Corning’s multifiber connector cleaning kit is designed for cleaning fiber optic connector end-faces, whether fully accessible or in an adapter, local area network, central office or outside plant environment. It can perform a dry clean, wet clean or combination. The cleaners dissipate static when the end-face is pulled across a cleaner surface or a stick inserted into an adapter.

Arlington Industries’ listed pop-up floor box kit with stainless steel or black stainless trapdoor cover closes flush, preventing water intrusion and damage to the device inside. It includes a 20A receptacle, or you can install one of your own with no need to dismantle the hinge.

Arlington Industries’ FLBC5570 recessed cover kit fits 5½-in. concrete floor boxes. The thin flange and recessed devices reduce tripping caused by protruding plugs, and a divider and 4-port keystone device is supplied for a low-voltage option.

Arlington Industries’ nonmetallic hole cover kit ensures compliance with OSHA standards on multistory building sites. Now in three sizes, it is rated for a 250-lb. load. The 10½-in. diameter cover fits openings of 3¾–9¼ in. Retaining clips and a reference scale allow for precise sizing of the cover-to-hole diameter. 

FallTech’s 6814150K rescue and descent work site kit’s bidirectional design provides shuttle operation for multiple successive descending users. The rope lifeline has lightweight aluminum alloy connectors. The integral triple-mode lifting capability has a handwheel, ratcheting handle and power drill adapter. The maximum descent load is 440 lbs. for two users.

Buckingham’s A94089AQ10 BuckAlloy pole climber kit features hook-and-loop cushion wrap pads and a bungee gaff guard. The cushion wrap pads are designed to be easy to put on, take off and adjust and have an insert for climbers. The gaff guard has a bungee strap that attaches to the climber sleeve loop or the top of the pad to hold the coated wire gaff guard in place.

Buckingham’s BuckEscape 302AFKIT-65 kit is an after-fall self-rescue system. The energy-absorbing lanyard enables a worker to perform a self-rescue from a disabled aerial bucket, or if the worker is ejected from the bucket and is suspended from their lanyard. Built-in suspension trauma steps are designed to alleviate pressure during the self-rescue process.

Arlington Industries’ FLBR5420AB recessed floor box kit features two low-voltage openings with a built-in driver, an ultra-thin stamped steel flange and flush-to-the-floor in-use and blank covers. It installs with a hole saw in existing floors. Four mounting wing screws attach the 24½-in3 box securely to the floor.

TayMac’s weatherproof electrical outlet kit includes a 15A GCFI receptacle, metal electrical box and deck outlet cover. Power can be placed so people can avoid long extension cords. The cover is constructed of PVC and a wide-opening lid covers a 23/4-in. recessed space to accommodate larger cords and plugs. For protection while in use, the cover has a rain chamber and “drip loop” design with wide drip holes.

Arlington Industries’ two-gang, steel, floor box kits give installers a low-cost way to install a receptacle and two low-voltage openings in a new or existing floor. The combination boxes with an installed divider have brass- or nickel-plated metal covers with flip lids that deliver flush-to-the-floor installation. The gasketed covers also hide miscut flooring.

Greenlee's shearing station kit is hydraulically powered. It shears each piece of rod and strut to a precise length and features a movable arm and measuring stop. User can easily swap out dies with no tools or loose parts. The retaining spring arm brings back dies into the starting position for next cut. 

Arlington Industries’ FLB6230MBLR cover kit allows for flush receptacle installation and is designed for placement on a concrete floor box. It has flip lids and includes a 6-in. brass cover, gasket, receptacle and a leveling ring. It fits most 41/2-in. concrete boxes.  

Greenlee’s shearing station kit is hydraulically powered. It shears each piece of rod and strut to a precise length and features a movable arm and measuring stop. Users can easily swap out dies with no tools or loose parts. The retaining spring arm brings back dies into the starting position for next cut.

Arlington Industries’ listed FLBC4580 IN BOX Cover Kits install receptacles, flush, in a 4¹/₂-in. concrete floor box. The brass-plated or nickel-plated metal covers have ultra-thin, stamped steel flanges that deliver flush-to-the-floor receptacle installations. Recessed covers install into the box, reducing trip hazards caused by plugs. Easy to install, they come with a divider for power and low-voltage in the same box.

Arlington Industries’ FLBC4580 in-box cover kit fits receptacles installed in a 4¹/₂–in. concrete floor box. The brass or nickel-plated metal covers have thin, stamped steel flanges that deliver flush-to-the-floor receptacle installations. The recessed covers install into the box, reducing trip hazards caused by plugs. They come with a divider for power and low-voltage in the same box.

