Brass Knuckle’s Luna BKFIX-3001 ANSI-rated glasses have a wraparound one-piece lens that hugs the face. There is antifog protection and abrasion, chemical and UV resistance. A molded nose piece and halo temple provide a secure fit.

Klein Tools’ AESBH1 Bluetooth behind-the-head earmuffs can be worn comfortably with hard hats and caps. Earmuff cups pivot to rest around the neck when not in use. The angled soft foam cushion offers an acoustic seal and has a rechargeable 750-mAh battery to last more than 70 hours on a single charge.

FallTech’s 5318A10 15-lb. tool tether has a choke-on design suited for tools with existing captive eye holes. It features an elastic choke-loop with nylon cord lock for a more secure attachment. The steel D-ring provides a secure connection point for tool tethers. The webbing is made of polyester.

Petzl’s Duo RL rechargeable multibeam headlamp provides 2,800-lumen brightness. A sensor analyzes the ambient light and automatically adjusts brightness. Manual operation is minimized and burn time is optimized. The aluminum lamp body provides impact resistance. It is waterproof and can be used in wet environments.

Buckingham Manufacturing’s 39021J12-2 lightweight suspension sling is designed to be used as a personal anchor for human support. Steel rings allow any type of connector to be hooked to it. It comes with a wear protector for wrapping around sharp objects, which increases the life of the sling. 

Carhartt’s FT6002-W women’s Ironwood work boots have a waterproof membrane that keeps out rain and mud but allows heat and sweat to escape. The slip-resistant outsole meets ASTM F3445-21 SR standards to help protect against slips, trips and falls.

SeeHerWork’s SHW-G02-XS women’s impact work gloves have knuckle and finger protection pads along the back of the hand for additional protection and dryness. There are touchscreen fingertips and a terrycloth thumb pad to wipe away sweat. A synthetic leather second layer in the palm and thumb crotch offers extra padding and protection.

MSA Safety’s V-FIT safety harness has shoulder padding that responds to the user’s movements to conform to the body, eliminating pressure points. A dedicated attachment point for personal fall limiters allows for quick attachment and keeps the back D-ring free for other use. There are four lanyard keepers, including two at the waist, to increase comfort by keeping lanyards away from underarms.

Portwest’s FR404 Bizflame 88/12 Flex FR pants offer protection against the thermal hazard of an electric arc. They are finished using garment wash and offer protection against radiant, convective and contact heat. There is an adjustable hem to accommodate all leg lengths. There are six pockets for storage.

Gateway Safety’s Parallax safety glasses have a dual-component temple design that creates cushioned comfort. The integrated brow guard provides top protection from debris. It has a lightweight construction and a soft, rubber nose piece. A large one-piece lens provides coverage, including side impact protection.

Bolle Safety’s SWIFTN10U glasses have an antiscratch and antifog coating. The textured temples ensure lateral protection, fit and retention. They are made of 31% recycled polycarbonate and are completely recyclable, with a monomaterial design that doesn’t have any metal components.

Brady Corp.’s lockout/tagout kit is specially designed for electrical lockout scenarios, including nonconductive nylon-body padlocks. Each lock and key are unique, allowing authorized users to have individual locks and comply with OSHA’s “one person, one lock, one key” guidance. 

Brass Knuckle’s BKKN200 knee pads have a hard, contoured polyethylene cap that conforms to the shape of the knee cap to enhance the patella’s stability and reduce risks of impact and injury. The abrasion-resistant cap allows for safer pivoting and heavy-duty work on the knees. There is an adjustable strap to keep the pad where it should be. 

Studson’s SHK-1 sun brim is designed to slide on and off of the helmet shell to provide additional sun protection. It protects users’ necks from harmful UV rays (50+). It is made of a lightweight material to keep wearers cool. It is designed to attach to helmets and is easy to clean. 

Petzl’s Absorbica-Y80 double lanyard has a compact energy absorber that is designed for progression on a vertical structure or a horizontal lifeline and when passing intermediate anchors. It has several connection options and can be used with different types of connectors.

Carhartt’s 104464 Yukon Extremes coverall is wind-resistant, water-repellent and insulated. It is made from durable Cordura nylon with ankle-to-thigh zips, a double layer for knee pads and reflective details. It includes secure and drop-in pockets for tools.

