Eaton’s steel square outlet box is designed for use with rigid/IMC and EMT conduit. It can be used for audio, video, data and power applications in healthcare, education, commercial and government facilities. The 5-in. square series adapter plate accommodates the use of 4-in. square box covers, mud rings and tile rings.

Eaton’s Crouse-Hinds series C30 outlet box is installed in electrical systems within hazardous areas to provide protection against exterior explosion where acetylene, hydrogen and other hazardous gases are present. It protects conductors in threaded rigid conduit, acts as pull and splice boxes and provides access to conductors for maintenance and future system changes.

Eaton’s Crouse-Hinds Division 411/16-in. steel square outlet box is designed for use in commercial and industrial conduit applications, where larger sized conductor or wiring devices are needed and additional volume is required. It is for exposed work applications. The raised ground screw location saves time in installation.

Carlon’s 1-gang old work electrical outlet box is designed to work with nonmetallic sheathed cable. It is designed for light commercial and residential applications. It is crafted with nonconductive PVC for durability and is fire rated and UL Listed. The built-in cable clamps hold wires in place.

FEI Electric’s nonmetallic ceiling fan outlet box mounts to a wooden stud using screws. It is rated for a 35-lb. ceiling fan and 50-lb. fixture weights. It has a 2-hour fire rating, and the thick PVC material creates stability and rigidity. There are “V” wire clamps for sheathed wire entry.

Orbit Industries’ modifiable weatherproof outlet box features drilling indicators etched on four sides. Installers can drill ½- or ¾-in. knockouts anywhere on the plastic box to fit their specific needs. The 1-gang models are 25/16-in. deep, and the 2-gang models are 29/16-in. deep.

Calbrite’s Guax explosion-proof, dust-ignition-proof conduit outlet boxes are designed for use in hazardous areas and harsh environments to act as pull and splice boxes, and to connect conduit or conduit fittings. It is made from type 316 stainless steel to meet sanitary conditions and polished with standard “brite” finish for corrosion resistance. Tightening “ears” are integrated into the cover for tightening and removal.