Ideal Electrical’s 13-in. large-mouth bag features a sturdy design that opens completely for easy access. There are 20 interior and exterior pockets, including a protective phone/sunglasses case. It is reinforced to hold itself open and includes a shoulder strap and tape chain.

Petzl’s Transport 60 backpack has a padded back panel, shoulder straps and waist belt with thermoformed foam for comfort, even when carrying heavy loads. It is constructed with high-strength TPU tarp material to withstand intensive use without premature wear. It can be hauled, hung open at a workstation or carried using one of the three handles.

Channellock’s TGM3G tool tote has 10 pockets and a full structure opening. It has six interior pockets made with mesh fabric banded with a gripper elastic for added security and visibility. It features a removable single zip pouch for additional grab-and-go storage of loose parts, and a kneel pad is removable for comfort.

Jonard Tools’ RTB-18 rolling tool bag is made of 1680d ballistic nylon material to resist scratches. It features large treaded wheels for rough terrain and has 18 organizer pockets. The 13-in.-high interior makes room for long screwdrivers and tools.

Ideal Industries’ Pro Series dual-compartment backpack includes two compartments that can open to a lay-flat position for flexible use on the floor, bench or hoist. It has interior and exterior organizational pockets, an integrated drill holster and a dedicated space for a laptop or tablet. There is a protective phone/glasses case and a removable tool pouch.

Hultafors’ 18-in. contractor’s closed-top tool bag is made of heavy-duty polyester fabric. The pop-open design with large interior compartment allows for easy access to all needed parts and accessories. It includes a measuring tape clip and flap pockets to secure valuables.

Channellock’s TBP1G single-compartment tool backpack is modular to accommodate exterior accessories with an open interior for large-item storage. It is handcrafted, designed, manufactured, assembled and packaged in the United States. The front panel enables customization, accepting a desired hook-backed patch or light accessory.

Milwaukee Tool’s Packout 10-in. structured tote tool bag features tear-resistant, layered ballistic material and a reinforced structure that holds its shape over time. The bag has a carrying capacity of up to 50 pounds.

Jonard Tools’ RTB-18 rolling tool bag is made from a durable 1680d ballistic material. It features large treaded wheels to handle rough terrain and has 18 organizer pockets. The 13-in.-high interior provides room for long tools. 

Hultafors’ 18-in. roller tool bag features threaded wheels to transport tools. There is a double zipper top attachment to telescoping handle for full access to the main compartment. It is constructed from heavy-duty ballistic polyester fabric for durability.

Ideal Industries’ 18-in. large-mouth bag opens completely for access to large tools. It is reinforced to hold itself open, and a removable shoulder strap is included. It features outside and inside pockets for hand tool storage and a rugged zipper to prevent tool loss. 

Knipex’s 00 50 50 T LE tool bag is designed for working at heights. It features 11 steel D-rings: 8 for attaching tethered tools and 3 to attach to climbing equipment. There are two external metal retaining clips for cordless power tools.

Jameson Tools’ 24-42 tool bag has webbed handles, 13 outside pockets and two grommets for hooks. It features a reinforced base and sides to prevent sagging and water retention. It can be mounted using a polymer S-hook. 

Ideal Industries’ 13-in. Pro series large-mouth bag features a sturdy design that opens completely for ease of access to tools and equipment. There are 20 pockets and a hard protective phone/sunglasses case. It includes a shoulder strap, tape chain and tape measure clip. It is reinforced to hold itself open.

Buckingham Manufacturing’s Buckpack gear backpack is made from a heavy-duty waterproof vinyl and Cordura material. There are high-grade zippers throughout, and the shoulder straps can be packed away into a separate storage pocket when not in use. The back padded pocket provides storage for hand saws, laptops and more.

Bag Pro’s PPE Bag features two compartments, one of which is for safety shoes and has an external access. It is water-resistant and has an internal pocket for change, keys, mobile phones and more. There is an adjustable shoulder strap and hand handle.

Makita’s 831269-3 tool bag has a large interior for storing tools and accessories and wheels for easy transporting. It has a carrying handle and shoulder strap, and is made of durable and lightweight materials.

Ideal Industries’ pro series large-mouth 16-in. bag has 26 total interior and exterior pockets, including a protective phone and sunglasses case. It is reinforced to hold itself open and includes a tape chain and tape measure clip. It has a shoulder strap and side pull straps for easy transport.

Greenlee’s 0158-25 16-in,. heavy-duty, open tool tote features an ABS waterproof plastic bottom. Reflective piping helps with locating the bag in dark work spaces. There are 19 double-stitched pockets, and the steel-formed handle with foam-molded grip swings out of the way for tool access.

Buckingham Manufacturing’s 1215G9 12-in.-by-15-in. canvas bucket is constructed with heavy canvas, a solid continuous PVC ring around the top and a molded rubber bottom. Reinforced rope-support holes prevent wear, and the heavy-duty nylon thread will not rot or fall apart.

