Keystone Technologies’ KTLD-60-UV-12V-MC1 constant voltage LED driver will shut down and autorecover when its input power exceeds approximately 110% of 96W, which will not cause damage to the power supply. It has an internal temperature sensor on the primary power train.

Isolite’s EMP LED emergency driver has a thermally safe, high-capacity, maintenance-free lithium-iron-phosphate battery that provides the required 90 minutes emergency duration and environmentally friendly end-of life-recycling. It is rated for temperatures between 50°F and 122°F. There is a plenum-rated remote test switch with integral AC indicator that is mounted in a single-gang plate.

American Lighting’s C-AML-ADPT-30W  dimmable driver has an aluminum enclosure that includes knock-outs for quick installation. It can be used for under-cabinet lights, tape light and various LED fixture installations. It operates in temperatures between –40°F and 140°F.

Acclaim Lighting’s AL Driver 4 is a four-channel PWM dimming driver for low-voltage LED products with a wired digital communication network. It can take a DC input from 12V–24V DC and dims each channel with DMX. It can control up to 5A of multicolor LED products, and manual colors can be set.

Barron Lighting Group’s Exitronix LEMD series emergency LED driver is specifically designed to provide emergency lighting of LED fixtures with the loss of power. The remote monitoring system simplifies code compliance and reduces operating and maintenance costs.

Fulham’s ThoroLED T1M1UNV0350-15L 18W constant-current LED driver has an input voltage of 120V–277V. It is suitable for dry, damp and wet locations. It has a 50,000-hour lifetime at 176°F. It operates in temperatures between –40°F and 140°F.

Keystone Technologies’ Pocket Driver has compact dimensions to eliminate the need for remote mounting and fits into a wide variety of applications. It works in applications such as undervoltage, short circuits, overcurrent, over-temperature or no-load conditions.

Acclaim Lighting’s AL driver 200 C2 is a Class 2, multiprotocol, 200W driver for low-voltage LED products.
The input control protocols include DMX, RDM, 0-10V and DALI. Users can adjust settings and address through the onboard menu or remotely with RDM. 

Isolite’s EMP emergency LED driver is Class 2 compliant. It is IC-rated and suitable for use in plenum and damp location luminaires. It provides the required 90 minutes of emergency duration and environmentally friendly end-of-life recycling. 

ERG Lighting’s DoubleXFade programmable 50W constant-current driver features a universal AC input voltage and wireless adjustability. It can be used in LED tubes, light panels and linear fixtures. It has two separate outputs and
two sets of 0–10V dimming line. 

Philips’ CertaDrive LED driver gives users design freedom, and the lifetime of the driver is 50,000 hours. It can be used in waterproof luminaires and recessed, surface and suspended luminaires in offices. It offers basic specifications such as specific current and voltage settings. 

Barron Lighting Group’s Exitronix LBDX series LED backup driver is designed for emergency lighting by LED fixtures during a power loss. The low-profile configuration makes the series suitable for most preinstallation and on-site applications requiring emergency illumination. It works with or without an AC driver to convert new or existing LED fixtures into emergency lighting.

TRC Electronics’ APC-12-350 9–36V DC constant-current LED driver has a fire-resistant plastic enclosure. It can be used in indoor and decorative lighting applications and operates in temperatures between –22°F and 158°F. It cools by free air convection.