Ergodyne’s ProFlex 850 insulated freezer gloves are recommended for temperatures between –5°F and –20°F. They have silicone patterned palms and fingers for a secure grip, and users can swipe and type on smartphones with the thumb, index and middle fingers with the gloves still on.

FallTech’s 72907SPD 17-ft. Arc Flash MiniPro self-retracting lifeline features a 9-kV rated dielectric overmolded snap hook. It is suitable for below D-ring tie-off up to 5 ft. when no edge hazards exist.

Lapco FR’s coverall is made from flame-resistant fabric that is a high-performance blend of 88% cotton and 12% nylon to keeps users cool and comfortable. The adjustable elastic-back waist provides maximum extension and flexibility. Two chest patch pockets have flap closures to ensure belongings remain safe, along with two hip pockets—each with a pass-through—to keep hands free.

Klein Tools’ 60477 face shield is designed with lightweight materials and proper balance to reduce neck fatigue.
It has antifog, UV and durable scratch-resistant coatings for use in a variety of demanding environments.

Dicke Safety Products’ VFR3500 fire-resistant safety vest meets ASTM F1506 arc test 4.6 cal/cm². It features 2-in., flame-resistant, retroreflective stripes. It is made of modacrylic mesh fabric for lightweight breathability, and features a flame-resistant hook-and-loop front closure.

DeWalt’s DPG660-D dielectric cap-mounted earmuffs feature a metal-free construction for use around electrical hazards. The NRR 25-dB rating offers protection in moderate- to high-noise environments, and it has extendable and foldable arms for an adjustable fit.

Magid’s M01 Class 0 rubber electrical insulating gloves feature ultra-thin rear labels that are flush with the back of the electrical insulated gloves, improving longevity and comfort while imparting important information critical to safety applications. The flexible design makes working with small parts easy. 

Werner’s R433006LE 6-ft. self-retracting lifeline is a Class 2 device. It has a thermoplastic housing and an ultra-lightweight and compact backpack-style energy absorber. When attached overhead, it has a 24-in. maximum arrest distance that is designed for low-clearance applications. 

Portwest’s PW67 hard hat is unvented, and the shell is safe in electrical applications. It has a 4-point textile suspension harness and wheel ratchet for size adjustment. It meets the ANSI/ISEA Z89.1 Type I, Class E standard.

Brass Knuckle’s BKDST-1010PN Pink Grasshopper safety glasses have a soft EVA foam dust filter with built-in air channels that fill the gap between the glasses and face, keeping dust out. Clear lenses allow maximum light transmission without changing or distorting vision or colors.

MSA Safety’s 10160925 V-Gard green full-brim hard hat is made with renewable green high-density polyethylene, a biopolymer made from sugarcane-based ethanol. It is slotted and can be recycled.

Milwaukee Tool’s ANSI/ISEA 105-2016 cut level 4, nitrile-dipped gloves are made of an 18-gauge knit for mobility. A reinforced nitrile coating between the thumb and index finger provides durability in high-wear points. They feature a color-coded wristband and back-of-hand logo for easy cut-level identification.

Y-pers’ Boss waterproof soft-shell yellow jacket has reflective striping, two lower pockets with zippers, one check pocket and adjustable cuffs. It zips closed and is designed for users working in environments such as roadway construction and utilities.

MSA Safety’s Evotech arc flash harness is made of 100% Kevlar webbing that is fire-resistant and self-extinguishing. Reflective shoulder padding provides visibility in low-light applications. The horizontal leg straps stay in place for mobility and comfort and nonbinding edge shoulder padding prevents neck chafing.

Gateway Safety’s Serpent full-brim safety helmet offers durable impact protection and all-around sun protection. The eight-point, six-strap nylon suspension is comfortable and provides impact-absorption. The rotating ratchet adjustment system provides a custom fit.

Ariat’s Stump Jumper BOA 6-inch waterproof composite-toe work boot has an oil- and slip-resistant sole for wear resistance. It has outdoor traction lugs with debris-releasing tread and protective guards on the toe and heel. It features a removable antifatigue insole for comfort. 

Studson’s SHK-1 full face mesh shield mounts to a helmet for secure articulation into the up or down position with the fixed mechanism. It complies with ANSI/ISEA Z87.1-2020 for impact-resistance. It is designed to comfortably fit over safety glasses. 

