Eaton’s UX LED hazardous area exit sign is field-configurable for red or green letters and chevrons. The heavy-duty, injection-molded polycarbonate lens protects against impact and corrosion. It operates in temperatures between –22°F and 122°F.

Barron Lighting Group’s 120/277V AC NY900E LED edge-lit series exit sign is completely self-contained. The low-voltage disconnect eliminates deep discharge and features brownout, short-circuit and voltage-surge protection. It comes in green or red LEDs, with field-selectable directional chevrons included for all configurations. Standard finishes are black, brushed aluminum and white. Custom legends are available.

Barron Lighting Group’s QCSS series combines LED exit signage with fully adjustable, square LED lamp heads. It mounts above doors and in restricted spaces. A snap-in canopy is included for top-mount installations. It is suitable for damp locations and has snap-out, field-selectable chevrons.

Barron Lighting Group’s 120/277V AC QXT series thin exit sign features a snap-in canopy for top mount installations. It operates in temperatures between 32°F and 122°F. It is suitable for damp locations and can be ceiling-, end- or wall-mounted. It has a flame-retardant, high-impact resistant thermoplastic enclosure.

Isolite’s LP2H 120/277V AC steel exit sign and emergency combo features energy-efficient, high-output LEDs. The line latch prevents unnecessary discharge of battery during installation—loads will not illuminate until after application of utility power. Brownout detection ensures emergency operation during periods of low line voltage. It operates in temperatures between 50°F and 104°F.

Barron Lighting Group’s NXF series exit sign is designed for extreme commercial and heavy industrial environments. It offers protection against humidity, dust and water infiltration. The reinforced polycarbonate enclosure with impact-resistant, UV-stable polycarbonate lens is suitable for vandal-prone areas and wet locations.

Orbit Industries’ ESBLM 120/277V AC micro-thermoplastic LED exit sign features a battery backup. It is listed for damp locations and includes a canopy for ceiling- or end-mounting. It has snap-out chevrons, directional indicators and an extra faceplate for field conversion to double face.

Isolite’s DualTech Hybrid exit sign is constructed of a two-piece, thick-wall, heavy-duty, die-cast aluminum alloy. Nonelectrical photoluminescence illuminates the letters when AC power fails.

Isolite’s CMB series thermoplastic combo LED exit sign features a 22 W battery capacity, 360-degree rotating side-mounted emergency heads and mounts on the wall or ceiling. It operates between 32°F and 104°F. The 6V nickel cadmium batteries provide 90 minutes of run time. It features flame-retardant and high-impact thermoplastic housing.

Isolite’s LP2H series steel combo exit sign is capable of powering remote lamps and is equipped with sliding faceplates. Constructed from durable 20-gauge steel, it has energy-efficient high output LEDs and operates between 50°F and 104°F.

Hubbell’s SERS series recessed exit sign is made of high-strength cast aluminum. It operates in temperatures between 32°F–104°F. It is designed for use in damp locations and conditioned spaces. It features LED lamps with rigid, high-impact, acrylic letter panel.

Isolite’s 120/277 V AC Max-C series exit sign is constructed of heavy-duty, die-cast housing. It operates in temperatures between 50°F and 104°F. It is designed for use in areas such as correctional facilities, schools and other places subject to vandalism.

Hubbell’s LT series 120/277V AC exit sign features an emergency lighting unit and UV stable thermoplastic housing. It is available with Spectron self-testing and selfdiagnostic electronics with a time-delay transfer standard. It operates in temperatures between 50°F and 104°F. Some models are rated for damp locations.

Fulham’s 120V/277V FHEC31 thermoplastic LED exit sign and lighting unit is injection-molded with an LED charge indicator. It is fully adjustable with glare-free lighting heads and is rated for damp locations. The snap-fit faceplate is designed for tool-free installation.

Isolite’s EXP series explosion-proof exit sign is designed for hazardous and damp locations. It features a curved legend panel that blends to create a floating edge-lit appearance. It is made of precision-cast aluminum housing and a laser-formed acrylic light guide.

Barron Lighting Group’s VEX-WP weatherproof and tamper-resistant LED exit sign is designed for wet, outdoor locations. It can be ceiling, wall or end-mounted. It is listed for locations between –4°F and 122°F and features a flame-retardant, high-temperature polycarbonate housing.

Isolite’s PH100 series photoluminescent exit sign can be seen from up to 100-ft. away. It is designed for outdoor, indoor and hazardous locations. It is available in single- and double-face models, and the panels are available in a red, green or black background. Its life expectancy is at least 25 years.

Hubbell’s PEERE-series, edge-lit, LED emergency exit sign can be mounted in a recessed wall or ceiling. The acrylic panels are ultrasonically welded and taped at the edges to maximize illumination and visibility. It can be ratcheted to various angles for mounting to angled surfaces, and it can be used in stairwells, hallways, offices and other commercial applications.

Isolite’s exit sign features a battery-diagnostic monitoring system. The injection-molded
internal cavity reflector provides ease of installation and maintenance together with even Illumination. It features
two-piece, heavy-duty walls constructed from die-cast aluminum alloy.

Isolite’s HZC Series exit sign is designed for use in harsh environments. It has fully gasketed, die-cast aluminum housing with an impact-resistant polycarbonate lens. It is constructed with stainless steel mounting feet, a removable front stencil face with an overlapping light seal and durable fiberglass.

Isolite’s DTH 2.0 series sign is constructed of a two-piece, thick-wall, heavy-duty, die-cast aluminum alloy. It is UL Approved for a 100-ft. viewing distance and UL-Listed to UL 924 Standard. It also combines two eco-friendly technologies: LED and photoluminescence. The non-electrical photoluminescence illuminates the letters when AC power fails.

Fulham’s FHEC30 thermoplastic micro exit sign and emergency lighting unit has LEDs in the exit sign and lamp heads. It has a push-to-test switch, LED charge indicator, a field-replaceable, snap-out/in chevron directional indicator and fully-adjustable, glare-free lighting heads. A Spanish “Salida” faceplate also is available.

Hubbell’s DYNC Combo exit/emergency lighting fixture has a fully gasketed, corrosion-resistant die-cast aluminum housing. Its clear polycarbonate face plate and lamp head covers protect the three high-power, adjustable LEDs. It provides up to 54 forward throw or 71 of side-to-side coverage.

Isolite’s UEL Series universal edge-lit emergency exit sign has a compact, low-profile design with recessed housing hardware included. Its pivoting mounting system allows the UEL Series to be surface-mounted at 0–90 degrees or recess-mounted. The design of the UEL Series makes it a good fit for virtually any application.

E-conolight’s LED exit sign has two adjustable 1W LED lighting heads and 6-in. green letters. It features a sealed, nickel cadmium battery backup; an injection-molded, 5VA flame retardant thermoplastic housing; and a universal knockout pattern on the back plate for wall mounting.

Isolite’s thin line, LED exit sign is constructed from die-cast aluminum alloy and features a removable front stencil face with 6-in.-tall letters. It is UL-listed for damp locations. Self-test/self-diagnostic monitoring and a polycarbonate security cover are available. 


Barron Lighting Group’s Exitronix VEX-WPC wet-location all-LED exit and emergency combo has adjustable LED lamp heads; an impact-resistant polycarbonate shield; and a UV-stabilized, impact- and corrosion-resistant ABS plastic enclosure with a one-piece, molded weatherproof gasket. An optional internal heater extends the operating temperature range from –4 to 122°F. It has a 90-minute emergency run time and a 24-hour recharge time. The single- or double-face sign has high-intensity red or green LEDs.