Little Giant Ladders’ 15040-001 cargo hold is a sturdy tool pouch that attaches to a ladder. It is made of ballistic nylon and steel. It fits on the top rung of the ladder and can be placed in between the rungs. When users place the ladder in the storage position, the hold will stay in place so users don’t have to reattach it next time the ladder is used. 

1791 Everyday Carry’s mini action-snap belt organizer is designed for the storage of everyday carry essentials. The action-snap belt loops fit belts up to 1½ in. wide and come with snaps. The medium flex loop fits accessories up to 1 in. wide with clips, including small flashlights, pocket-sized multitools and more. 

Line Work Bucket Products’ socket pocket is equipped with two dowels and two augur bit holders. The central magnets allow for quick access to any small parts or tools users may need, and it can be accessed with primary gloves on.

Husky’s 22-in. connect rolling system toolbox features an interconnecting system allowing users to customize the way they transport tools and accessories. It includes a rolling cart, toolbox and small parts organizer. The rolling cart features 7-in. rolling wheels and strong telescoping handle, and the organizer features 12 removable bins.

Adrian Steel’s bin cabinet can be removed from a vehicle and taken to the job site or into the warehouse for faster, easier refilling. The folding hasp secures bins in the cabinet to hold them in place during a commute.

Jameson Tools’ 24-42 tool bag has webbed handles, 13 outside pockets and two grommets for hooks. It features a reinforced base and sides to prevent sagging and water retention. It can be mounted using a polymer S-hook. 

Big Ass Fans’ Pivot fan cools down tight workspaces, crowded floors and more. It is 6.35 ft. in diameter, and the airflow is felt at more than 120 ft. It has ceiling, beam and column mounting options for installation. There are six balanced, aluminum airfoils for precision airflow and a quiet operation with a gearless direct-drive motor.

Hilti’s VC 150-6 X compact wet and dry vacuum features housing, wheels and accessories to withstand the harshest job-site conditions. There is an automatic filter cleaning technology for high suction, or it can be switched off for quieter operation or increased water capacity.

Makita’s ADRM13 Outdoor Adventure 18V LXT Bluetooth radio and LED lantern features four LED modes: 360-degree lantern up to 310 lumens, three-sided lantern, flashlight and strobe flashlight. It is available in daylight white, neutral white and warm white. It features a built-in USB port for charging electronic devices.

Little Giant Ladders’ Platform Pro is a tool tray, portable workstation and platform step that connects to the inside or outside of an articulating ladder. It has a variety of tool holsters: slots for screwdrivers and hammers, cutouts for a drill’s belt clip and turning locks for a standard paint roller tray. It is designed to slide out of the way when climbing.

Makita’s LC09Z 12V Max CXT lithium cordless vacuum features three speed and off push buttons for operator convenience. An LED battery warning light indicates when to recharge the battery. It features a bagless 2-stage cloth filtration system for cleaning.

Arlington Industries’ CH1 2-in. plastic cable J hook for communications cable has a 25-lb. support rating. It is listed for use in air-handling spaces, and supports up to 90 Cat 5E cables with the center radius of the bundle spread over the 2-in. opening. It is stackable in parallel or perpendicular orientation for vertical support.

Atkore’s Eagle basket is made of steel wires creating a 2-in.-by-4-in. mesh cable basket to manage and route the growing number of cables necessary to keep an operation running. It can be formed in 90-degree radius bends.

Hilti’s X-BR S MX standard bridle ring offers support for wires, fire alarm cables and MC/AC cables. The plastic saddle ring supports high-performance data cable bundles and sensitive wires. It is preassembled with baseplate, and no drilling is required.

Irwin Tools’ 4031053 snap strap tape holder holds the measuring tape in easy reach on the user’s belt. It is made of saddle leather for added durability, and it fits all standard 2-in. belts. It is made of black leather.

Milwaukee Tool’s dolly is constructed with an impact-resistant polymer and has a 250-lb. weight capacity. It gives users a convenient way to transport their tools and equipment throughout the job site. The smooth-roll wheels easily roll with a heavy load, while a loading lever enables users to hold the dolly in place when loading and unloading.