Ergodyne’s ProFlex 550 knee pad has a low-profile spandex sleeve with breathable mesh paneling to fit comfortably under work pants for flexible, bulk-free knee protection. It is made of impact-absorbing PU foam.

Buckingham Manufacturing’s Buck Adjuster lanyard can be used for positioning, suspension and rescue. The twisted eye length-adjusting device enables users to properly orient it on the user’s body belt. It is constructed with an energy-absorbing nylon core, red braided polyester inner core cover and an abrasion- and heat-resistant outer jacket that eliminates the need for a wear guard. 

Carhartt’s 103193 knee pads insert in users’ double­-front work pants, and the pads can go through at least 50 home wash and dry cycles without wearing out. They are compatible with men’s and select women’s double-front pants and bibs. 

Klein Tools’ 60512 full-brim hard hat has a 6-point suspension for stability and balance. Users can adjust it with one hand using a large knob ratchet mechanism, even with gloves on, and a soft neck pad pivots to clear bandana knots and ponytails. Large adjustable vents can be opened and closed to manage air circulation.

Gateway Safety’s Venom face shield is a contoured visor designed to create a complete seal to block debris. The three-part custom adjustment system makes it easy to wear. It features a soft brow pad and nape strap for comfort. The rotating ratchet adjustment easily slides over the nape of the neck for a secure fit.

Buckingham Manufacturing’s Buck Articulator di-electric Y-style harness can be used when the user needs to bend, reach, twist and climb at heights. The harness can be used by itself or can attach to a lineman’s body belt. The color-coded leg straps with quick-connect buckles make donning easy.

MSA Safety’s Feather Fit safety glasses are made of polycarbonate lenses that stand up to UV radiation, impact and dust particles. They have an antiscratch coating, a rubber flange nosepiece and side-impact protection.

Youngstown Gloves’ 08-3085-80 gloves are warm, waterproof, cut- and puncture-resistant. The outer shell is a form-fit performance work glove lined throughout with Kevlar. The middle layer is a waterproof, windproof and breathable membrane designed to keep hands dry. The innermost layer against the hand is a warm and soft microfleece liner.

FallTech’s 5050 ANSI class 2 high-visibility safety vest is designed for integration with full body harnesses or detached standalone use. The design improves the user’s access to the belt buckle and pants pockets. It features internal donning fasteners and loops for attaching to harness straps, two rear pockets and zippered front pouch pocket.

MSA Safety’s 10176307 Latchways personal rescue device is a lightweight, full-body harness system for self-rescue. The 65-foot-long descent line is made from Aramid rope. An arc-flash model is also available.

Gateway Safety’s Metro safety glasses are available in five versatile frame colors to meet the style preferences of men or women. The full-frame spectacles weigh less than 1 oz. It has a soft rubber nose piece to prevent slipping and contoured temples for comfortable fit.

Ariat International’s FR Polartec balaclava is a protective head covering that shields the head and lower portion of the face and neck. It is Cat 2 rated for dual-hazard flame-resistant workwear to help protect against flash fire and electrical arcs. It is rated to protect against second-degree burns when exposed to an electrical arc. 

Studson’s SHK-1 half shield is designed to tuck under the brim of a helmet with an attachment mechanism that easily moves over the brim and snaps back into place. It can fit over prescription glasses, and it features an antiscratch coating and antifog treatment for clear sight.

Superior Glove’s Contender KAW1C10 arm sleeve provides ANSI Level A2 cut protection. The heat-resistant construction offers strong resistance to sparks, flames and heat, while a snug fit follows the natural contours of the arm for comfort.

Milwaukee Tool’s 48-73-1364 Bolt front-brim safety helmet with liner has a padded suspension that includes an adjustable swinging ratchet. The chin strap has five adjustable buckles for security. It comes in an unvented model for electrical safety. 

Studson’s SHK-1 neck shade is designed to easily clip on and off the rear of the helmet shell to provide instant sun protection. It protects users’ necks from harmful UV rays (SPF 50+), dust and debris. It is made of lightweight material to keep the wearer cool. 

