Youngstown Glove’s 12-3365-60 FR ground gloves are made with a cut-resistant liner made with Kevlar fiber throughout for 360-degree protection. The palm, fingers and saddle are reinforced with a second layer of leather to enhance durability. They are flame-resistant, heat-resistant, arc-rated, and puncture-resistant.

Brass Knuckle’s Smartcut BKCR4300 gloves are made of HDPE with a latex coating and have a level 3 ANSI cut resistance. They are designed for material handling, including processing and handling glass, steel and plastic. They are available in five sizes.

Makita Tools’ T-04189 100% genuine leather cow driver gloves are made of breathable Durahide leather. They are water-, oil- and fluid-resistant. They feature an open-cuff design for easy slip-on. They are ANSI rated at abrasion level 3.

Klein Tools’ lineman work gloves have 4-in. leather and Neoprene cuffs with side vents. They are made of soft grain leather with reinforced leather palm and finger patches. They have double-row padded knuckles for durability.

Brass Knuckle’s SmartFlex BK360 cold-weather work gloves are engineered to keep hands warm and dry. They have a 13-gauge nylon shell over a soft, 7-gauge napped acrylic liner for warmth. They’re finished with a full foam latex palm and fingers, and three-quarter coverage on the back of the hand.

Youngstown Gloves’ 03-3060-80 general utility gloves have a nonslip reinforcement for durability and grip. The neoprene cuff has an adjustable Velcro closure. It features a terry cloth thumb for wiping away sweat and debris and a directional top of hand that wicks away heat and moisture. 

Magid’s ARC M01 Class 0 electrical insulating gloves are designed to protect against electrical hazards without hindering movement or chafing. They have a contoured shape that helps reduce hand fatigue. A rolled cuff allows the work gloves to slip on and off as needed, and ultra-thin rear labels are flush with the back of the gloves. 

Milwaukee Tool’s 48-73-8771 antivibration work gloves are designed for use while operating power tools. They are reinforced in high-wear areas such as fingertips, palms and in between the thumb and pointer finger. There is a breathable lining.

Youngstown Gloves’ 11-3285-60 FR utility gloves have a cut-resistant lining made with Kevlar fiber throughout the entire glove for 360-degree protection. They are also arc-rated, flame-resistant and waterproof. They have a 4-in. safety cuff for extended wrist protection.

Magid’s ARC M01 Class 0 electrical insulating gloves are designed to protect against electrical hazards without hindering movement or chafing. They have a contoured shape that helps reduce hand fatigue. A rolled cuff allows the work gloves to slip on and off as needed, and ultra-thin rear labels are flush with the back of the gloves.

SeeHerWork’s SHW-G02-XS women’s impact work gloves have knuckle and finger protection pads along the back of the hand for additional protection and dryness. There are touchscreen fingertips and a terrycloth thumb pad to wipe away sweat. A synthetic leather second layer in the palm and thumb crotch offers extra padding and protection.

Ergodyne’s ProFlex 850 insulated freezer gloves are recommended for temperatures between –5°F and –20°F. They have silicone patterned palms and fingers for a secure grip, and users can swipe and type on smartphones with the thumb, index and middle fingers with the gloves still on.

Magid’s M01 Class 0 rubber electrical insulating gloves feature ultra-thin rear labels that are flush with the back of the electrical insulated gloves, improving longevity and comfort while imparting important information critical to safety applications. The flexible design makes working with small parts easy. 

Milwaukee Tool’s ANSI/ISEA 105-2016 cut level 4, nitrile-dipped gloves are made of an 18-gauge knit for mobility. A reinforced nitrile coating between the thumb and index finger provides durability in high-wear points. They feature a color-coded wristband and back-of-hand logo for easy cut-level identification.

Youngstown Gloves’ 08-3085-80 gloves are warm, waterproof, cut- and puncture-resistant. The outer shell is a form-fit performance work glove lined throughout with Kevlar. The middle layer is a waterproof, windproof and breathable membrane designed to keep hands dry. The innermost layer against the hand is a warm and soft microfleece liner.

Klein Tools’ gloves feature a touchscreen-capable fingertip fabric. There is palm padding and an abrasion-resistant palm patch for added protection, as well as a soft suede palm for durability. It features a hook-and-loop wrist strap and strong TPR pull tab for easy on and off.

Brass Knuckle’s SmartCut BKCR3520 gloves are flexible due to their thin, 15-gauge composite shell. This flexibility is paired with an abrasion-resistant nitrile coat and reinforced thumb crotch. Sponge-like foam nitrile channels oil away from the surface for slip resistance. A full knit wrist prevents dirt, debris and cold from getting inside. 

Makita’s T-04276 advanced ANSI 2 impact-rated demolition gloves are abrasion-resistant. They are also touchscreen-compatible for smartphones and tablet use. They have a ribbed and padded palm for comfort and are machine washable. There is a flexible TPR hook-and-loop closure for a secure and customizable fit.

Uline’s Ansell electrical gloves are available in two colors to facilitate proper rotation between testing. They are made of 100% latex rubber. The Class 00 gloves protect up to 500V AC and are recommended for troubleshooting motors and low-voltage panels.

Milwaukee Tool’s winter performance gloves are designed to provide all-day warmth. They are made with a waterproof and windproof layer to help keep hands dry during the winter. The Smartswipe knuckle enables users to operate touch screens without removing gloves or having to wipe dirty fingertips across the screen.

Youngstown Gloves’ 12-3575-60 ground gloves have an FR liner made with soft microfleece throughout the entirety. These winterized work gloves are flame-resistant, cut- and puncture-resistant and arc rated. The palm features untreated sueded goatskin reinforcement on the fingertips, palm and knuckles for durability and protection. 

