Siemens’ Cerberus PRO 50 point panel system is designed for small to mid-size facilities. It supports up to 50 addressable devices on Class A or Class B circuits. It has a custom PAD-5 power supply and features isolation device capability.

Fire-Lite’s ES-50XP addressable fire alarm control panel is a turn-key fire safety solution with a dual-path (IP/cellular) and dual-cellular (AT&T/Verizon) 5G LTE-M cellular communicator. It supports up to 50 addressable devices, including multicriteria fire and carbon monoxide detectors. It has four programmable function keys, and an integrated SWIFT display driver and annunciator built into the panel. It is ETL- and CSFM-certified.

Bosch’s FMR 7036 four-wire LCD annunciator keypad is used to establish the location of a fire alarm. The display shows alarm and status messages. It features silence and reset buttons and a built-in keyswitch. 

Potter Electric Signal’s ARC-100 is an analog/addressable releasing fire alarm system with a total capacity of 100 addresses. Additional system capacity is achieved using multipoint SLC modules. Each SLC may be comprised of any combination of smoke sensor, heat detectors or modules. 

Nest’s smoke alarm features a voice alert that gives users an early warning. The split‑spectrum sensor uses two wavelengths of light to detect smoke from fast-burning and smoldering fires. It checks its batteries and sensors over 400 times a day and quietly tests the speaker and horn monthly.

Kidde’s sealed lithium-ion battery-powered smoke alarm uses ionization-sensing technology. It may detect invisible fire particles that are associated with flaming fires sooner than visible particles. It is tamper- resistant, has an alarm memory and a flashing red indicator LED with four modes of operation.

Honeywell’s VESDA-E VES smoke detector enables users to divide protected areas into four sectors to help ensure detection and warning of a potential threat. It features an adaptive-scan threshold and flair-detection technology delivers warnings in a range of environments with minimal nuisance alarms.

Gamewell-FCI’s AAD-9400X FAAST XT aspirating smoke detector uses an infrared laser and a blue LED to detect fire conditions as early as 60 minutes before a fire starts. It covers up to 28,800 sq. ft. using four pipe inlets with ultrasonic flow and chamber-airflow monitoring, which provides system-health information. A particle separator and 30-micron filter expel particulates not associated with smoke. It has five programmable sensitivity levels, three selectable fan speeds and two sensitivity modes.