Arlington Industries’ VBR1 vapor-barrier cover prevents air infiltration around ceiling boxes without a gasket. It is designed for new work and offers easy installation on round or octagonal plastic or steel ceiling boxes. It’s also suitable for wall-mount installations.

Calbrite’s weatherproof device box cover is made of type 316 stainless steel polished to a standard “brite” finish for corrosion resistance. It can be used in harsh and damp environments, and the spring-loaded, self-closing lid covered with neoprene gaskets provides weatherproof protection. It mounts to all Calbrite stainless steel device boxes.

Arlington Industries’ FLBC5570 recessed cover kit fits 5½-in. concrete floor boxes. The thin flange and recessed devices reduce tripping caused by protruding plugs, and a divider and 4-port keystone device is supplied for a low-voltage option.

Arlington Industries’ nonmetallic hole cover kit ensures compliance with OSHA standards on multistory building sites. Now in three sizes, it is rated for a 250-lb. load. The 10½-in. diameter cover fits openings of 3¾–9¼ in. Retaining clips and a reference scale allow for precise sizing of the cover-to-hole diameter. 

Arlington Industries’ FLBC4560D recessed cover installs in a 4½-in. concrete floor box to reduce tripping. It has a divider for power and low-voltage in the same box. It comes with brass or nickel-plated brass metal flanges and light almond, gray, caramel, black and dark brown plastic.

Arlington Industries’ HC1742 nonmetallic hole cover kit covers hole openings from 1¾ –4¼ in. It has retaining clips that allow for adjustment to fit a range of hole sizes. The reference scale inside the cover allows for precise sizing to the hole diameter. Attach the retaining clips with screws.

Tenmat’s FF109-250 fire-rated light cover is developed for low-profile LED lights. It has been 1-hour fire tested to meet building code requirement and provide a fire barrier around LED lights. It is designed for both retrofit and new construction, and it is flexible enough to be installed through 4- and 6-in. ceiling openings.

Arlington Industries’ vapor barrier cover prevents air infiltration around single-gang boxes without the need for a gasket. Designed for new work, VB1 fits most plastic or steel boxes. It also helps meet energy saving codes where applicable and accommodates 1/2- or 5/8-in. drywall.

Pfannenberg’s rain hood protects applications from outdoor and harsh environments. It features a multi-dam seal technology and the high-compression, closed cell gasket ensures a proper seal. It delivers airflow capabilities and overspray protection. A bracket can be installed to the enclosure around the existing cutout for installation.

STI’s indoor and outdoor low-profile, polycarbonate, anti-vandal cover flashes and sounds a warning horn when activated. It protects against false fire alarms, physical damage, dust and grime. When lifted to gain access to the actual alarm, a piercing warning horn sounds and the cover flashes to help draw immediate attention to
the area.

Arlington Industries’ FLB6230MBLR cover kit allows for flush receptacle installation and is designed for placement on a concrete floor box. It has flip lids and includes a 6-in. brass cover, gasket, receptacle and a leveling ring. It fits most 41/2-in. concrete boxes.  

Arlington Industries’ 5¹/₂-in. nonmetallic concrete floor box has multiple slots for positioning low-voltage dividers and multiple conduit hubs and plugs. The recessed cover kit is designed with a flush-to-the-floor cover installation. It features two low-voltage openings, ultra-thin stamped steel flange, plated- or powder-coated zinc covers and a recessed device that reduces tripping.

Arlington Industries’ listed FLBC4580 IN BOX Cover Kits install receptacles, flush, in a 4¹/₂-in. concrete floor box. The brass-plated or nickel-plated metal covers have ultra-thin, stamped steel flanges that deliver flush-to-the-floor receptacle installations. Recessed covers install into the box, reducing trip hazards caused by plugs. Easy to install, they come with a divider for power and low-voltage in the same box.

Arlington Industries’ FLBC4580 in-box cover kit fits receptacles installed in a 4¹/₂–in. concrete floor box. The brass or nickel-plated metal covers have thin, stamped steel flanges that deliver flush-to-the-floor receptacle installations. The recessed covers install into the box, reducing trip hazards caused by plugs. They come with a divider for power and low-voltage in the same box.

Safety Technology International’s horn/strobe Damage Stopper helps protect units against vandalism and damage. This UL-listed cover is slotted for horn/strobe units and offers several clear spacer options. It’s molded of clear, thick, UV-stabilized polycarbonate material. The slotted dome attaches to the frame with tamper-resistant screws.

Mockett’s PCS104 slider cover power grommet is an in-desk power solution. The cover has two separate lids, which slide open and close independently, so users can open one side to access the power receptacle only, the other side to access the charging USB input, or both. Slide both lids closed for a clean and concealed look. It installs into a 3¹/₈-in. diameter cutout. Drop in from the top and secure to the desktop, then slide lids into place from either side to lock in place. It is available in satin aluminum, black or white.

TayMac’s Masque Revive wall plate cover provides a way to cover worn or discolored outlets and switches. It enables consumers to renovate homes without rewiring. The PVC material resists wear and tear and won’t crack or distort during installation. Single gang, two-gang or three-gang models are available.

Arlington Industries’ FLBC6230MBLR cover kit is designed for installing receptacles flush in concrete floor boxes. It fits FLBC4500 and FLBC4502 boxes and other manufacturers’ 4¹/₂-in. concrete boxes. It has flip lids and includes a 6-in. brass cover, gaskets, receptacle and a leveling ring.

Hubbell TayMac’s MX7200 Jumbo RaynGuard double-gang, die-cast aluminum in-use receptacle cover offers a 5¹/₈-in.-deep space for outdoor cords and plugs. It features a hasp for padlocks with shackles up to ¹/₄-in., a cord catch and rain chamber for splash protection.

Arlington Industries’ recessed in box cover kit installs into Arlington’s FLBC4500 nonmetallic concrete box. It is recessed and installs into the can, reducing trip hazards caused by plugs sticking out of the box. It also allows for power and low-voltage in the same box. It is available with metal and plastic flanges.

Hubbell Taymac’s weatherproof, nonmetallic, recessed MR420 device cover can be installed for new or old work and is compatible with all common siding type and materials such as vinyl, wood, stucco and brick/block. It can be mounted horizontally or vertically. It comes with an electrical box and optional siding flange. 


Arlington Industries’ recessed in-box cover kit is designed to install a receptacle in Arlington’s FLBC4500 concrete floor box. It is recessed and installs into the can to reduce the trip hazards caused by plugs sticking out of boxes. It allows for power and low-voltage cable to be installed in the same box. It is available with metal flanges in brass or nickel and plastic in light almond, gray, caramel, black and brown.


Orbit Industries’ nonmetallic weatherproof cover is made with impact-resistant, thermoplastic and has a pre-installed adhesive gasket and a padlockable design. One-gang covers are available in 2¾-in.-deep and a 3½-in.-deep models. Both feature 14 different device configurations. A 3½ in. deep, two-gang cover is also available and features 31 different device configurations. 


Taymac’s while-in-use weatherproof, clear receptacle cover has a polycarbonate body and polyethylene foam gaskets. It can be mounted horizontally or vertically and is available in duplex, Decora/GFCI receptacle, toggle switch and single receptacle models.