TCP’s 120V AC LED Deco lamp is damp location rated and can be used in outdoor applications. It replaces 25W, 40W and 60W incandescent lamps and has a life of 25,000 hours. It can be used in application such as accent lighting, chandeliers, ceiling fans and more.

LEDvance’s LED lamp has an energy-saving solution due to the motion sensor and automatic switch-off at daylight. It automatically switches off 30 seconds after the last motion detection. It has a detection range up to 3 meters at 90 degrees, and it can be used in applications such as staircases and entrances.

Halco Lighting Technologies’ ProLED Select HID retrofit lamp is designed for high bays, post tops, area lights and more. It features an aluminum housing with an efficient heat sink design and a clear, durable polycarbonate lens. It can be installed vertically or horizontally. 

TCP’s Elite LED decorative lamp is designed to mimic the look and feel of incandescent but last much longer. The color temperature is 2,700K, and it has an average rated life of 25,000 hours. It is damp location rated and can be used in outdoor applications. It can be used in fully enclosed fixtures.

RAB Lighting’s T8 tube lamp is rated for damp locations. It can be used on existing ballasts or wire directly to line voltage. Users can select the color temperature from five options and choose installation type in the field. It is dimmable down to 10% on compatible phase cut and 0–10V dimmers. It can be wired single- or double-ended.

LEDvance’s LED classic A 40 filament lamp is designed for decorative installations. The beam angle is 300 degrees, and its lifetime is 50,000 hours. It is dimmable and low flickering. It can be used in suitable outdoor luminaires only. No warm-up time is required.

TCP’s LED5E26S1427K 120V AC LED wet location lamp is designed for applications with hard-to-reach areas, vibration and frequent starts. It is nondimmable and has a rated life of 25,000 hours. The light output is equivalent to 40W.

EarthTronics’ G25 filament LED lamp provides 350 lumens and can continuously dim down to 9%. It has a 15,000-hour rated life. It comes in a clear or white finish for decorative applications. It works in temperatures between –4°F and 104°F.

HyLite LED Lighting’s high-performance LED Omni-Cob 100W lamp is designed for new or existing features in applications such as street and roadway, high bay and more. It is heat- and impact-resistant, UV-protected and shatterproof and has an optical glare lens. 

Barn Light Electric’s 120V LED Edison 120 lumen lamp has a 360-degree beam spread. It has a lifespan of 30,000 hours. It is dimmable and can be used in residential or commercial applications. It is typically used in bare bulb fixtures or wire cage pendants.

RAB Lighting’s A-line dimmable lamp has a durable plastic construction that lowers risk of breakage. The frosted lens produces smooth, diffuse light and is rated for use in dry and damp locations. It operates in temperatures between –4°F to 95°F and has a 15,000-hour lifespan.

LEDvance’s Sylvania 3,000K EverydayLED has an equivalent of 15W, a brightness of 1,100 lumens and comes with a rated life of 3,500 hours. It is designed with a medium base, and it has a white finish. It is not dimmable.

TCP’s AmberGlow 120V A19 lamp provides 5%–100% dimming. Classic White 2,400 color temperature closely resembles traditional incandescent lighting. High CRI output provides color consistency and rendering combined with the filament elegance and uniform light output.

Keystone Technologies’ omnidirectional LED HID lamp is field-adjustable. It is available with selectable outputs from 18W to 100W and has adjustable color temperatures of 3,000K, 4,000K and 5,000K. It features a thermal sensor that activates during high-temperature conditions, reducing power by up to 30% to cool the lamp. Once the sensor reaches an acceptable temperature, the lamp returns to full output. 

Phillips Hue’s Ellipse E26 smart bulb can be used in white and colors. It works with the Hue app, the user’s voice or smart accessories such as Amazon Alexa. It can be used in temperatures between –4°F and 113°F. Users can cluster bulbs together, and it is dimmable.

Wyze’s bulb color smart lamp can be set to 16 million colors and tunable white light. Users can automatically adjust the color to match the time of day. It works with Amazon Alexa and Google Assistant. Users can create time-based color events or automate using other Wyze devices to create visual notifications in the Wyze app.

Halco Lighting Technologies’ A19 dimmable lamp provides three levels of light. The omnidirectional optical design provides 230-degree light distribution, and it gives off light from all sides, including the top and bottom. It is UL Listed for damp location and enclosed fixtures. It is designed for floor lamps, table lamps, wall sconces and chandeliers. 