MSA Safety’s V-Shock personal fall limiter features easy-to-understand housing color, dashboard labels and iconography to help make PPE selection on the job site quick. It is available in multiple lengths and snaphook configurations for a variety of applications.

Buckingham Manufacturing’s Bucktop U6270 chest harness is equipped with a suspender setup option. It can be used in conjunction with a saddle as suspenders or can be used as a standalone SRT chest harness.

Irish Setter’s Kasota women’s work boots meet ASTM safety standards for electrical hazards and have a moisture-management lining with waterproof components. Soles are heat-resistant to melting at a minimum of 475ºF. The comfort tongue technology was designed to minimize pressure on the shin from the top of the boot tongue.

Uline’s S-11885 deluxe knee pads feature a soft, form-fitting shell for all-day use. The nonskid construction won’t scuff or scratch floors and has hook and loop neoprene straps. It is made of polyester, jersey and neoprene fabric with gel-injected EVA foam padding.

Ariat’s Groundbreaker 6-in. work boot features a removable all-day cushioning insole. The duratread sole is durable to resist oil and slips. It is made with full-grain leather and has a mesh lining. It meets ASTM standards for electrical hazard resistant footwear. 

FallTech’s 5027B 15-lb. tool tether has a tubular web with full-length internal elastic cord provided. It features an elastic choke-loop with nylon cord lock for secure attachment, and includes a self-closing steel carabiner. 

Y-pers’ Bisley women’s short-sleeve shirt is made from a cotton/poly blend that is durable, lightweight and performance-wicking. It is designed for low-risk activities where ANSI compliance is not required. An antimicrobial treatment prevents growth of bacteria, mold and viruses. It has a UPF rating of 50+.

Superior Gloves’ balaclava is made with a double layer Kermel-viscose blend, protecting against fire hazards. The fabric is soft and nonirritating, allowing for comfortable all-day wear.

Klein Tools’ gloves feature a touchscreen-capable fingertip fabric. There is palm padding and an abrasion-resistant palm patch for added protection, as well as a soft suede palm for durability. It features a hook-and-loop wrist strap and strong TPR pull tab for easy on and off.

Hemco’s industrial applications emergency shower decontamination booth is shipped from the factory in modular sections so it can be assembled on-site to connect to water supply and waste systems, and easily moved from one site to another. It includes a pull-rod drench shower, eye/face wash and grab bars.

Ergodyne’s Squids 3101 tool lanyard is approved to ANSI/ISEA 121-2018. The energy-absorbing cord has tubular nylon webbing, and it has a manual locking stainless steel carabiner. It has a reflective accent for higher visibility and lock stitching at both ends for extra security.

MSA Safety’s Sierra protective eyewear features side and front impact protection, while also guarding against impact hazards or flying particles, dust, sparks and glare. It offers integrated side shields, a vented brow guard, Tuff-Stuff scratch-resistant lens and adjustable temples.

Studson’s cooling helmet liner features long-lasting cooling technology, UPF-50 sun protection and chemical-free cooling. It can be machine washed and is made of polyester and spandex. Users just wet the liner with water, wring out excess water and snap to activate cooling.

Hultafors’ airflow knee pads feature layers of gel, high-density closed-cell foam and neoprene for added comfort. The airflow side panel design helps ventilate the kneepads and reduce heat build-up. There is an upper elastic strap with slip-in clip buckle fastener system for fit. It features an adjustable neoprene strap for stability.

Wrangler’s FR flame-resistant work pants are made from a blend of cotton with a touch of stretch to ensure comfort. The pants feature articulated knees for unrestricted movement, a right side hammer loop, left back tool pocket and reinforced hip pocket. There are two back pockets with no closure.

MSA Safety’s V-Guard H1 safety helmet is designed for tower climbing, forestry, rescue and confined spaces. There is a rescue whistle integrated into the chin strap buckle. It features a pivot ratchet suspension for comfort, adjustability and range of motion. It includes a noncontact foam liner for air flow, breathability, cooling and hygiene.

Studson’s Ear Defender muffs come standard with a 30 mm universal attachment that slides and clips into place on a helmet’s side rail. The noise-reduction rating is 24 decibels and meets ANSI S3.19-1974 noise-reduction standards. It is adjustable to fit over all ears. 

