Barron Lighting Group’s MODR4 Series recessed LED retrofit downlight features an integrated LED power supply and thermal management system. It can fit into most standard 4-in. recessed housings and can be used in retrofits, remodels and new construction projects. It can operate in temperatures between –4°F and 113°F.

RAB Lighting’s Lightcloud RGBW retrofit downlight is designed to manage lighting wirelessly without the need for a gateway or hub. Choose from more than 16 million colors. Tunable white is available between 2,200K and 6,500K. It is dimmable down to 5% and wet-rated for indoor or outdoor locations. 

Halco Lighting Technologies’ 120V ProLED color selectable downlight is listed for wet locations. It is made of steel housing with a white trim. It can be used in new construction or retrofit residential applications. It is color selectable in 2,700K, 3,000K, 3,500K, 4,000K and 5,000K options and has an average life of 50,000 hours.

Barron Lighting Group’s 120V DDX series surface mount LED downlight provides project flexibility with field-selectable color temperature: 2,700K, 3,000K, 3,500K, 4,000K and 5,000K CCT. It offers 960 lumens and includes a snap-on mounting bracket for installation directly to a junction box. 

RAB Lighting’s LED, dimmable daisy-chained, canless, field-adjustable wafer downlight is controlled with one driver. It is available in 4-in. or 6-in. wafers, and users can add more wafers. It can be used in residential and commercial applications inside or out. It features five field-selectable color temperatures.

Lutron’s Finire Prime downlight by Ivalo is an adjustable, fixed and wall wash value centric round or square LED. It has warm dimming of 2,700K or 3,000K down to 1,800K or 2,700K and 3,000K LED color temperatures. It comes in 30- and 65-degree beam angle options. It tilts up to 25 degrees.

Liteline’s 6-in. shade mini is a 13W round downlight for retrofit applications into existing 6-in. recessed housings or octagon box. It can be used in wet locations, and the durable airtight aluminum body has a twist-and-lock, two-tone, dead front trim/baffle.

Leviton’s 8-in. LED downlight with motion sensor features an automatic on/off occupancy sensor—no wall switch is required. It is available in 3,000K, 4,000K and 5,000K adjustable nondimming color temperatures. It is suitable for damp locations. 

Intense Lighting’s MX downlighting with a new tunable white solution provides illumination at 90 CRI with a color range of 2,700K–6,500K. Die-cast trims are available in a variety of standard finishes and can be configurable in round, square, trim and trimless options.

Signify’s Calculite LED downlight features 120V, 277V and 347V inputs. The single-frame solution is adaptable and was designed to respond to changing project needs.

ConTech Lighting’s 6-in. StopAire non-IC recessed downlight delivers up to 1,600 lumens. It requires minimum 3-in. clearance around fixture from insulation material. Thermal protection is provided in case of improper insulation use. The light engine consists of a single, high-output multichip LED array for precise optical control.

Lighting Science’s Glimpse Advantage downlight produces more than 90 CRI and is dimmable from 10–100 percent. It can be ordered with different color rings, is wet-rated and comes in three color temperatures: 2,700K, 3,000K and 4,000K. 


Eaton’s Halo ML4 LED downlighting system includes housing, a 900-lumen LED module and a choice of round or square field-interchangeable, 2-in. aperture, pinhole trim. The trims are available in open, lens and lens-wall-wash styles in 25-, 40- or 55-degree wide-flood distributions.