TCP’s LED 120/277V circline lamp has a 50,000-hour rated life for lower replacement and maintenance costs over its lifetime. It is designed for ceiling/surface-mount circline fixtures. It operates in temperatures between –22ºF and 113ºF. It can be used in environments such as restaurants, hotels, offices and more.

LEDvance’s Sylvania LED A19 lamp has a built-in motion sensor with a 360-degree angle of sensing and a range of 10–15 feet. It has a dusk-to-dawn sensor that only activates the motion sensor when ambient light is not present for efficiency. It can be mounted base up, base down or horizontally.

TCP’s LED5E26S1427KF LED 120V AC wet location S14 lamp can be used in environments with hard-to-reach areas, vibrations and frequent starts. It can be used in temperatures between –22°F and 104°F. It can be used in applications such as scoreboards, movie signs, chandeliers and more. The lamp life is 23,000 hours.

RAB Lighting’s HID replacement lamp has adjustable wattage, and CCT allows for in-field customization. Users can make it tunable white with the Lightcloud Blue 5-Pin plug-in controller. The integral driver enables the lamp to be wired directly to line voltage without the need for an external driver or ballast.

HyLite LED Lighting’s Lotus LED lamp has an instant start and restart, and there is no warm-up time required. It is designed to be used in applications such as theaters, places of worship, arenas and more. It is shatterproof and high-shock and high-vibration resistant. It is rated IP65 for protection against dust, debris and water infiltration. 

Philips Hue’s E12 smart lamp has a coiled inner filament and E14 base. It operates in temperatures between –4°F and 113°F, and it works with voice assistants such as Amazon Alexa, Google Assistant and more. Users can choose from over 50,000 shades of warm-to-cool white light. 

LEDvance’s E17 LED specialty lamp is a direct replacement for halogen lamps. It can be used for a variety of applications in both residential and commercial applications, including vehicles, closets, under cabinets and more. It operates in temperatures between –4°F and 113°F and can be used in damp locations. 

Earthtronics’ 1,200-lumen 10W LED high-lumen HID replacement lamp is available in 3,000K and 5,000K with full omnidirectional illumination. It is designed for retrofits in exterior wall packs, yard lights, post lights and more. It is rated for 50,000 hours.

TCP’s Anew lamp has a light spectrum that mimics the look and feel of an incandescent lamp but surpasses it by using less energy to deliver the same light output and offering a long 10,000-hour life. It minimizes the blue peak found in most LED sources and increases the red spectrum that brings back the warmth of incandescent lamps.

Halco Lighting Technologies’ HID LED retrofit color-selectable lamp has a clear, durable polycarbonate lens. It can be used in retrofits for high bays, post tops, area lights and more. It is listed for damp locations and is rated for 50,000 hours. It has an aluminum housing with an efficient heat sink design.

Barn Light Electric’s 6W oval LED Tala lamp has a 2,700K color temperature and offers 540 lumens. It has a brass cap with mouth-blown glass. The beam spread is 360 degrees. The average life expectancy is 30,000 hours.

Feit Electric’s 5W MR16 smart LED lamp enables users to dim and turn lights on/off, and set groups and schedules. There are millions of colors and tunable white options. Users can control lighting with voice commands or a mobile app, and it is compatible with smart home assistants.

TCP’s 30W energy-efficient high-lumen LED filament lamp fits high- and low-bay fixtures, as well as base-down and horizontal applications such as bollards and wall packs. It has a 360-degree beam angle and is rated for wet locations.

Halco Lighting Technologies’ 5W LED A-shape filament lamp includes 40W and 60W options. There are clear 2,700K and 3,000K options. The frosted 2,700K finish recreates the look of incandescent bulbs. It is dimmable to 5% and can be used in residential or commercial applications.

Megaman’s golden filament candle lamp offers 2,000K/2,500K color temperatures. It features linear dimming and 360-degree light illumination with uniform light distribution. It is designed to replace incandescent candles in decorative fixtures with its filament design, and can be used in commercial and residential applications.

RAB Lighting’s A-Shape commercial-grade lamp is designed to replace high-output incandescent or HID lamps in applications that require omnidirectional light output, with models up to 5,000 lumens. The heat sink technology extends LED lifespan, and it is suitable for damp locations.

Earthtronics’ 3-way LED A bulb is available in 2,700K and 5,000K. The cooling system provides for 15,000 hours of LED life, and it enables users to switch between three brightness levels of soft white. It has a color rendering rating of 83, and the beam angle provides full radial illumination.

HyLite’s 40W arc-cob lamp can be installed in new and existing fixtures. It is fully encapsulated, shatterproof and high-shock and high-vibration resistant. It features a 350-degree rotatable base for directional lighting. It is heat- and impact-resistant. It creates no UV radiation and does not attract insects. 

