Leviton’s 8-in. LED downlight with motion sensor features an automatic on/off occupancy sensor—no wall switch is required. It is available in 3,000K, 4,000K and 5,000K adjustable nondimming color temperatures. It is suitable for damp locations. 

LEDvance’s RT screw-base, dual-selectability downlight features 5 light color and 6 lumen options. It is phase-cut dimmable and designed for retrofit applications such as bedrooms, kitchens and more using 4-, 5- or 6-in. housings. Baffle and smooth reflector types are available.

EarthTronics’ color- and wattage-selectable LED commercial downlight can be used in new construction or renovations/retrofits. Users can select the color options from 3,000K, 3,500K and 4,000K. The corrosion-resistant, stainless-steel spring clips accommodate up to 2-in.-thick ceilings. It can be installed in wet locations.

SLG Lighting’s DE G1 commercial downlight can be used in new construction or retrofits. It features two light engines, four trim sizes and switches that are CCT-selectable and lumen/power-adjustable. Innovative lens, diffuser and reflector provide uniform illumination.

Intense Lighting’s MX downlighting with a new tunable white solution provides illumination at 90 CRI with a color range of 2,700K–6,500K. Die-cast trims are available in a variety of standard finishes and can be configurable in round, square, trim and trimless options.

Signify’s Calculite LED downlight features 120V, 277V and 347V inputs. The single-frame solution is adaptable and was designed to respond to changing project needs.

ConTech Lighting’s 6-in. StopAire non-IC recessed downlight delivers up to 1,600 lumens. It requires minimum 3-in. clearance around fixture from insulation material. Thermal protection is provided in case of improper insulation use. The light engine consists of a single, high-output multichip LED array for precise optical control.

Lighting Science’s Glimpse Advantage downlight produces more than 90 CRI and is dimmable from 10–100 percent. It can be ordered with different color rings, is wet-rated and comes in three color temperatures: 2,700K, 3,000K and 4,000K. 


Eaton’s Halo ML4 LED downlighting system includes housing, a 900-lumen LED module and a choice of round or square field-interchangeable, 2-in. aperture, pinhole trim. The trims are available in open, lens and lens-wall-wash styles in 25-, 40- or 55-degree wide-flood distributions.