Jameson’s Spool Mule has a heavy-duty steel frame designed to hold common spool sizes for FTTH flat-drop and microduct, up to a 36-in. diameter. It’s collapsible, and the 27-in. axle enables simultaneous use of multiple spools. Users can load or unload the fiber midspan.

Connectrac’s Flex raceway system is a modular floor-based power and data distribution system. It can be started at nearly any point along a concrete floor, eliminating the need to feed power and data from a nearby wall. It is designed for open spaces with few walls. The poke-through and entrance fitting provides a low-profile transition that fits in new build or retrofit 4-in. core-drilled openings.

Atkore’s I-Beam welded aluminum ladder tray is lightweight and resistant to corrosion. The rung design enables cables to be tied down or to exit the tray where necessary. The design promotes ventilation and prevents the accumulation of dust, debris and moisture.

HellermannTyton’s 8.3-in. low-profile cable tie has a compact, contoured head to fit into tight spaces and protect adjacent bundles. Outside serrations minimize damage to cable insulation, which makes it designed for high-vibration applications. The bent tail allows for easy insertion.

Snake Tray’s solar cable management system has an open architectural design that allows cables to be securely managed while allowing for proper airflow so cables can operate at full capacity. It is waterproof and hand bendable, and carries DC circuitry from solar panels to their terminations.

HellermannTyton’s D20L4 screw-mount cable clip is designed for fixing pipes, cables and hoses. The elastic locking system ensures fixing and at the same time, easy removal of the fixed elements by pressing the lower latch down and pulling the fixed element.

Southwire’s BR10SMP0-C 10-in. UV black cable tie has a stainless-steel pawl that provides a secure and reliable self-locking mechanism. It can safely secure wire bundles and harness components and can be used indoors or out.

ABB Installation Products’ EcoGuard PA6 cable protection system is made from recycled fishing nets. It supports circularity goals and performance requirements in machine building, renewable energy, telecommunications and infrastructure applications.

iToolco’s MDFC10 microduct fiber cart is designed for easy delivery and payout of microduct and fiber optic cables. It holds up to 10 spools with a diameter of 24 in. and a width of 20 in. It features outriggers designed to keep the cart in place during pulling operations and transportation.

Legrand’s 943215 Cablofil wire-mesh tray adapts to complex configurations, and its structure gives maximum strength for minimum weight. It is 4 in. wide. Universal accessories enable freedom in routing and fast installation.

Snake Tray’s 787 series Conveyor is a hand-bendable cable tray specifically for attachment to conveyor belt systems used in distribution centers and warehouses. The spine is made of 0.25-in. recycled steel, and it has a lobster-trap design for cable loading, changes and additions.

Jameson’s SHV-24-KIT Aerial Buddy sheave is designed to protect ADSS cable and other jacketed fiber during installation. It can be used with jacketed cables 2 in. or less in diameter and loads up to 1,600 lbs. It’s made with lightweight, reinforced polymer that weighs less than aluminum and steel models.

MagDaddy’s BRM4T125 1¼-in. magnetic bridle ring has a magnet rated at 90 lbs. of pull strength. It can be used in permanent or temporary installations. It can be reused and repositioned on steel beams, ceiling decks, screw heads and more.

HellermannTyton’s EL-TY extended-length tie provides a high-tensile strength strapping system consisting of a continuous strap and separate locking head for any bundle diameter, which eliminates waste. The smooth strap and specially designed heads provide a strong grip on cables without causing damage during vibration.

ABB’s QuickTurn basket tray has factory-made straights and fittings that make installation and cable running easier. It can be installed with one tool, and there is no need for cutting, which eliminates waste. The integrated grounding loops ensure that proper grounding connections are made every time.

Chalfant GR-Magic cable tray is a self-connecting wire mesh tray solution. It is available in 1-, 2- and 4-in. side heights. Users can create bends, falls, rises and intersections with ease. The self-connecting ends enable installers to connect tray lengths in a single snap.

Lowell Manufacturing’s CL-12VT 12-in.-wide vertical-turn cable ladder can be used as either an inside or outside bend, attaching to a straight ladder to continue proper cable bend while changing elevation or direction. It conforms to minimum cable bend radius requirements. 

FSR’s Smart-Way floor raceway enables users to run cables down walls. It is designed for offices, conference rooms and anywhere wire management is needed with access to power and data. The compartments provide ample space for power, communication and A/V requirements.