LEDvance’s Sylvania ultra LED day and night lamp allows for management of blue light exposure from low to high using an on/off wall/lamp switch. It can emit a natural 3,000K in the morning to simulate a sunrise, a cool 6,500K in the afternoon to create alertness and a warm 2,000K at night to help your body maintain its natural sleep-wake cycle​​.

TCP’s color filament A-Lamp is available in five colors: red, yellow, green, blue and pink. It features dimming down to 5%, and the LED configuration provides uniform color output. It is approved for damp and enclosed locations, and is designed for applications such as accent lighting. 

Halco Lighting Technologies’ A-shape LED lamp is available in 40W and 60W options. The beam angle is 300 degrees and can be used in applications such as residential, hospitality and light commercial. The color temperature is 2,700K, and it is dimmable to 5%. 

HyLite LED's NexGen OptiMax tube light replaces T8 and T12 fluorescent tube lights in new or existing fixtures. It is compatible with motion controls and sensors. It is available in 3,500K, 4,000K and 5,000K options. The beam angle is 320 degrees.

TCP’s AmberGlowB11 white filament lamp features high CRI output that provides outstanding color consistency and uniform light output. The 15,000-hour-rated life and low heat generation reduce replacement and maintenance costs. It is UL approved for damp and enclosed fixtures. 

LEDvance’s Sylvania Wi-Fi LED smart lamp is compatible with Amazon Alexa and Google Assistant. Users can customize brightness to their mood, an occasion or time of day. It can be used with the Sylvania app or voice commands such as dim, brighten, on or off. 

Shelly Bulb’s Duo E26 Wi-Fi operated lamp with dimming is designed to fit in a standard light socket. Users can choose their preferred color temperature, from warm to cool white. It can be controlled through the Shelly app or voice assistants. Users can set schedules and follow the sunrise
and sunset.

Halco Lighting Technologies’ LED performance A-shape (A19) filament lamp features omnidirectional light distribution. It has a 90-plus color rendering index rating that allows colors to appear more natural and truer to life. It can be used in residential and commercial applications.

RAB Lighting’s 80 CRI dimmable A-line bulb operates in temperatures between –4°F and 95°F and is rated for use in dry and damp locations. The durable plastic construction lowers risk of breakage. It is dimmable down to 10% on most common dimmer types.

TCP’s LED BR series lamp 10.5W, 120V is designed for sensitive display lighting because of the low heat generation. The durable plastic housing lowers the risk of injury and breakage, and it is UL-approved for damp locations. The lamp’s beam angle is 110 degrees.

EarthTronics’ 4.7W, 300-lumen A15 LED fan/small globe lamp can dim to less than 10%. It provides soft white light with a high color-rendering rating and is designed for use in ceiling fans and table lamps in residential living spaces. The 250-degree beam angle provides full radial illumination.

Philips Hue white and color ambiance E26 bulb can display 16 million colors at a color temperature range of 2,000K–6,500K. It has an instant 100% light output and can be controlled by Philips’ Bluetooth app, the Hue app, or Apple and Android voice assistants.

Megaman’s 5W, 220/240V E27 decorative lamp is dimmable to 100%, 50% and 20%. It operates in temperatures between –4°F to 113°F. The rated life is 15,000 hours, and the diameter is 64 mm.

Feit Electric’s 1W, 120V LED fairy light crackle RGB globe lamp plugs into any medium-base (E26) fixture and produces a multicolored glow. Mini-LEDs are embedded along flexible, ultra-thin metallic wire to create a magical glow. It is nondimmable and suitable for damp locations.

Wyze’s Bulb Color automates sleep routines by gradually illuminating or darkening with time. Users can command the lights by asking Amazon Alexa or Google Assistant to turn them on/off, adjust brightness or change color. Dedicated white light controls enable users to choose a setting. Custom presets to change scenes can be created with a tap.

Makita’s ML102 12V lithium-ion cordless LED lantern can be used as a lantern or flashlight by changing the internal LED direction. The conical reflector provides 360-degree illumination. The high-luminance single LED provides up to 100 lumens. It is 71/8-in. long and weighs 0.9 lbs. The dust- and drip-proof design allows for outdoor use.

Lind Equipment’s 15W Beacon360 Torch battery-operated handlamp is encased in an indestructible weatherproof unit. The four lighting modes are 360-degree high mode, 360-degree low mode, 180-degree mode and flashlight mode. The built-in magnet can be used to attach the light to metal.