Hultafors’ all-terrain knee pad has layered gel, high-density closed-cell foam and neoprene padding for all-day comfort. The accordion-style cover keeps the knee pad in place without restricting movement. It has a full-size, all-terrain cap design. There is a slot-and-dot button fastener system with flexible rubber straps for adjustments.

Milwaukee Tool’s Type 2, Class C vented safety helmet provides protection from top and side impacts. There are two universal accessory slots for additional PPE and accessories. An antimicrobial sweatband and helmet liner prevent odor and bacteria buildup and are removable and machine-washable.

Studson’s Sentinel safety glasses include a polycarbonate lens for impact protection, durability and visual clarity. Hydrophobic coatings repel water, sweat and debris, and the antislip rubberized temples and nose grip keep them secure on the wearer’s face. The nylon frame is made from sustainable, plant-based plastic.

Carhartt’s 100501 high-visibility class 2 vest features triple-stitched seams for longer life. It’s made with ultra-light mesh so it works well through warm weather. There’s a utility pocket on the chest, and the reflective trim is segmented for breathability. 

FallTech’s 7084 ComforTech 6D tower climber full-body harness features shoulder yoke, sub-pelvic leg and 6-in. waist support positioning pads that have a layered blend of polyurethane and memory foam padding. It includes alloy steel D-rings, friction roller torso adjusters and tongue buckle legs.

Brass Knuckle’s SmartCut BKCR3520 gloves are flexible due to their thin, 15-gauge composite shell. This flexibility is paired with an abrasion-resistant nitrile coat and reinforced thumb crotch. Sponge-like foam nitrile channels oil away from the surface for slip resistance. A full knit wrist prevents dirt, debris and cold from getting inside. 

3M’s Peltor X4 earmuffs feature a noise-reduction rating of 25–27 dB. It has a low-profile cup design for compatibility with other PPE. The cup angles to help create a customized fit for the worker. It can be used as over-the-head hard hat attached and behind-the-hat models.

HiVis Supply’s Class 2 safety road vest is made with a 6.5-oz. FR high-breathability modacrylic blend twill and an FR fabric that will not melt, drip or ignite. It features 3M Scotchlite FR reflective tape, zipper front closure, pockets and more.

Klein Tool’s 60489 Class E, Type 1 nonvented, full-brim hard hat includes a suspension system and a flexible open frame design for fit and improved air circulation. With one hand, users can adjust the large knob ratchet mechanism, and the soft neck pad pivots to clear bandanna knots and ponytails.

Lapco Manufacturing’s flame-resistant pants are made with lightweight inherent fabric for breathability and moisture management. There are two slack-style front pockets, left and right cargo pockets on the legs and inset back uniform pockets. It has a nonconductive button and snap closures.

Studson’s SHK-1 full-brim hard hat features an adjustable rear dial system for fit. The magnetic on/off buckling system and 4-point strap enables users to adjust with a gloved hand. It crumples instantly on impact to absorb force and protect users’ skulls and brains from injury. 

Makita’s T-04276 advanced ANSI 2 impact-rated demolition gloves are abrasion-resistant. They are also touchscreen-compatible for smartphones and tablet use. They have a ribbed and padded palm for comfort and are machine washable. There is a flexible TPR hook-and-loop closure for a secure and customizable fit.

Emergent Safety Supply’s Allegro 6987 FlexKnee is ribbed across for easy flexing and comfort above the knee. The surface is grooved for nonslip stability and is constructed with inner foam rubber for greater comfort and water resistance. The rubber straps are adjustable. 

Uline’s Ansell electrical gloves are available in two colors to facilitate proper rotation between testing. They are made of 100% latex rubber. The Class 00 gloves protect up to 500V AC and are recommended for troubleshooting motors and low-voltage panels.

Wrangler’s women’s flame-resistant midrise bootcut jeans are designed to self-extinguish, reducing the risk and severity of burn injuries. The jeans feature five-pocket styling as well as two patch hip pockets, a bootcut leg opening and a safety orange ID patch on the outside for visibility. 

Milwaukee Tool’s 48-22-8297 lineman’s tool hang strap enables users to organize tools in utility truck buckets. It features a large-opening, swiveling metal carabiner to give users tool access with reduced tangling.