Brass Knuckle’s SmartFlex BK350 gloves seal out liquids and keep hands dry, making them less prone to skin diseases. The natural latex coating covers the full front and back of the hand, while an additional double dip of latex foam on the palm provides grip, abrasion resistance and tear resistance.

Youngstown Gloves’ 11-3285-60FR waterproof leather utility gloves have a cut-resistant liner made with Kevlar fiber throughout the entire glove for protection. The glove is sewn into an ergonomic, 3D pattern for dexterity, comfort and durability.

Superior Gloves’ Endura deluxe Kevlar-lined lineman gloves feature reflective cuffs with split leather for abrasion resistance. They are water-, oil- and stain-repellent and meet the ANSI/ISEA 107-2015 high-visibility accessories standard.

Brass Knuckle’s Smartcut BKCR3520 gloves have an abrasion-resistant nitrile coating on a thin, 15-gauge seamless shell of engineered composite yarn with high-performance polyethylene. Sponge-like foam nitrile channels oil away from the surface, allowing for slip-resistance. The thumb crotch is cut- and abrasion-resistant reinforced.

Superior Gloves’ Endura flame-retardant, antivibration gloves are made of high tensile-strength goatskin. The leather is treated with Oilbloc for water and oil resistance. There is antivibration palm padding and flame-resistant modacrylic lining in the back-of-hand and thumb areas. 

SeeHerWork’s SHW-G0 leather work gloves are made of premium, top-grain, soft cowhide leather with level 3 abrasion resistance, level 2 puncture resistance and a second leather layer in the palm for extra padding. There is a gun construction at the base of the fingers and keystone constructed thumb.

Magid’s D-ROC GPD782 work gloves feature a nitrile-reinforced thumb saddle and are touchscreen- compatible. The silicone-free coating helps prevent contamination on metal parts prior to painting and finishing. The shield graphic is color-coded by cut level to identify cut protection from a distance.

Superior Glove’s SnowForce extreme cold claw mitt offers two protection levels for temperature with two openings at the cuff: the first is designed for –4°F and the second for –58°F. The black cowgrain palm is abrasion-resistant and waterproof. The gloves feature an adjustable strap on the back, elasticized wrist for tightening the glove for optimal fit and a built-in goggle wiper on the side of the index finger.

Gear Wrench’s 86986 heavy-impact work gloves are made of thermoplastic rubber for impact protection. They feature a microfiber sweat wipe on the back of the thumb and a breathable inner layer on the back of the hand. They are touchscreen-capable and machine-washable.

Dovetail Workwear’s impact-protective, high-dexterity work gloves are fit for women. They feature Kevlar-reinforced palms and touch-sensitive index fingers. They have a four-way stretch and TPR finger and knuckle guards. They are machine-washable and breathable.

Milwaukee Tool's high-visibility polyurethane-dipped gloves have a reinforced nitrile coating between the thumb and index finger for enhanced durability in high-wear points. They feature touchscreen-compatible fingertips and are knit with 15 gauge for better dexterity when handling small objects.

Klein Tools’ 60188 professional-grade goatskin leather work gloves have knuckle and finger protection with PVC guards, and the mesh back and ergonomic shape provide dexterity. The cuff-strap's hook-and-loop closure ensures a snug fit, and EVA foam padding on palms gives extra comfort.

Superior Glove’s Endura anti-impact, cut-resistant gloves have a Kevlar composite lining. They feature hi-viz backing and a vibration-dampening padded palm. The 1.4-mm-thick, durable cowhide leather provides wear resistance. The 8-mm-thick TPR padding on the back of hand protects from blows and knocks. It is treated with Oilbloc for water and oil repellency.

MCR Safety’s 92901KD Safety Cut Pro gloves provide cold weather, cut and abrasion protection. They are fully lined with acrylic material that adds comfort. They feature a black nitrile dip foam that provides additional grip, puncture and tear-resistance on the palm side and over the knuckles.

Greenlee’s tradesman gloves are designed for work and outdoor activities. Made from materials designed for a combination of dexterity, comfort and protection, they have has high-density foam padding to absorb impact and vibration, and double-stitched wear pads on the fingers and palms for durability. Reinforced pull tabs make it easier to put on prolong the life of the seam.

Milwaukee Tool's Cut Level 3 insulated, cut-resistant, winter-dipped work gloves are designed to provide warmth, comfort and dexterity for handling small objects during demolition, wire-stripping and pipe-threading applications. They are constructed of double-dipped latex palm microfinish for water resistance and have a secure dual thermal liner—a warm acrylic terry liner and a 7GA inner liner for added warmth.

Southwire Tools’ electrician’s work gloves have padded palms and anti-slip material on the finger tips. They have a wrapped index finger for durability and are made of breathable spandex.

Oberon Co.'s rubber electrical glove kit meets or exceeds ASTM D120 and ASTM F696 standards. IT includes rubber electrical gloves, goat skin leather protectors and a canvas storage bag. 

Milwaukee’s Performance and Free-Flex gloves have touchscreen-compatible material on the fingertips, palms and knuckles; a terry cloth wipe on the back; mesh backing; padded, reinforced palms; and hook-and-loop closures. 


Brass Knuckle’s SmartCut BKCR3520 gloves combine medium-level cut protection with abrasion, slip resistance and dexterity. They have a slip-resistant, nitrile foam palm and a reinforced thumb crotch and a seamless shell made of 15-gauge, high-density polyethylene (HDPE) composite yarn, delivering ANSI level 3 cut protection.