TCP’s the Good Life 5W, 120V LED candelabra features dimming from 3,200K to 1,800K. It has an all-glass housing and is suitable for damp locations. It features a 360-degree beam angle and a 15,000-hour rated life. It has a minimum start temperature of –20°F.

Barron Lighting Group’s Tru Blue metal halide horticulture lamp produces a spectrum with a deep blue focus to keep plant internodal spacing short and compact during the vegetative stage. It is designed for plants in the beginning stages of growth. It is available in 600W and 1,000W. It operates in standard screw-in, mogul base fixtures and is open rated so it can be used in any fixture.

TCP’s Pro Glass A19 dimmable LED lamp features a very low heat generation and a 15,000-hour rated life. It is approved for damp and enclosed locations. The minimum start temperature is –4°F.

Sylvania’s 120V AC ECO LED B10 lamp is approved for use in totally enclosed fixtures. It is suitable for damp environments. There is no warm-up time, with an instant-on with full light output and stable color. It operates in temperatures between -4°F and 104°F. It is nondimmable with a 2,700K color temperature.

TCP’s LED HID T-Shape 25W replacement lamp is directional and delivers 3,750 lumens. It is nondimmable and the minimum start temperature is –22°F. The plastic lens helps to minimize glare and increase overall lamp performance. It is suitable for damp locations.

Sylvania’s Ultra SE LED dimmable reflector lamp’s color temperature shifts from 3,000K to 2,000K as the lamp dims. It is designed for recessed downlighting, track lighting and wall-washing applications. It operates in temperatures between –4°F and 104°F.

TCP’s DirecT8 LED Type A 5,000K tube is a compatible replacement T8 tube for linear fixtures. It has a 50,000-hour-rated life and is compatible with instant-start ballasts. It is rated for enclosed fixtures and has an instant on/off feature.

EarthTronics’ 8W Smart LED BR30 EarthBulb provides 650 lumens and replaces a 65W incandescent bulb. It can be controlled by iOS and Android phone and device apps or voice-controlled with Amazon Alexa or Google Assistant. Users can control white light from warm 2,200K to 6,500K daylight. The RGB function enables users to create infinite colors.

Oracle Lighting’s 38 W UV-C room sterilization lamp is tested to properly disinfect and inactivate 99.99% of bacteria and viruses, including COVID-19. It is designed to sanitize surfaces and PPE. The device will turn on and sanitize for 15 minutes and then automatically shut down.

Sylvania’s PAR38 LED colored lamp is suitable for indoor and outdoor applications. With no warmup time required, it produces an instant, full-light output and stable color. It is available in four colors, and the bug light features a yellow coating to keep areas insect free.

HyLite’s Intigo omnidirectional 35W lamp is designed for use in new or existing luminaires. It features a life of up to 6,000 hours and is rated for protection against contact, dust infiltration and water splashes. It comes in 3,000 and 5,000K options.

TCP’s 120V LED Par20 dimmable lamp is rated for 25,000 hours. It features a smooth outer housing, and the minimum start temperature is –30°F. It is suitable for damp locations. It is designed for applications, such as track lights, recessed downlights, display lights and outdoor fixtures that protect lamps from the elements.

Sylvania’s 10W Smart+ ZigBee full-color and adjustable white lamp is controlled by a smartphone, tablet or through voice integration. It is compatible with major smart home automation systems and features millions of color options. It is adjustable between soft white, bright white and daylight white. It is dimmable and the color temperature is tunable between 2,700–6,500K.

TCP’s 17W, 120V LED PL lamp is designed for use in commercial downlights. It is nondimmable and contains no mercury. The minimum start temperature is –20°F. It supplies 360 degrees of light output and can be used in vertical or horizontal applications.

Sylvania’s SubstiTUBE IPS Natural LED T8 lamp mimics the natural light spectrum because of TruWave Technology. It enhances color contrasts and delivers less intense blue light to reduce eye strain and improves readability. It supports an improved sleep-wake cycle while saving energy. It features a shatterproof frosted nano plastic design.

Feit Electric’s G63 300 lumen, 2,000K dimmable LED lamp features a flexible filament. It has an average life of 15,000 hours, is mercury-free and dimmable. It is designed for residential or commercial applications, while using 6.5W of electricity.

EarthTronics A19 amber filament LED provides 380 lumens and is designed to give full radial illumination. It has a 15,000-hour rated life, and provides 2,700K of soft white light with a high color-rendering rating over 80.