Bulwark’s lined bomber jacket features reflective trim with 360-degree visibility and 2-in. yellow reflective striping on the front and back. It is water-repellent and fully covered with a two-layer storm flap. There is a fully tunneled elasticized waistband and inside zipper guard.

Ariat’s Casey 6-in. composite toe work boot features multisurface traction and metatarsal guards for impact protection. There are removable cushioning insoles and durable oil- and slip-resistant Duratread soles. It meets ASTM standards for electrical hazard resistant footwear.

Ideal Industries’ Tuff-Tote tool carrier features two divided compartments with six screwdriver loops, one large center compartment, four outside pockets and eight outside tool loops. It is made of leather and has leather-wrapped grab handles for carrying comfort. The removable shoulder straps help prevent lower back strain. 

HiVis Supply’s 3100 series vest is made from a lightweight, breathable mesh material for comfort. The prismatic reflective striping offers high contrast for both daytime and nighttime visibility—even in wet or inclement weather conditions. 

Neilsen Rainwear’s Pro Arc FR/arc-rated high-visibility bib trouser is water- and windproof. It is made of quick-dry laminated outer fabric with 3M FR reflective tape. There is boot access with zippers and a storm flap, as well as adjustable suspenders, a chest pocket and two cargo pockets. 

Streamlight’s ProTac 2.0 headlamp produces 2,000 lumens. A programmable switch enables user selection of one of three different programs: high, medium and low. The protected Li-ion battery is USB rechargeable. 

WaveCel’s polycarbonate visor is impact- and heat-resistant. It is tinted green and is a wrap-around style for side protection. It has a reinforced edge, an extra-thick shield that resists cracking and a universal hole pattern to fit on hard hats. 

Lakeland Industries’ FR lightweight, moisture- wicking work shirt features dual hazard protection for arc flash and flash fire. There is a left pocket pen slot and two chest pockets with placket front button closure. The long, rounded tail keeps the shirt tucked in.

Greenlee’s 01762-07C clear safety goggles are the overwrap style to fit visitors or those who wear prescription glasses. They do not have a frame and are ANSI compliant to meet the user’s specific needs.

Cementex’s AFS-180 face shield features a molded shape to provide minimal distortion. The long length, chin cup and sides provide coverage and protection. The brow shield deflects the impact of arc blast and the translucent sides and chin provide peripheral vision. 

Lapco Manufacturing’s FR DH women’s cargo pants are made with 6.5-oz. lightweight fabric for breathability and moisture management. They are mid-rise pants with straight leg openings, and they feature nonconductive button and snap closures and cargo pockets on both legs.

Carhartt’s Force men’s long-sleeve Class 3 work shirt is made of reflective material and trim that is ANSI Class 3, Level 2 compliant. The lightweight fabric also wicks sweat and repels stains. It features a left-chest pocket and tagless neck label.

MSA Safety’s V-GardC1 hard hat features a full brim that provides additional shade and sun protection. There is a moisture-wicking sweat band with breathable foam padding, and there are optional large vents with placement to enable air flow.

Knipex’s 38-in. tool tethering lanyard includes a captive eye and self-locking gate carabiner that connects to a harness and prevents tools from falling. It is made of gathered fabric tape that expands to about 5 ft. when under strain. 

Klein Tools’ Konstruct series hard hat is built using fiber-reinforced polymer. It can withstand radiant heat up to 350ºF and has a six-point suspension for stability and balance. It has a machine-washable, breathable, padded sweat-wicking band and top pad with evaporative technology. 

Madi’s 95-HL4AA LED waterproof headlamp works with or without flash shields. There are three settings: bright, dim and off.  It offers a full view in front and no backlighting that blinds others.

Buckingham Manufacturing’s BuckStrap is a nonconductive tie-down strap designed to secure insulated blankets to energized conductors, potheads, poles and a multitude of other components. Its nonstretch and nonabsorbent properties ensure it is a safer substitute for wire ties, pilot line, electrical tape and more.

Milwaukee Tool’s winter performance gloves are designed to provide all-day warmth. They are made with a waterproof and windproof layer to help keep hands dry during the winter. The Smartswipe knuckle enables users to operate touch screens without removing gloves or having to wipe dirty fingertips across the screen.

