Channellock’s 957 7-in. wire stripper includes a precision ground cutter, common stripping hole sizes and a lean nose design for pulling and looping wire. There is an ergonomic handle design and coiled spring reduce hand fatigue. It features laser-etched gauge indicators and a lock for safe storage.

Dynamic’s 14-piece insulated screwdriver set has interchangeable blades, including a variety of Phillips, Torx and slotted tips. The tips are precision-machined for an exact fit and have easy-to-read identification for selecting the appropriate tool for the job.

Greenlee’s insulated, square-tipped screwdriver is rated to 1,000V AC. It is built with precision-machined, black phosphate-plated tips for fastener contact. It is ergonomically designed for comfort and torque, and the dual-color insulation provides added safety.

Lowell Corp.’s 150 double-square distribution lineman’s wrench is designed for high-line utility pole installation and repair. The ergonomic handle shapes make work comfortable, and the bolt-thru design lets bolts pass entirely through the sockets and arm head so nuts can be secured on any threaded length.

Channellock’s 718 8-in. duckbill long-reach pliers are designed for hard-to-reach jobs. They have a flat nose and crosshatched teeth pattern. They are made of high-carbon steel and are specially coated for rust prevention.

Platinum Tools’ pro punchdown kit includes a Velcro, belt-attached pouch for secure containment, a NeverDull 110 punchdown blade and professional electrician’s scissors.

Jonard’s TSFB-125 thermal stripper is designed to thermomechanically remove coatings from optical fibers with cladding. It is compact and features adjustable temperature and time settings that enable it to adapt to a wide range of acrylate coatings and cladding sizes.

ICC’s single-blade punchdown tool can be used for wiring blocks, patch plugs, modular connectors, faceplates and patch panels. The high-impact setting is used when seating 110 connecting blocks into 110 wiring blocks.

Lowell Corp.’s 152 double square transmission lineman’s wrench is used for high-line utility pole installation and repair. The ergonomic handle shape makes work more comfortable, and a bolt-thru design lets bolts pass through the sockets and arm head so nuts can be secured on any threaded length. 

DeWalt’s DWHT68000 Max Fit 11-in-1 multibit screwdriver helps reduce the potential for stripped screws with a tight fit in fasteners. The removable shaft helps prevent loss of bits. The soft, bi-material handle enables users to comfortably grip and fasten or loosen screws. 

Southwire’s 5-in-1 multitool pliers feature a narrow knurled jaw for access to tight spaces. It cuts small-gauge copper wire and communication cables and crimps common size wire ferrules. Comfortable grips minimize hand wear and fatigue, and it reams thin-wall conduit ends.

Knipex’s 74 02 200 high-leverage diagonal cutter features a hand-friendly handle shape for ease of use, and the multicomponent grip provides user comfort. It features a forged joint axle for continuous demands.

Lawrence Sales Co. Inc.’s Light Bulb Changer is designed to provide an effective way to install and uninstall a BR 20 and BR 30 high-hat light bulb, including broken bulbs, without having to use a ladder. Simply thread the included reverse thread adapter onto a broom handle to use.

Knipex’s 95 16 165 cable shears are designed for cutting copper and aluminum single conductors as well as multiple stranded cables. It can be used to cut larger cable cross-sections. The insulating multicomponent grips additionally protect the user from an electric shock. 

Lowell Corp.’s 101 triple dual-end distribution lineman’s wrench features an ergonomic handle and fluorescent orange sockets, which make the wrench harder to lose and easier to find. The bolt-thru design lets bolts pass entirely through the sockets.

Milwaukee Tool’s MT505 long-nose pliers feature cross-hatched, laser-hardened teeth for maximum grip when pulling or twisting. The pivot point is designed to give leverage during tough cuts. It features a reaming head for ½- to 1-in. conduit and a fish tape puller. It comes with a comfort grip with a lanyard hole or a dipped grip with a split-ring hole.