TCP’s 3W elite LED blunt tip deco lamp replaces 25W and 40W incandescent lamps. It is designed for damp locations and can be used in outdoor applications. The color temperature is 2,400K, and it is dimmable. It mimics the look and feel of incandescent but lasts longer.

HyLite LED Lighting’s HL-OC-10W-E26 Omni-Cob lamp features a 360-degree beam angle and is designed for fully enclosed features. It provides 60,000 hours of rated life and provides complete protection from dust infiltration and splashed water. No ballast is required for installation. Its small size enables use in small fixtures and tight spaces.

TCP’s Elite LED 120V Flame Tip Deco decorative lamp mimics the look and feel of incandescent but lasts longer. It replaces 25W and 40W incandescent lamps with a smooth, uniform dimming that is designed for chandeliers. It is rated for damp locations and can be used for outdoor applications. The color temperature is 2,700K and is dimmable.

TCP’s filament style 5W, 120V LED shape lamp has a rated life of 15,000 hours. It is approved for damp, enclosed and outdoor areas when protected from elements. It generates less heat to minimize how often it needs to be replaced. It fits most general applications. 

Ericson’s 12V, 7W LED, low-voltage hand lamp is designed for outdoor use and wet locations. It has a molded handle, glass globe and 50-ft. of heavy-duty cable. It fits an incandescent 12V and 75W bulb. 

Wyze’s Wyze Bulb 800 lumen tunable white LED Wi-Fi lamp enables users to turn the lights on or off, adjust brightness and change color temperature using Amazon Alexa and Google Assistant. The temperature range is 2,700 to 6,500K.

TCP’s LED 100–277V HID lamp series is designed for indoor and outdoor use. It is rated for open and enclosed fixtures and damp locations. It has a 360-degree, omnidirectional beam angle with a rated life of 50,000 hours.

TCP’s Starlight lamp can be used in pendants, sockets and more. It is dimmable and has a life of 30,000 hours. It can be used outdoor when protected from the elements and can withstand humidity indoor or outdoor. It is approved for damp locations and available in 9, 15, 19, 22 and 25W.

Sylvania’s ultra LED reflector lamp is dimmable down to 10% and available in 2,700, 3,000 and 5000K color temperatures. It is rated up to 15,000 hours and contains no mercury, lead or other hazardous materials. It emits no UV or IR radiation that can cause fading and discoloration of fabric or artwork.

Lind Equipment’s 120V VY3 hand lamp is designed for environments where water vapor is present. The glass globe is heat- and impact-resistant. The rubber handle resists grease, oil, solvents, temperature extremes and moisture. The metal guard is zinc-plated and features quick-latches for lamp replacement. 

TCP’s 5W decorative lamp mimics the look of an incandescent but lasts longer. It replaces 25W and 40W incandescent lamps. It is designed for use in indoor or outdoor locations and is dimmable. It is rated for 25,000 hours and has a beam angle of 570 degrees. 

Lind Equipment’s 100W Beacon 360 Blaze portable area luminaire illuminates an entire room. It is weatherproof and easily transportable. The 50,000-hour-rated LED arrays light up with the touch of the switch. It also features a variety of mounting options.

Keystone Technologies’ Xpander LED replacement lamp is designed for hard-to-fit shoebox and wall pack light fixtures. The rotating base allows the lamp to focus light where it is needed.

Signify's (formerly Philips) dimmable and energy-efficient LED lamp provides light in all directions. It is available in bent, blunt and flame-tip candles. It is designed for decorative installations where the bulb is visible for a vintage look. 

Hortilux's Super HPS Lamp provides 25% more light energy and 17% more total spectral energy in violet, blue and green. It is available in 250, 400, 600 and 1,000W. 

Global Value Lighting's durabulb lamp is shatter-resistant and designed to resist breakage due to impact, vibration and external stresses. It features multiple color temperatures, even illumination and form-fitting capabilities to fit in many luminaires. It provides uniform and omnidirectional illumination. It lasts up to 25 times longer than conventional lighting. 

Miller Lighting's 120-277V LED lamps can be used in a variety of luminaires, including floodlights, wall packs and high bays. The corn light is a straight LED that varies in size from 5–200W. The paddle light is 27–150W and designed for 90-degree fixtures. The LED products have higher lumens and feature 2,500K of light. 

TCP's LED classic filament B11 lamp is dimmable, omnidirectional and has a 15,000-hour life. It has an E12 base and comes in clear, frosted and amber. It replaces 25W bulbs. 