Ariat International’s Edge LTE composite toe work boots feature static-dissipating technology for protection from static buildup on the job. They have a nonmetallic composite safety cap to protect toes against falling and heavy rolling objects.

Klein Tools’ 60502 hard hat earmuffs feature soft foam ear cushions for an acoustic seal and all-day wear. Pivot positions on the earmuff connector allow for in-use, standby and storage positions. 

Youngstown Gloves’ 12-3575-60 ground gloves have an FR liner made with soft microfleece throughout the entirety. These winterized work gloves are flame-resistant, cut- and puncture-resistant and arc rated. The palm features untreated sueded goatskin reinforcement on the fingertips, palm and knuckles for durability and protection. 

WaveCel’s T2+Pro full brim, nonvented hard hat features an accessory rail and standard earmuff slots. The low profile results in less head “bumping“ and “clipping” when working in tight spaces. It is 93% porous, allowing air to circulate freely through the dome.

Cementex’s Feature series of arc flash PPE clothing is made with Indura ultra-soft FR treated cotton. The FR hook-and-loop front closure is secure for easy access and rapid removal in the event of arc flash exposure. The calf/ankle closures allow for fit adjustment during donning and removal. 

Lapco Manufacturing’s FR balaclava hood features a double-layer cotton/spandex blend fabrication with flatlock construction, which means no bulky, itchy seams. The tailored eyehole can be worn over or under the nose for a custom fit, and the protection below the neckline keeps out the cold.

Brass Knuckle’s SmartFlex BK350 gloves seal out liquids and keep hands dry, making them less prone to skin diseases. The natural latex coating covers the full front and back of the hand, while an additional double dip of latex foam on the palm provides grip, abrasion resistance and tear resistance.

Milwaukee Tool’s cut level 3 protective sleeves have a secure tapered fit to help reduce material bunching. The moisture-wicking fabric dries fast and helps users stay cool. The sleeves are knit with 15-gauge material that is lightweight and breathable. They feature an elastic thumb loop. 

Milwaukee Tool’s Redlithium USB lightweight hard hat headlamp delivers 600 lumens of output with hybrid, spot and flood modes. It detaches from the bracket for easy charging and to help get light into hard-to-reach places. It features 180 degrees of mobility and 5 different output modes.

Buckingham Manufacturing’s 6009-64AA 6-ft. BuckLimiter retractable lanyard features a braking system designed for smooth consistent operation to prevent “jerky” lock-ups. It is resistant to moisture, abrasions, UV light and chemicals. It is made with a durable alloy housing. 

Makita Tools’ DCJ206Z2XL 18V LXT lithium‑ion cordless high-visibility heated jacket features high, medium and low heat settings. It is fluorescent yellow with silver reflective tape accents for increased visibility. It features a polyester shell for wind and water resistance.

Hilti’s CFS-MSL modular fire sleeve can be used for firestopping low-voltage cable penetrations for single and cable bundles. It is made for small- to medium-sized rectangular openings in walls, ceilings and floors and is designed for frequent cable moves and additions.

 48-71-6051 stabilizer performance knee pads feature a large flat cap for stability while working in a stationary location. The layered gel absorbs pressure and supports the knee. They are built with a hinged thigh strap for mobility. There are durable metal rivets, open cell foam and two secure adjustable buckles.

Bag Pro’s PPE Bag features two compartments, one of which is for safety shoes and has an external access. It is water-resistant and has an internal pocket for change, keys, mobile phones and more. There is an adjustable shoulder strap and hand handle.

Portwest’s UFR49 FR duck quilt-lined bib overall provides Cat 4 protection from arc flash and flash fire. It features back pockets for optimal storage, tool and utility pockets, adjustable straps for a personal fit and ankle-to-thigh zippers on the legs to accommodate work boots.

Magid Gloves’ M-Gard DXSB22BST sleeve has cut-resistant yarn infused with strength-enhancing microparticles, which eliminates the need for steel or fiberglass cores to achieve higher levels of cut protection. High-visibility color enhances protection and ensures worker compliance. 

Salisbury’s ASTM Dielectric Footwear two-buckle overshoe has a deep heel cavity designed to lock onto ladder rungs and poles. It is waterproof and made from premium-grade, ozone-resistant rubber. The fabric liner makes it easy to get on and off, and the sole has a nonskid bar tread outsole.