JLG Industries’ E18MCL drivable vertical mast lift features scissor steering, familiar controls, an ergonomic joystick and ease of entry/exit from the platform. It works on sensitive flooring and can access tight spaces with high transportability. It can be used for indoor and outdoor capabilities to complete a variety of tasks.

JLG’s 830P push-around lift is designed for finish work, sensitive floor applications and jobs that require users to maneuver it between different locations at the same site­. Once in position, simply lock the caster wheels and press a button to elevate. There is a flip-up and self-supporting platform, and it has a 14-ft. working height.

JLG Industries’ E18MCL drivable vertical mast lift features scissor steering, familiar controls, an ergonomic joystick and easy entry/exit from the platform. It can work on sensitive flooring and access tight spaces, and can be used indoors or outdoors. 

JLG’s 20E Toucan mast boom lift has a vertical telescopic mast with a jib that lets users reach up and over obstacles in tighter spaces than an articulating boom. It features nonmarking tires and efficient electric power for indoor jobs.

Hy-Brid Lifts’ PS-1930 is a self-propelled, electric scissor lift that features a slide-out deck extension with a slip-resistant surface. It works up to a height of 25 ft., and it does not require folding rails. It lifts up to 650 lbs. and features a full-swing entrance door, USB ports and a tool holder.

Jameson’s 12V DC multipurpose J-Lift enables users to load and transport cable, strand, wire, fiber and more. A minimum class IV hitch is required and enables one person to load reels safely. It directly mounts to service body pintle plate or slides into a square hitch receiver.

Custom Equipment’s Hy-Brid Pro Series self-propelled lift is designed for operators working indoors at elevated positions for prolonged periods of time. It has a large work platform high-lift capacity and built-in tool tray that allows contractors to bring more tools and materials up the lift. Its lightweight design and low floor-loading pressure allows for use on delicate surfaces or fresh concrete earlier. It fits through standard doorways and elevators.

Custom Equipment’s Hy-Brid HB-1430 low-level scissors lifts has a working height up to 20 feet. It has low wheel loads, platforms that are 25-by-60-in. and have 30-in. slide out extensions. The lifts can accommodate two people at a time and hold up to 670 lbs. The extensions have a maximum capacity of 250 lbs.

Custom Equipment’s HB-P1027 low-level scissor lift has a 22-by-37-in. platform and can lift as much as 550 lbs. It also has a 27.8-m. entry height and a zero-turn radius to help with maneuverability. The hydraulic system is completely self-contained with only two connection points, reducing the potential for hydraulic fluid leaks.


JLG’s nonpowered EcoLift 70 is 2 ft., 4 in. wide and has a platform height of 7 ft., 3 in and working height of 13 ft., 3 in. The platform can hold up to 330 lbs. It uses a stored power lift/lower system, requires no batteries or hydraulic fluid and has automatic locking wheels.