Feit Electric's 120V nondimmable A19 incandescent plant grow light provides the illumination necessary to grow and nourish house plants and flowers. The grow bulb has a special blue tint that provides natural light while emitting blue, green and red natural light. 

Buster + Punch's 120V AC dimmable, LED tube lamp features and extended resin light pipe at the center, which create a subtle glow and a functional spotlight below. 

Hylite's LED Lotus lamp is designed with a 180-degree adjustable bracket. This allows the lamp to be installed in multiple positions and at different lengths. It is designed for explosion-proof fixtures, cold storage and other hazardous environments. 

EarthTronics’ post light LED lamp features an umbrella design for focused light and pole applications. It is designed for sidewalks, walkways and site lighting. The 36W LED model produces 5,040 lumens, and the 54W LED lamp provides 7,560 lumens. It is rated for outdoor and damp environments and works in temperatures as low as –22°F.

GE Lighting’s HD 60W replacement lamp is an energy-saving LED that enhances the appearance of colors. It is dimmable and designed for use in nonenclosed indoor fixtures because of the crackle glass globe. It offers 450 lumens.

Sengled’s LED multicolor lamp adds colorful and smart lighting to the home. Users can choose from 16 million hues or tune white light from candlelight to daylight. It has a beam angle of 120 degrees.

HyLite’s LED Lotus lamp is designed for retrofit applications and is available in PAR46, PAR56 and PAR64 models. It is available in 15-, 25-, 40- and 120-degree beam angles and in 3,000 and 5,000K. It has a lamp life of up to 60,000 hours.

Sylvania’s Ultra LED vintage, shape lamps mix a retro style with a modern LED. Seven shapes are available—a heart, mushroom, pineapple, diamond and star.

GE Lighting’s C-Sleep lamp has three settings: a warm light at night, crisp light in the morning and light for everything in between. Users can group and control it alongside multiple lamps using an app or voice control with a smart home assistant.

Hortilux’s PowerVeg 660 flowering lamp is designed for indoor gardeners. It produces a red light spectrum that enhances the flowering stage for plants and is essential for triggering fruiting and flowering. Models that produce different color light spectrums (and support different facets of plant growth) are available.

Olympia’s CL-40W8-55K-E26 Cluster 41W LED post-top lamp is designed to replace 175-watt HID lamps. It has a standard E26 base, and releases 4,100 lumens of 5,500K daylight white light. It is rated for 50,000 hours.

Satco’s 5W decorative flame LED lamp has multifunction on/off switch to toggle between three modes—a flicker, a slow dim then brighten and steady-on mode. It is designed for wall sconces, faux fireplaces and other decorative applications.

EarthTronics’ energy-efficient, clear-finish decorative, EarthBulb filament LED provides a retro incandescent look, with an energy-efficient, filament-style LED array that provides 80+ CRI. It is available in a variety of lamp styles including general purpose, globe, candelabra and more. Most are available in 2,400K warm white and 2,700K soft white colors to replicate incandescent color performance.

Feit Electric’s A19, 60W LED bug lamp is designed for outdoor use as it helps keep areas free of bugs and insects by producing a yellow light that most flying insects and bugs cannot see. It replaces a 60W equivalent incandescent bulb and uses 5W of electricity.

Plumen’s original 001 CFL lamp is a designer, low-energy lamp with a sculptured form. It is designed to be a centerpiece of a room compared to traditional plain low-energy lamps. It is available in a 120V model with an E26 base and a 230V model with an E27 base.

Megaman’s Crown Silver LED lamp features a silver- or brass-plated crown and a clear finish. It is designed for mirror and decorative lighting. It provides nonglare light like an incandescent lamp. It produces 2,800 and 4,000K light. It is dimmable from 10–100 percent and available in E14 and E27 base models.

Philips’ SceneSwitch plug-and-play LED lamp enables users to switch between three different settings (a soft white light, daylight and a warm glow) using a standard light switch. Dimmers and additional hardware are not required. It memorizes the last setting automatically if they turn off the switch for more than 5 seconds.

Sengled’s Snap security camera lamp integrates an HD security camera inside a long-lasting LED floodlight. It offers cloud storage, motion alerts, night vision and a two-way intercom in a single, wireless unit. It twists into standard sockets. Users can access video on their mobile devices from anywhere.

DMF Lighting’s Apex Series LED DRD2X lamp delivers up to 750 lumens and 4,000 candelas and is 90+ CRI-rated. Users can switch between 20-, 30- and 40-degree beam angles. It is compatible with DMF’s OneFrame modular housing system, which enables users to mix and match lamps, trims and more.