Petzl’s Duffel 65 medium-capacity transport bag features padded back and shoulder straps and has a volume of 65 liters. It can be carried multiple ways and is made of high-strength TPU tarp material. The large opening gives access to equipment, including two pockets in the inner flap and a large side pocket. It features a transparent area for quick and easy bag identification, four webbing handles and eight equipment loops inside the bag.

Milwaukee Tool’s lineman’s compact aerial tool apron has 18 custom pockets, including a dedicated floodlight pocket, puncture-resistant knife pockets and magnets to hold sockets in place. The tool board is constructed with durable vinyl material and features two nickel-plated brass eyelets. The built-in weep holes allow for water drainage in the pockets.

Klein Tools’ hard-body aerial oval bucket contains 15 interior and 14 exterior pockets. It is made of rugged polyester and includes web handles. The black, molded polypropylene bottom has drain holes. It is designed to transfer tools safely and weighs 3 lbs.

Husky’s HD10030-TH 12-in. 5-gallon bucket storage jockey is made of 600-denier heavy-duty, water-resistant polyester material. It includes 30 pockets of different sizes for tools and accessories. It fits most 5-gallon buckets.

Greenlee’s 0258-13 leather, five-pocket pouch with a large, divided main pocket area is designed for easy storage and tool access. It has four smaller compartments tapered for tool stability, washer rivets for extra strength and an extra-large metal tool clip. It has a tape chain and heavy-duty tape measure holder.

Makita’s 831271-6 21 x 12-in. contractor tool bag is constructed with industrial fabric for use in harsh job site conditions. It features six exterior pockets and four interior pockets for storage of smaller items. It has a high-quality zipper.

Ideal Industries’ Tuff-Tote leather tool carrier features two divided compartments with six screwdriver loops, one center compartment, four outside pockets and eight outside tool loops. The design keeps tools standing upright for identification.

Southwire Tools’ messenger tool bag features internal storage loops and several internal and external mounted zippered pockets. There are grommets on the outer flap for hanging the bag, and the padded mesh shoulder straps offer protection and carrying comfort. It is constructed from 2,400d ballistic weave nylon for durability.

Greenlee’s GRE-6 interchangeable-head cable termination tool is designed for cutting up to 750 kcmil copper/aluminum building wire. It is a multifunctional tool that crimps connectors, punches electrical panels and cuts wire up to 477 kcmil ACSR and up to a 3/8-in. guy wire. The 360-degree head rotation increases maneuverability.

Ideal Industries’ Pro Series tool carrier features a sturdy, lightweight design for organizing and transporting tools. There are 34 internal and external pockets. It has a shoulder strap, molded carrying handle and includes a tape chain and tape measure clip.

Rack-A-Tiers’ electrician bag/belt combo is a support belt and tool pouch with nine pockets, hammer holster and tape holder. It features high-density nylon insidethe belt to provide strength to stitching and stress points, as well as double metal buckets. Metal rings are stitched to the belt’s web core with high-density nylon.

Klein Tools’ rolling tool bag feature 8 in. wheels that provide high clearance to roll over rough terrain, and the telescoping handle enables easy maneuvering on the job site. The hard top allows for stacking additional materials on the surface. It is load-tested up to 250 lbs. The interior accommodates large tools and increases tool visibility. The exterior webbing and D-rings allow for bungee cord attachment and other add-ons. It is water-resistant and has 19 pockets.

Platinum Tools’ EZ-RJ12/11 die is used to terminate EZ-RJ12/11 connectors. It is interchangeable and reversible when used with EXO crimp frame. It includes a single-cycle crimp and flush trim, and connectors lock into the tool for correct positioning during crimp. It can also crimp other standard “non-EZ” or pass-through style connectors.

Klein Tools’ Signature Series tool bag is made with No. 8 canvas. It has a rivet-reinforced opening and a steel-hinged frame. The leather handles are stitched and riveted, and the lower sides and bottom are made of moisture-resistant vinyl with nonscratch studs on the base. It is available in 12-, 14-, 16- and 18-in. models with options for shoulder straps, shoulder pads, snap hooks and ring fasteners. Custom embroidery on the side is available.

BagPro’s electrician’s rolling tool backpack has a semi-rigid structure, retro-reflective stripes, label holders, adjustable straps and a telescopic handle. It is made from blue canvas and features storage space for a laptop, documents, a helmet and a variety of hand tools.

Werner’s 15-lb. tool lanyard is designed to protect tools, property and crews working below. It is made of a stretch cord surrounded by durable webbing and can hold up to 15 lbs. It is 30 in. long when retracted and up to 50 in. long when extended. It includes a carabiner and drawstring connection, so it can be attached to a work belt or harness.