Arlington Industries’ economical White Button Non-Metallic Cable Connector offers easy insertion of one or two cables into a single opening from inside or outside an electrical box. It’s the lowest cost NM cable connector on the market with fast, push-in installation.

Cerrowire’s packaging system is designed for mid-length wire pulls. The interlocking snap-and-pull design enables the user to configure the packs as needed to pull the circuit all at once. It features a remaining footage estimator and a clear plastic pack that keeps the wire clean.

HellermannTyton’s aerial support tie separates two bundles in parallel routing applications, such as telephone lines running beneath guy-wires. It features UV-resistant materials that contain an inhibitor that prolongs the life of the tie in outdoor environments.

KenzaPad's refillable notepad wallet is designed to house and protect a daily to-do list and ad-hoc notes in a stylish, analog accessory. It comes in three unisex colors of Mohali leather: black, brown and red. The cards are available in six templates: checklist, rules page, square grid, blank page, dots grid and grocery list.

Post-It's Extreme XL notes are designed for the construction industry and to provide more space to communicate messages. They are made with Dura-Hold paper and adhesive to withstand heat, cold, wind and water. They stick to a range of surfaces including steel, cement, PVC, plywood, brick, stone and more.

DeWalt’s ToughSystem portable, stackable radio and charger works as a radio or connects wirelessly to any Bluetooth-enabled smartphone or device up to 100 ft. away. It has four full-range tweeters, one subwoofer and one assisted bass resonator. The built-in charger charges 12V and 20V Max DeWalt power tools. It is IP-45 rated for water- and dust-resistance.

Platinum Tools’ Keyston Cat 6A jack is designed for tool-less installation and to be reusable. The color-coded wire guide ensures pairs stay in the proper order. It comes in multiple colors, so it can be used to replace old, worn-out jacks or be integrated into newer projects with little difficulty. It can be used with 22–24 AWG cables.

Ultratech’s Ultra-Sidewinder cable protector is placed over top cables that run across floors to protect them from foot traffic and more. The black and yellow modular panels snap together for a customizable length and articulate left and right at their joints. It is available in several sizes and with ramps for ADA compliance.

Klein Tools’ Tradesman Pro 2XL phone holder attaches to belts up to 2 in. wide with a metal clip. A magnetic flap keeps the holder closed and job site tech protected. It is constructed of 1680d ballistic weave.

Kwik-Draw’s Ultimate Kwiki holster has 4-by-5-in. pockets for small tools, pens and pencils, a universal locking tape measure holster and an attached aluminum cap for permanent markers. The wide clip on the back attaches to users’ belts or tool bags.

MonoSystems’ cable support extender is designed to provide a 12-in.-long-by-23/4-in.-wide support platform in place of 2-in. J-hook supports to reduce cable stress points, strain, sag and heat buildup.

Seek Thermals’ CompactPro high-resolution thermal imaging smartphone camera features a 320-by-240 thermal sensor, a 32-degree field of view, a focusable lens, a threshold mode, nine color palettes, a waterproof case and more. From up to 1,800 ft. away it can detect temperatures from –40 to 626°F. It is available for iPhone and Android phones, and connects through the smartphone’s power ports. 


IllumaGear’s Halo personal cordless safety and task light attaches to any standard hard hat and provides a 360-degree ring of light visible up to 1/4-mile away. It has an IP-67 rating, an average battery runtime of 15 hours and four light modes: halo, high-alert, task and dim.


Bridgeport Fittings' MC-EZ-Pak is designed for connecting and supporting AC/MC cable. Each kit contains 25 E-Z Lock AMC-50QI cable connectors, 25 US-4461 universal straps and 30 3/4-in. wafer-head screws. All are UL-listed and ETL-Intertek. A free sample box is available for those who want to try before they buy.


Heff Industries' Little Tool Mule ladder caddy is designed to fit on most aluminum and fiberglass ladders. It has slots for drills, hammers, screwdrivers and more. Its removeable pan is 6⁷/₈ in. long, 18 in. wide, and 4, 6 or 8 in. deep. A larger Big Tool Mule model is also available.