Buster + Punch’s energy-saving Puck lamp is finished with an opal glass shell to produce a warm-white light. It is available in 5W dimmable or 2.5W non-dimmable options. It fits in any E27 screw light fitting.

TCP’s colored LED A15 lamp is designed for residential and outdoor applications. It is available in blue, orange, red, green, pink and yellow.

Lighting Science’s GoodNight sleep-promoting LED night light lamp is designed to help users fall asleep. It emits less blue light to support the body’s natural melatonin production and promote a healthy circadian rhythm.

Forever Lamp’s J Series LED industrial replacement lamp features a fanless cooling system that helps the lamp maintain a consistent temperature for applications where oil, dust and dampness are an issue for lighting fixtures. It delivers up to 21,000 lumens at 400W.

HyLite’s LED Intigo omnidirectional lamp is designed to fit in tight applications. It has a life of up to 60,000 hours and is available in 14W and 20W models to replace 70W and 100W MH/HPS lamps.

LEDvance’s Sylvania Smart, A19 full-color lamp can be controlled using Siri and Apple’s Home app. It doesn't require a separate hub, smart socket or Wi-Fi. Users can screw in the Bluetooth- and HomeKit-enabled lamp into any socket, sync it with the Home app and begin controlling it. Its features include dimming, adjusting the color temperature and choosing from millions of color options. 


Feit Electric’s glass color filament lamp is available in red, blue, orange, green, pink, yellow and purple. It is dimmable, uses 4.5W of electricity and has an average lifespan of 20,000 hours. It is designed for indoor and outdoor use.

Lunera’s LED plug-and-play sensor lamp uses existing infrastructure to deploy network sensors and controls. Built-in RF sensors monitor occupancy, ambient light, temperature and more. HID, linear and CFL LED models are available.


Ledvance’s Sylvania Ultra LED twisted filament lamp has a full glass body and a spiral LED filament. It has a 15,000-hour lifespan and a CRI of 80. It has a 2,700K color temperature and a 2,200K color temperature in 
the model with amber glass.

Lighting Science’s LSPro Durabulb shatter- and impact-resistant LED lamp provides uniform omnidirectional illumination using 7.5W of power. It has an E26 base, a lightweight design and a 10,000-hour lifespan. 


Nanoleaf’s Gem angular LED lamp is Energy-Star certified, works in standard dimming fixtures and has a 25,000-hour (23+ years) lifespan. It has a 2,700K warm white color temperature and is available in 5- and 7W options, which produce 470 and 800 lumens, respectively. 


Forest Lighting’s T8 LED integrated tube lamp incorporates integral drivers, is self-supporting and is suitable for damp locations. Units can surface-mount and link in chains up to 20 ft. long. It can connect directly to line voltage and can be used as a stand-alone fixture.


Eye Lighting’s Brutus metal halide lamp is available in pulse- or probe-start models. It has extra reinforcing braces and neck supports to withstand shocks and vibrations and to prevent electrical failures, arc tube dislocations, weld failures and breakage.

Sengled’s Pulse lamp combines a dimmable LED lamp with a multichannel JBL Bluetooth speaker in a single unit without wires or cords. As many as eight lamps (up to 100 ft. apart) can be linked together and controlled with the Pulse mobile app on iOS or Android devices. It has a standard E26 base.

Buster + Punch’s LED Buster lamp has a center resin light pipe, which allows for a focused spotlight and a warm ambient glow. It is available in dimmable and nondimmable options and comes in a warm gold, smoked grey or bright crystal finish with a satin metallic sheen. 


Larson Electronics’ VPLHL-7WLED-PC-GR30 waterproof, vaporproof LED hand lamp has a 10W, solid-state LED that produces 1,050 lumens of light capable of illuminating an area 8 ft. wide in all directions. It features a rubberized, insulated handle and a stainless steel wire guard. The cord reel is constructed of durable steel and includes a ball stop and a ratchet with a lockout feature.


Soraa’s Vivid directional LED PAR 20 lamp with GU24 base  produces 550 lm and is available in a 75W equivalent model. It is available in 8-, 9-, 10-, 25-, 36-, 50- and 60-degree beam angles, as well as 2,700K, 3,000K, 4,000K and 5,000K color temperatures. A long-neck PAR 30 model is also available.

Keystone Technologies’ SmartDrive HID replacement LED lamp is designed for both high-bay and low-bay applications. It does not require wiring changes; installers can plug and play with the existing magnetic ballast.