Winnie Industries’ WJH12ACMAG ¾-in. J-hook is made of pregalvanized steel and has a bendable tab for securing wires. There is a 100-lb. heavy-duty magnet and it can be rotated 360 degrees. It can stick through oil, grease and dirty areas.

MagDaddy’s 62450 ½-in. magnetic cable clamp has a minimum strength of 15 lbs. No drilling or welding is required for installation, and it can rotate 360 degrees. It can be used on beams, ceiling decks, C-screw heads and more. It can be reused and repositioned as needs change.

Lowell Manufacturing’s CMC series cable management panel feature flexible rotating clips to organize cables. Optional D-rings on ends can support vertical cable runs. It is 19 in. wide and is made of 16-gauge steel. The rows of plastic flex-clips rotate individually. 

Mag Daddy’s magnetic J-hook is rated at 17 lbs. The magnet is rated at 90 lbs. pull strength. It can be reused and repositioned. It can support all types of datacomm and low-voltage cables, such as CAT 5, CAT 5e, CAT6, CAT 6a, fiber optic and innerduct. 

Lind Equipment’s heavy-duty NEMA 4X cord reel is designed for outdoor tough workplaces exposed to the elements or indoor applications where hose-down or other water exposure regularly occurs. The adjustable cable guide arm has 12 positions. It has an adjustable ball stop and a strong ratchet that can be disengaged for constant tension.

Snake Tray’s new Snake Max cable tray for data centers and A.I. infrastructure features prefabricated turns, tees, intersections and vertical elevation components for quick installations. Cable separators enable the cables to operate cooler for more energy efficiency. 

nVent’s K12 clip supports conduit to rod, wire or flange, and it can also be used for flexible metallic tubing, armored cable, portable cables, control tubes and communications cable. It is available for EMT, rigid, ENT, IMT, MC/AC and aluminum conduit.

ABB’s Ty-Rap high-performance cable tie is flame retardant and is designed for use in locations where low flammability and smoke are needed such as public transport, tunnels and more. It can be used in temperatures between –4°F and 149°F.

HellermannTyton’s 7.7-in. low-profile cable tie features a compact, contoured head that fits tight spaces and protects adjacent bundles. It is designed for high-vibration environments and the outside serrations minimize damage to cable insulation. It can be used indoors and outdoors.

Underground Devices’ BNT nonmetallic cable support can be used with nonmetallic or steel stanchions. The arms are secured in place with nonmetallic pins, allowing for installation and removal without disturbing any cable. It is nonconductive and will never rust or corrode.

nVent Caddy’s CAT12SF Cablecat J-hook features a galvanized finish for smooth cable pull and corrosion resistance. It attaches to concrete, steel or composite metal decking, and the integrated pin installs using powder-actuated or single-shot gas-actuated tools. It is an alternative to cable trays.

HellermannTyton’s AT2000 CPK automatic cable tying tool features an overhead suspension system that makes the tool virtually weightless due to the counterbalance mechanism. It is designed for portability and ergonomic comfort during extended use on assembly lines, large cable management projects and similar applications.

Underground Devices’ cable sling is a temporary support for power and communication cables at job sites. It is UL-listed and made of a high-performance, noncorrosive, nonflammable polymer. It is designed for permanent installation in vaults, tanks and maintenance holes.

iToolCo.’s MCA01 Cable Mate transports a 250-ft. coil of MC. It prevents tangling while loading and unloading. It is compatible with most wire carts and is made of an all-steel construction. It is designed for commercial or residential applications.

Chalfant’s BKRS walkable cable tray is manufactured from 12-gauge steel. The nonslip treaded covers are over ¼ in. thick and ensure workers have a solid footing. It is available in 4-in. side heights and widths from 4–24 in. 

HellermannTyton’s Quick2Clamp is made of impact-modified, heat- and UV-stabilized PA66 material that ensures long-term durability. It can be preinstalled on the conduit, bundle or the struts themselves.

Champion Fiberglass’ Champion Strut is a fiberglass nonmetallic channel framing system that includes nonmetallic accessories, fasteners, hangers, pipe clamps and channels. It is UV-resistant, flame-retardant and lightweight. There are multiple strut channel profiles for many applications.

