Current Lighting’s Compass CUW emergency light is fully sealed and gasketed for outdoor use, with die-cast aluminum housing. It uses universal 100–300V AC input and includes self-test/self-diagnostics. It has an LED life cycle of more than 10 years and offers normally on and emergency lighting. It is wet-location listed and can be used in temperatures between 32°F and 122°F.

Emergi-Lite’s JS series steel housing, emergency lighting battery unit is available in 6V and 12V models with up to 54W capacity. It features low-voltage disconnect, automatic brownout protection and center-to-center spacing of up to 100 feet. Heads are available in thermoplastic or decorative die-cast aluminum. 

Current Lighting’s Compass CUSO LED light emits 1,600 lumens in AC normal use and 600 lumens in an emergency. Suitable for outdoor applications, it is wet-location listed. It includes a photosensor and PIR motion-detection sensor.

Current Lighting’s Compass 46T222 LED emergency light is damp-location rated and includes an emergency battery backup with 90 minutes of illumination. It can operate in temperatures from 68°F to 86°F. It is ceiling- or wall-mounted, and the lamp heads are adjustable. 

Evenlite’s Tufflite IPX industrial emergency lighting unit is for use in IP-66 and NEMA 4X wet locations, and it is approved for use in splash zones equivalent to NSF2. It has a die-cast aluminum enclosure and a vandal-resistant lens. A universal mounting pattern and keyhole slots are cast in the back plate.  

Nicor Lighting’s EML1-LED emergency light is damp-location-rated and fire-retardant, with a UL-947-0 flame rating. The low-profile lighting unit has injection-molded, thermoplastic ABS housing and adjustable heads. It has an input power of 1.15W at 120/277V AC and features a universal mounting plate.

Isolite’s LMIGN2 emergency light is compact and fully recessed. It features a universal (wall or ceiling) back box provided with fully adjustable mounting hardware to suit many applications.

Isolite’s outdoor wet location emergency light is designed for indoor and outdoor areas, damp locations and cold-weather applications. It features eight LEDs and offers 90 minutes of emergency lighting.

Orbit Industries’ EL2LR recessed LED emergency light features dual-voltage input and two fully adjustable 1W LED lamp heads. It offers a minimum of 90 minutes of emergency operation and a push-to-test switch.

Isolite’s ELF flush-mounted architectural emergency light features 4 integrated 1W LED heads that produce bright lights. The LEDs are adjustable and allow up to 50 ft. of light spacing. It is available in textured white and black finishes.

Isolite’s ERT recessed T-bar emergency light is designed for installation in T-bar type grid ceiling systems. It features two fully adjustable, top-mounted par 36 style lighting heads in high-impact thermoplastic standard. It can power multiple remote heads. 

Honeywell’s Agora LED anti-panic headlight has one hour of battery backup and LED indicators that show the status of the battery and light source. It is designed for large indoor areas, including sports halls and warehouses. 

Isolite’s NEMA 12 27–140W emergency light is designed for use in hazardous indoor applications where there is dust, dirt, lint, dripping water or condensation. It is made with a 20-gauge steel cabinet with full welded corners.