Platinum Tools’ EXO termination kit is an all-purpose category cable termination kit. It includes an EXO crimp frame with EXO-EX and EZ-RJ45 interchangeable dies, Cyclops 2 cable jacket stripper, electrician’s scissors and 5-in. side cutting pliers. Also included are 125 connectors of various sizes.

Sticklers’ fiber optic inspection and cleaning kit includes a CleanClicker fiber optic connector cleaner, fiber optic splice and connector cleaning fluid, clean wipes, Cleanstixx connector cleaning sticks and the VIAVI FiberChek Probe Microscope handheld scope. It is contained in a watertight, airtight carrying case.

Platinum Tools’ EZ-RJ45 90185 cut/strip/terminate kit gives users all the tools to prep and terminate Cat 5e, Cat 6 and Cat 6a cables. It features the EXO Crimp Frame with the EXO-EX and EZ-RJ45 interchangeable dies. It also includes a Cyclops two-cable jacket stripper, electrician’s scissors, 5-in. side-cutting pliers and a collection of connectors.

Cementex’s TR-9ELK-ZC nine-piece electrician’s service tool kit features double-insulated safety hand tools in a zippered case. It includes a 9-in. pair of linesmen’s pliers, a 7¹/₂-in. pair of diagonal cutting pliers, a 7-in. pair of needle nose pliers, a 9-in. combination stripper and crimper, ³/₁₆-in. slotted screwdrivers in 4¹/₂-in. and 6-in. lengths, a ¹/₄-in.-by-6-in. slotted screwdriver, a 3-in. No. 1 Phillips screwdriver and a 4-in. No. 2 Phillips screwdriver.

Platinum Tools’ Xpress Jack termination kit is designed for terminating keystone jacks. It includes a Cat 5/6 cable jacket stripper and Scissor-Run electrician’s scissors for prepping cable and the Xpress Jack punchdown tool for terminating. It also includes 20 Keystone Cat 6, 110 jacks (10 blue and 10 white) and a hanging tool pouch.

Sticklers’ fiber-to-the antenna cleaning kit contains fiber optic cleaning fluid, a box of fiber optic cleaning swabs, a Cassette CleanClicker Wheel, Clean Wipes optical wipes and more. The cleaning fluid is nonflammable, nontoxic and globally GHS-compliant and packaged in a hermetically sealed container so the kit can be shipped anywhere in the world.

Flir’s M200 aerial thermal imaging kit is designed for inspectors and first responders. It comes with imagers, batteries, controllers and displays. It combines the flight stability, gimbal technology, mobile app integration, and image transmission of the DJI M200 drone with the thermal imaging technology of Flir. Users can see differences in heat to detect lost people and animals, moisture intrusion in buildings, roof damage and more.

Arlington’s FLBT6520 round, plastic countertop box kits offer multiple options for installing a receptacle in a countertop up to 1¹/₂ in. thick. It comes with gasketed brass or nickel-plated trapdoor covers. It is installed by tightening two screws that hold the spring steel clip secure against the underside of the countertop

Arlington Industries’ FLBC8500 interlocking, nonmetallic, gangable floor box kits are designed for new concrete. They have connections on opposing sides so they can be locked together to create a two- or three-gang box that accommodates a brass or nickel-plated brass gasketed cover. Covers can be installed with the hinge on either side.

Arlington Industries’ FLBC6230MBLR cover kit is designed for installing receptacles flush in concrete floor boxes. It fits FLBC4500 and FLBC4502 boxes and other manufacturers’ 4¹/₂-in. concrete boxes. It has flip lids and includes a 6-in. brass cover, gaskets, receptacle and a leveling ring.

Arlington Industries’ steel FLBT4400 series countertop box kits are available with UL-listed tamper- and weather-resistant, decorator-style GFCI, tamper-resistant receptacle, or a combination with receptacle and two USB ports. It comes with gasketed, stainless steel or black trapdoor covers that close flush with the countertop for ingress protection and preventing damage to the devices in the box.

Arlington Industries’ Drop-in floor box kit is designed for a quick, flush installation using a single hole saw. Its brass or nickel-plated metal covers with gasketed lids sit into a 0.04-in.-thick plated steel flange that sits flush with the floor to prevent trip hazard. Oversized carpet rings for hiding cut ends of carpet sold separately.