Irwin Tools’ 20-oz. steel general-purpose hammer features a rounded handle design for comfort and control. The curved bottom prevents slippage, and there is a hardened end cap for durability. The magnetic nail holder offers hands-free versatility when setting a nail.

Jonard Tool’s MS-326 midspan slit and ring tool consists of five precision slitting and ring grooves for opening fiber jackets and loose buffer tubes. One side performs radial/ring cuts and the other side slits the cable.

Makita’s ML102 12V lithium-ion cordless LED lantern can be used as a lantern or flashlight by changing the internal LED direction. The conical reflector provides 360-degree illumination. The high-luminance single LED provides up to 100 lumens. It is 71/8-in. long and weighs 0.9 lbs. The dust- and drip-proof design allows for outdoor use.

Lind Equipment’s 15W Beacon360 Torch battery-operated handlamp is encased in an indestructible weatherproof unit. The four lighting modes are 360-degree high mode, 360-degree low mode, 180-degree mode and flashlight mode. The built-in magnet can be used to attach the light to metal.

DeWalt's DWHT20544 15-in. hand saw features a three sided tooth design and induction-hardened teeth that stay sharp. There are eight teeth per inch, and the handle is made out of plastic and rubber.

Ericson’s 12V, 7W LED, low-voltage hand lamp is designed for outdoor use and wet locations. It has a molded handle, glass globe and 50-ft. of heavy-duty cable. It fits an incandescent 12V and 75W bulb. 

DeWalt’s 3–lb. fiberglass drilling hammer has a forged steel body to withstand outdoor, rugged conditions. The handle is created with lightweight fiberglass and has overstrike protection to reinforce where handles break most. It has an overmolded textured grip and a medium-carbon steel head. It features a forged steel head and rubberized grips.

Klein Tools’ three-piece tool set includes everything needed to cut, strip and test cable. The 9-in. high-leverage side-cutting pliers are made from steel and have induction-hardened cutting knives. The Klein-Kurve wire stripper/cutter cuts, strips and loops 8–16 AWG solid and 10–18 AWG stranded wire. The noncontact voltage tester detects 50–1,000 voltages.

Commercial Electric’s five-piece electrician’s tool set includes a digital multimeter, a 7-in. solid and stranded wire stripper/cutter, 7-in. diagonal wire-cutting pliers, a set of 25 winged wire connectors and a 30-ft. roll of ³/₄-in. vinyl electrical tape.

Klein Tools’ line of duct and sheet metal tools, including a duct cutter with wire cutter, HVAC hand notcher, tin snips, a hole cutter and more. Products feature all-steel construction and nickel-chrome plated hardware, self-opening latches for one-handed operation and contoured grips covering hardened steel handles.

Crescent/Wiss' offset straight snips enable users to cut sheet metal more safely with offset blades to keep hands clear of the work area. They can cut up to 18-gauge steel and feature compound levers, precision-cast serrated blades and ergonomic grips. 

Reed’s PDEB250 cone chamfer tool chamfers the inside or outside diameter of plastic pipe from ¾–2 ½ in. nominal diameter, including metric sizes. It can be used with a drill or manually. It has a hardened steel blade for smooth cuts and long blade life.

Knipex Tools’ tethered tool pliers program feature lanyard connections and tether attachments in the form of plastic brackets with a closed wire clamp welded to the handle. The tool program includes high-leverage combination pliers, cable shears, mini bolt cutters, electrician’s pliers, lineman’s pliers, needle-nose pliers, a wire rope cutter and more. 


Klein Tools’ high-visibility Hi-Viz drivers feature glow-in-the-dark handles, which help users locate tools in dark or dimly lit places. The handles charge in either natural or artificial light, creating a bright glow that lasts more than 30 minutes. The chrome-finished Hi-Viz drivers come with a cushion-grip handle. Available models include a No. 2 Phillips screwdriver, ¼-in. cabinet-tip screwdriver, 6-in-1 multibit screwdriver/nut driver, No. 1 and No. 2 Phillips, 3/16-in. and ¼-in. slotted screwdrivers and 5/16-in. and ¼-in. hex screwdrivers.