pull tab design and housing make it suitable for a variety of uses. 

Fiber Instrument Sales’ fiber optic cleaning station provides immediate access to cleaning supplies for technicians. These cleaning kits are wall-mountable and include clean, dry wipes; cleaning solution; auto-advance connector cleaning and back

Southwire’s low-voltage dimming or luminaire cable is plenum-rated. It is designed for dimming, luminaire, commercial audio and general security and sound applications. It is made of stranded bare copper and is twisted and jacketed. 

Hilti’s CP 653 BA firestop sleeve is suitable for firestopping cable penetrations for single and bundled cables. It can be used in small to medium-sized circular openings in walls, ceilings and floors. It may be used in concrete, masonry and drywall and features a twist-to-close mechanism for repenetration.

Isolite’s NEMA 12 27–140W emergency light is designed for use in hazardous indoor applications where there is dust, dirt, lint, dripping water or condensation. It is made with a 20-gauge steel cabinet with full welded corners.

Platinum Tools’ fiber optic cleaner works with almost all common fiber optic sizes and connector types, allowing users to clean connectors and ports. It features a silk thread, which provides over 900 cleanings and advances automatically after each use for particle-free connections.

Axis Communications’ P91 dome camera features a compact design and an out-of-box field of view in 3MP resolution with no blind spots. It is vandal-resistant (IK10) and suitable for PoE over 2-wire for elevator installations. 

Corning’s gel-free, triple-jacket, double-armored cable is designed for direct-buried installations. The loose tube design provides stable performance over a wide temperature range and protection against rodents, UV radiation, fungus, abrasions and other environmental factors. 

Platinum Tools’ 15062C cable stripper is designed to slit and ring cables, buffer tubes and jackets on fiber optic cables with a diameter of 1.2 mm to 6.4 mm. It is compact and can be used in confined spaces.

Senko’s smart cleaner mini 2.0 mm tool is designed to wipe away dust-based contamination on 2 mm-based connector end-faces. The compact length enables it to be used in tight spaces, and the tool is designed for applications where flammability is a concern. 

Flir’s FH-Series ID multispectral fixed camera integrates thermal imaging with 4K visible imaging to provide perimeter security. Built-in network analytics detect and classify human and vehicle threats moving at high or low speeds.

Mackwell’s N-Light Connect touch panel is an emergency lighting testing and monitoring system. It features live system status diagnostics and can be networked with other panels to monitor larger DALI systems. 

Johnson Control’s Illustra Pro micro camera features a wide dynamic range and is designed for applications such as ATMs, elevators and entrances where backlighting can be a challenge. It is equipped with horizontal view and corridor mode. 

Cerrowire’s 18 AWG multiconductor copper wire may be used as sprinkler system wire for connecting field and central controls up to 30V. It is available with 4, 5, 7 or 10 conductors and in 50-, 100- and 500-ft. lengths. It is sunlight-resistant and suitable for underground applications. 

Bosch’s flexidome camera is corner-mounted with a no-grip design for safety. It offers 1.5 MP resolution imagery of an entire small room, including directly beneath the device. It is enabled for night vision up to 30 ft. and is water-resistant.

Hilti’s CFS-MSL modular fire sleeve can be used for firestopping low-voltage cable penetrations for single and cable bundles. It is made for small- to medium-sized rectangular openings in walls, ceilings and floors and is designed for frequent cable moves and additions.

Southwire’s signal speaker cable enables users to interconnect amplifiers and speakers for high-end audio transmission stereo systems. It is in-wall-rated and made of stranded bare copper. It is UL listed for use in NEC power-limited circuits, except those routed in risers or plenums. 

Potter Electric Signal’s ARC-100 is an analog/addressable releasing fire alarm system with a total capacity of 100 addresses. Additional system capacity is achieved using multipoint SLC modules. Each SLC may be comprised of any combination of smoke sensor, heat detectors or modules. 

Hyperline’s HT 3140 impact and punchdown tool enables the user to terminate cable in cross-connect panels, blocks and keystone jacks. It is spring-loaded for fast, low-effort seating and terminating. It features rotatable impact control and spare blade storage, and it is suitable for network applications.

Corning’s 12-fiber MTP jumper cable allows for the seamless migration to higher data rates for multimode systems in a data center. It is based around pinned or nonpinned 12-fiber MTP connectors.

Chatsworth Products’ manager panel provides fiber slack management and a mounting surface for a small fiber manager. Secured under the outermost mounting unit, it takes up no mounting space within the cabinet. 

Viking Electronics’ PB-3-IP VoIP under-mounted panic button provides a quick, reliable way to make a silent emergency call. It functions as an SIP end point connecting with a single Cat. 5/6 cable from your PoE switch. It can be programmed from any PC on the same LAN or remotely using a static IP address. It can be programmed to automatically deliver a digital announcement identifying the location of the emergency call.

Seco-Larm’s multifunction timer/counter features low-current draw and seven modes that are easily programmable with push buttons and LED display. The timer can be set to trigger a notification as a red LED, buzzer and/or a Form C relay output (10A at 24V DC). It can also be triggered by N.O. positive or N.C. negative input or by powering up the unit.

Viking Electronics’ E-series entry phones can use features available on the Panasonic door phone station card. The E-series entry phone is available in multiple colors and sizes. Surface- and flush-mount options also are available. Color video cameras and proximity readers are available for select models.

STI’s round and rectangular sirens and strobes can be used with a cabinet, or mounted to doors, walls and ceilings. The round model (STI-SA5500) has a choice of eight strobe flash patterns with speed selection, and it includes a backup battery feature. The rectangle model (STI-SA5600) has a tamperproof lens option. Both models have a 12–24V DC power supply.

Amerlux’s electrical receptacle, used in conjunction with the Avista pedestrian light engine, transforms any lamp post into a wireless communication device that can connect to larger municipal networks. It leverages the existing circuit boards in LEDs to become compatible with a variety of sensors.

FSR’s HuddleVU collaboration bundle is offered in five different prepackaged systems that accommodate two to four users. Each bundle includes a table box, a switcher and all the necessary cables. They can be upgraded with optional cable retractors. Systems can also include FSR’s HuddleVU Air, a wireless four-input auto-switching presentation unit featuring two HDMI in, one VGA in, and one wireless input.

Eaton’s Home Automation Hub enables users to integrate devices into their smart home system and control them. Users can manage lighting, security systems, locks, garage door openers, thermostats, cameras, entertainment networks, sensors and more. Users can access the system and connected devices away from home.

DSC’s (part of Tyco Security Products) DSC Touch home-automation solution includes a 7-­in. touchscreen, Android-­based software, Alarm.com integration, and dual-path connectivity with integrated Wi-­Fi, cellular and Z-­Wave-enabled technology. The integrated panel camera takes a picture of the person who disarms the system and captures images during an alarm event. It features two-­way voice communications, one-­touch arming and disarming, a panic button, an SD card slot to add photos for the photo frame feature, and built-in help videos.