Arlington Industries' FLBC4502 4.5-in. nonmetallic concrete floor box has six conduit hubs and four plugs. The reversible FLBC4502LR leveling ring can install any 6-in. cover on any 4¹/₂-in. concrete box. Side A fits any 6-in. round cover with a 3¹/₂-in. screw hole pattern. Side B has a second set of holes that fit 6-in. covers with a 3³/₈-in. screw hole pattern.

Arlington Industries’ recessed in box cover kit installs into Arlington’s FLBC4500 nonmetallic concrete box. It is recessed and installs into the can, reducing trip hazards caused by plugs sticking out of the box. It also allows for power and low-voltage in the same box. It is available with metal and plastic flanges.

Arlington Industries’ drop-in floor box kit can be installed quickly with a single hole saw. It is available with brass or nickel-plated metal covers with gasketed flip lids to keep water out. The 0.04-in.-thick plated steel flange sits flush with the floor to prevent trip hazards. It is cULus Listed.


Arlington Industries’ drop-in, flush-to-floor box kit is available with brass- or nickel-plated metal covers with gasketed lids and 0.04-in.-thick plated steel flanges. 


Arlington Industries’ UL-listed steel floor box kit features single- and two-gang steel boxes with metal covers that create a flush-to-the-floor receptacle. The gasketed brass or nickel-plated brass covers fit Arlington brand and other manufacturer’s boxes, prevent water intrusion and include flip lids or threaded plugs that protect the box when not in use. 


Emerson’s SRMP power-end termination kit joins cables inside a power-connection box and eliminates the need for a heating gun and shrink tubing. Instead, it uses quick-setting silicone adhesive, which can be cold applied, and slip-on boot connectors. It is made of molded silicone material and can be used for indoor or outdoor applications. Each kit can make five complete connections.


Arlington Industries’ recessed in-box cover kit is designed to install a receptacle in Arlington’s FLBC4500 concrete floor box. It is recessed and installs into the can to reduce the trip hazards caused by plugs sticking out of boxes. It allows for power and low-voltage cable to be installed in the same box. It is available with metal flanges in brass or nickel and plastic in light almond, gray, caramel, black and brown.


Arlington Industries’ drop-in floor box kits install nearly flush in existing floors. Designed for a neat installation, these floor boxes install with a single hole saw cut. They accommodate most 3¹/₂-in. standard covers and Arlington’s round low-profile covers, which sit ¹/₈ in. off the floor and seat into a nonmetallic ring to reduce trip hazards. 


Arlington’s FLBT4400 series countertop box kit comes with an installed UL-listed, decorator-style GFCI or TR receptacle or a combo with a receptacle and two USB ports. The gasketed trapdoor cover has a stainless steel finish and closes nearly flush with the countertop, preventing water intrusion and damage to devices. The spring clip holds box the securely against the surface. It fits granite or other countertops up to 1¹/₂ in. thick. 


Arlington's UL-listed adjustable floor boxes are the low-cost way to install a receptacle in the floor. For new or retrofit work, they fit varying floor heights up to 2 in. Round and rectangular gasketed covers prevent water intrusion. Threaded plugs or flip lids protect the box. Non-metallic covers come in five colors; metal covers come in brass or nickel-plated. Click here for more information.

Arlington Industries’ FLBCF101LA floor box kit comes with a rectangular, light almond cover with two flip lids. It is designed for new concrete pours and includes spacers for adjusting the box to the finished floor height. Additional nonmetallic and metallic covers, and threaded plug options are available. 

Arlington’s UL-listed, steel floor box kit includes a two-gang steel box, assorted gaskets and two receptacles—one power and one low-voltage or two power receptacles. It comes with round brass or nickel-plated brass covers with four flip lids to prevent water from entering the box. It installs flush in new or existing floors. 


Arlington Industries’ FLBT4400 countertop box kit has a stainless-steel finish and gasketed trapdoor cover that closes nearly flush with the countertop, preventing water intrusion and damage to the devices in the box. The spring clip holds the box securely against the surface. The box fits granite or other countertop material up to 11/2-in. thick. 


MicroCare Corp.’s Sticklers fiber optic cleaning kit for field installers includes 11/4-mm and 21/2-mm Cleanclicker 750 push-to-clean end-face cleaning tools; cleaning fluid; five sleeves of Cleanstixx bulkhead cleaning sticks; lint-free, optical-grade CleanWipes 400 and CleanWipes 90 fiber optic cleaning wipes; and a high-intensity, heavy-duty LED inspection flashlight in a 9-in.-by-5-in.-by-5-in. padded zipper tote. A military version is available with a low-visibility black poly bag with slightly different contents to accommodate military-style connectors.