Eaton’s Type 3R EnviroShield wireway helps prevent cable degradation caused by UV rays, wind, rain, sleet, snow and salt spray. It provides a safe electrical system by eliminating exposed live cables and protects cables from insects, rodents and birds. 

Underground Devices’ Saddle Rack cable support is available in two sizes with one, two or three saddles. It is designed for all maintenance hole, tunnel and vault applications and can be used for new installations or retrofit jobs. It is nonmetallic and will not rust or corrode.

FSR’s Wiring Star 9-in. dual-path cable management system stores extra cable under tables, behind desks and in podiums and credenzas. With its concentric dual-coil design and variety of attachment points, multiple cables can be wrapped neatly in their own cable path.

ABB’s Ty-Rap heat-reactive cable tie changes color from green to translucent when in contact with a high-temperature surface. It operates in temperatures between –76°F and 185°F. The efficacy of heat-reactive
polypropylene material lasts 24 months under normal operating conditions.

Underground Devices’ heavy-duty nonmetallic cable rack is nonconductive and will never rust or corrode. It has the same loading capacity as comparable steel cable racks, and grounding and insulators are no longer necessary. It is molded from UL-listed glass-reinforced polymer.

Hilti’s CP 653 BA firestop sleeve is suitable for firestopping cable penetrations for single and bundled cables. It can be used in small to medium-sized circular openings in walls, ceilings and floors. It may be used in concrete, masonry and drywall and features a twist-to-close mechanism for repenetration.

3M’s cable stacker centers multiple cables on framing members. It offers space management and aids in identification while featuring durable plastic construction. The maximum operating temperature is 195°F.

SureFrame from AutomationDirect’s 30 series T-slotted rail profile comes in 30 mm x 60 mm and 60 mm x 60 options to provide flexibility. It is compatible with slotted rails and hardware from most other manufacturers.

FSR’s Smart-Way wall raceway enables users to route cables from the ceiling to the floor raceway. It provides a solution for walls that aren’t accessible due to fire rating, brick, concrete columns and more. The compartments offer space for power, Communications and A/V requirements. 

Hilti’s CFS-MSL modular fire sleeve can be used for firestopping low-voltage cable penetrations for single and cable bundles. It is made for small- to medium-sized rectangular openings in walls, ceilings and floors and is designed for frequent cable moves and additions.

ABB’s Ty-Rap TyGenic antimicrobial detectable cable tie inhibits microbial growth while delivering x-ray, metal and visual detectability. It is designed with UV-resistant material for operating in temperatures up to 185°F. The antimicrobial additive is effective against microorganisms, including various bacteria, viruses and more.

Legrand’s CabloBend cable tray is made of easy-to-bend flex wires, and there is no cutting required. It features vertical and horizontal angle adjustability to 90 degrees to fit any configuration. Rigidity clips are included to fasten sections together for added strength. 

Bridgeport Fittings’ NMCB-2 cable support comes with a nail for use on wood studs or ¾-in. thick furring strips to position nonmetallic sheath cable. It can position a single 14/2 to 10/3 NM cable or two 14/2 NM cables in each of three rectangular slots. The self-locking fingers prevent accidental removal of cables.

Atkore’s Eagle basket is made of steel wires creating a 2-in.-by-4-in. mesh cable basket to manage and route the growing number of cables necessary to keep an operation running. It can be formed in 90-degree radius bends.

FSR’s WM-CP-BCK block cable pathway is an easily adjustable wire duct. It routes cabling from the underside of a work surface to the floor. It works for for height-adjustable desks, and it has the option to add a mount.

Leviton’s cable-management clip aids in network management. The clip can support up to 24 cables and is designed to handle larger ones. The individual spring clips provide additional bend-radius control.

Ultratech’s Ultra-Sidewinder cable protector is placed over top cables that run across floors to protect them from foot traffic and more. The black and yellow modular panels snap together for a customizable length and articulate left and right at their joints. It is available in several sizes and with ramps for ADA compliance.

Bridgeport Fittings' MC-EZ-Pak is designed for connecting and supporting AC/MC cable. Each kit contains 25 E-Z Lock AMC-50QI cable connectors, 25 US-4461 universal straps and 30 3/4-in. wafer-head screws. All are UL-listed and ETL-Intertek. A free sample box is available for those who want to try before they buy.