Southwire’s 16030A True RMS CAT IV multimeter automatically selects AC or DC voltage when connected to live circuits. The housing is IP-67 waterproof and dust-tight, and it has a built-in flashlight, noncontact AC voltage detector and autohold for fast touch-andhold readings.

Teledyne Flir’s Extech 381676A pen styled multimeter has a built-in NCV detector and nine functions including AC/DC voltage to 600V, AC/DC current to 200 mA and resistance. It features a rotary dial with alligator clips. 

AEMC’s 5231 digital multimeter provides a Volt, Ohm, continuity and diode function, as well as an AC voltmeter function with low input impedance that is capable of finding ghost voltages by adding a burden to the circuit. It performs AC/DC direct reading current measurements up to 600A with a current clamp accessory plugged in.

Southwire’s 63019140 16030A True RMS CAT IV multimeter automatically selects AC or DC voltage when connected to live circuits. It features a rugged IP-67 waterproof and dust-tight housing and a built-in flashlight. There is an auto-hold function for quick touch and hold readings.

Amprobe’s PM55A pocket multimeter features technology to direct the meter to know if it is measuring AC or DC volts or resistance with no user interface. It measures AC/DC current, capacitance, frequency and continuity with beeper. It includes a built-in, noncontact voltage detector. The digital display is oversized with large digits and unit icons in the display.

Amprobe’s AM-530 multimeter has True-rms technology that improves accuracy in electrically noisy environments. Noncontact voltage detection enhances safety, and audible continuity quickly identifies shorts and opens. A backlit LCD display with analog bar graph makes it easy to view results. Data hold freezes the reading on the display for analysis. 

AEMC’s MTX 3292B portable digital multimeter measures voltage (AC and DC), resistance, capacitance, temperature, duty cycle, pulse counts and frequency. It performs continuity checks and diode testing and includes an AC voltmeter function with low input impedance for finding ghost voltages. It is waterproof.

Fluke’s 87V max True rms digital multimeter withstands drops up to 4 m with an industrial-strength casing and holster. It features a waterproof, dustproof IP67 case for extreme work sites. It features a function for accurate voltage and frequency measurements on variable-frequency motor drives and other electrically noisy equipment.

Southwire’s compact 3-in-1 Cat 4 multimeter features a built-in noncontact AC voltage detector and LED flashlight. It has 10 measuring functions and the fuse automatically resets itself. It operates in temperatures between 0°F and 104°F.

AEMC’s OX 5042 handscope portable multimeter is ergonomically designed and has a 3.5-in. color screen with LED backlighting for a precise data display. It is an oscilloscope, multimeter and harmonic analyzer with 2 MB of storage for recording data.

Triplett Test Equipment and Tools’ 2030-C pocket-sized digital multimeter has a built-in hard case. It offers a variety of measurement features, including AC/DC voltage, AC/DC current, resistance, continuity, diode test, frequency and capacitance.

AEMC’s 6292 micro-ohmmeter can be used to accurately measure very low contact resistances of high-voltage circuit breakers, switches, busbars, etc., with test currents up to 200A. It operates in temperatures from 32°F to 122°F. It has filters and protection for measurements in electrical substations.

Amprobe’s 15XP-B 600V AC/600V DC digital multimeter is designed for electronics engineers, technicians and field service. It features a TTL logic test for digital circuits, an integrated tilt stand for bench use and a diode test for component-level troubleshooting.

Flir’s DM166 true RMS multimeter features a built-in thermal imager designed for high- and low-voltage applications. It visually guides users to the location of temperature anomalies and problems. It is designed for troubleshooting and diagnosing issues. Users can identify energized or potentially faulty equipment from a safe distance.

Fluke’s 87V Max True RMS digital multimeter is waterproof and dustproof. It operates in temperatures between 5°F and 131°F and up to 95% humidity. It measures up to 1,000V AC/DC and is designed to withstand a 4 m drop. It has a built-in temperature function; large display digits with a 2-level, bright-white backlight; and backlit keypad buttons.

AEMC’s MTX 3290 portable multimeter measures voltage (AC and DC), resistance, capacitance, temperature and frequency. It performs continuity checks and diode testing and includes an AC voltmeter function with low-input impedance for finding ghost voltages. It is waterproof and features an auto-range mode and data-hold function.

Fluke’s 1587 FC insulation multimeter features temperature compensation to establish accurate baselines and relevant historical comparisons. It measures AC/DC voltage, DC millivolts, AC/DC milliamps, resistance and continuity. It includes auto-discharge of capacitive voltage and it enables users to monitor test measurements remotely.

Amprobe’s DM73C pen probe digital multimeter with built-in test probe works in 600V AC and 600V DC ranges. It features a continuity beeper and an auto power-off function. It is designed to take one-handed measurements, and it features a 3,400-count digital display and analog bar graph.

Megger’s Avo 210 multimeter measures 1,000V DC and 750V AC and 10A AC/ DC ranges. It is used to measure resistance, frequency and capacitance ranges and is noncontact. It features a 2,000-count digital display.

Amprobe’s AM-420 residential digital multimeter is designed for home repair and electrical-testing applications. It measures voltage in receptacles, switches and more. It measures the presence of voltage in electrical sockets, extension cords, batteries and other electrical circuits up to 250V. 

Amprobe’s AM-530 multimeter measures AC or DC voltage up to 600V, resistance, frequency temperature and more. The noncontact voltage detection enhances safety, and the audible continuity identifies shorts and opens. It features a data hold that freezes the reading on the display for further analysis and a diode test to verify polarity.

Greenlee’s digital multimeter measures voltage, current, resistance and frequency. It warns when test leads are incorrectly inserted in current measurement terminals. It features auto and manual ranging noncontact and single-probe voltage detection.

Flir’s 18-function, digital True root-mean-square multimeter for electrical inspection is designed for industrial electricians and benchtop workers. It is capable of datalogging and storage for up to 10 sets of 40K scalar measurements, with a recall function for data review.

Flir’s DM284 true rms digital multimeter features infrared-guided measurement technology powered by a built-in 160-by-120 Flir thermal imager. IGM enables users to scan panels, connectors and wires without requiring any direct contact. It has built-in work lights and a laser pointer, and it features an 18-function DMM, including VFD mode, true rms, LoZ and NCV.


Southwire Tools’ Bluetooth-enabled multimeter, in combination with Southwire’s Mapp mobile app, enables users to view, record and share readings on their smartphone. It has an IP-67 waterproof and dust-tight housing, true rms and Low Z readings, backlit controls, a built-in work light and a magnetic hanging strap. 


AEMC’s handheld multimeters measure a variety of electrical and physical quantities including voltage (AC and DC), resistance, capacitance, frequency and temperature and are rated to 600V CAT III. They perform continuity checks, voltage detection and diode testing (including forward bias voltage). Measurement features include auto-range mode and a data-hold function.


Southwire Tools’ 11060S auto-ranging multimeter offers 1,000V input protection, IP-67 waterproof and dustproof housing and a CAT IV safety rating. Its 11 functions include capacitance, frequency, duty cycle and temperature. It has a backlit, 4,000-count display and a magnetic hanging strap.


AEMC Instruments’ MTX 3290 and MTX 3291 multimeters have a 2.75-by-2.04-in. backlit LCD screen with an onscreen connection indicator, auto-ranging current up to 10A and SX-DMM software for real-time data processing on a PC. It provides secondary measurements in addition to the main measurement for analysis and min/max and average data with relative time/date-stamping and voltage and current peaks. It is powered by four AA batteries; four NiMH rechargeable batteries are available with an optional external charging module.