Halco Lighting Technologies’ JC2S LED is designed for landscaping to power pathway lighting. It has a G4 base lamp and is 0.98 in. high and 0.78 in. wide. It is available in 140 lumens at 2,700K and 150 lumens at 3,000K. 


Garvin Industries’ 150W, high-output, mogul-base, compact fluorescent lamp has a 6,500K color temperature and operates at 120V. It is designed for indoor or outdoor use and has a silent, flicker-free rapid start. It operates reliably down to 32°F.


Nanoleaf’s Ivy smarter kit is a voice-controllable, smart LED system. With the Nanoleaf app, users can create preset lighting configurations and control the lights with their iOS, Android or Amazon Alexa device. The kit comes with two Nanoleaf Smart Ivy lamps and the Nanoleaf Hub, which can control up to 50 lamps and is compatible with the Nanoleaf Smart Gem. 


G&G Special Environments’ waterproof IP69K lamp has push-and-click connectors and cabling, an embedded aluminum heatsink and a seamless polymeric outershell. It has an 8,000-lumen output.


Cooledge’s LED tile provides continuous, uniform backlighting. The tile is flexible, modular and scalable. It can be cut and bent. Multiple tiles can be connected together, and up to 50 tiles can be powered on the same LED driver.


Foreverlamp’s 1,000W plug-and-play LED lamp replaces metal halide lamps. It delivers up to 42,000 lumens and works with existing magnetic ballasts and sockets. It does not require rewiring or reconfiguration to install. 


Forest Lightings’ 4-ft. UniV8 T8 LED linear lamp is designed for direct-wire and ballast-compatible applications. It produces up to 115 LPW and is available in 15W and 19W models at 3,500K, 4,100K, 5,000K or 6,000K color temperatures.


ABB LIghting’s LED BR lamp is designed to replace incandescent reflector lamps. It is dimmable to 10 percent and has a 105-degree beam angle. 


Lunera’s HID LED 360 lamp replaces metal-halide, high-pressure sodium and LED corncob lamps with E39 or E26 bases that are less than 400W. It is available in ballast- and line-driven models and 8,000 or 5,000 lumens.


Nanoleaf’s Bloom dimmable LED lamp does not require a dimming switch. It is screwed into a luminaire and then controlled with a typical on/off light switch. Users turn the switch off then on to begin dimming the light and then flip the switch off and on again to maintain that level of brightness.


HyLite LED Lighting’s plug-in LED lamp is designed for downlighting applications. It delivers 116 LPW with a 120-degree beam angle. It operates on 120–277V and does not need a ballast.


Soraa’s Vivid dimmable MR16 LED features full visible-spectrum light and a digital two-stage driver. It is designed to eliminate the stroboscopic effect, or invisible flicker. It is available in 10-, 25-, and 36-degree beam angles.


Larson Electronics’ T8 15.9W tube LED replacement lamp works with any T8 fluorescent luminaire and can be directly plugged in without rewiring. It is directional, offers a 140-degree beam spread, has a polycarbonate lens and aluminum housing and runs directly off 100V–277V.


Stack’s Classic lamp is designed to automatically maximize energy savings using occupancy sensors and natural light. It mimics sunlight throughout the day, adjusting the color temperatures to the time of day and dimming and brightening according to the natural light in the room. It is fully controllable from the Stack Lighting app and learns from your preferences over time.


Sylvania’s Ultra LED Night and Day A19 lamp enables the user to control blue-light exposure from low to high with an on/off switch. It helps promote natural sleep in “night” mode and natural awareness in “day” mode.


Lighting Science’s LSPro 13W PAR30 lamp is available in a flood light and narrow flood light option and four color temperatures: 2,700K, 3,000K, 4,000K and 5,000K. It is dimmable and features 90 CRI. 

Universal Lighting Technologies’ Everline T8 LED linear tube lamps are designed for T8 fluorescent lamp replacement and can be installed directly into existing fixtures with electronic T8 ballasts. They have a seamless glass design, a 240-degree beam angle, no warmup time and a 50,000-hour lifespan. 


Cree Inc.’s TW Series PAR30 LED lamp is designed to deliver focused light to display artwork or home decor. It produces a 3,000K warm-white light with a CRI of 90. It is fully dimmable and designed to last more than 25,000 hours. It is available in short-neck and long-neck models and in 25-degree spot or 40-degree flood beams.


Forest Lighting’s UniV8 T8 LED linear lamp is designed to operate with or without a ballast. It is 4 ft. long and available in 15W and 19W models in four color temperatures (3,500K, 4,100K, 5,000K and 6,000K). The CRI is 80 RA, and the efficacy is up to 115 LPW.