Volt Lighting’s mini round brass flood light is built with a solid brass construction, moisture-tight design and an adjustable knuckle for precision aiming. The silicone plug at the lead wire exit prevents ground moisture and insects from entering the luminaire from the stem. 

Milwaukee Tool’s 2359-20 M18 Rover folding floodlight delivers 1,000 lumens with 12 hours of running time on high. It features one 12W USB-A and one 27W USB-C port. It is designed with four output modes and 300 degrees of horizontal and 180 degrees of vertical light head mobility. It has an attached metal rafter hook that can be extended to hang the light when work surface space is limited.

Lind Equipment’s LE980LED flood light replaces 1,000W metal halides. It can be retrofitted onto existing light towers, used as a crane or pit light, or bought complete with tower or cart. It is weatherproof and has an adjustable yoke and instant start.

Orbit Industries’ LFL20 series knuckle mount LED flood light is designed for various outdoor applications. The UV-resistant, die-cast design and low power consumption provide an ultra-bright light and service in wet locations. It operates in temperatures between –4°F and 104°F. 

Ericson’s 1009-HAZ-60 hazardous location floodlight has a 120-degree beam angle. It is made with a copper-free aluminum enclosure and high vibration resistance. It works in temperatures between –40°F and 104°F. It is designed for locations that have high humidity and temperatures, such as distilleries and pumping stations.

Eaton’s Crouse-Hinds series CEAG PXLED floodlight is certified for use in IEC zones 1, 21, 2 and 22 hazardous areas and has a 100,000-hour rated life at 77ºF. It is designed for ceiling and wall mounted general area lighting where flammable vapors and gases are present, and harsh conditions including vibration, dust, moisture and more.

Halco Lighting Technologies’ mini bullet floodlight has a toolless adjustable head for precise illumination. It features adjustable visors to prevent glare and an internally sealed design to shield water and dust from entry. It is wet-location-rated and designed for outdoor use. 

RAB Lighting’s X34-450SF floodlight has a 50,000-hour LED light span. It is suitable for wet locations, and the color temperature is selectable by 3,000K, 4,000K and 5,000K. The lens is tempered glass and has an ingress protection rating of IP66 for dust and water. 

Lind Equipment’s Beacon XP970LED explosion-proof hazardous location floodlight features a thin housing for portability. It can be mounted on tripods, floor stands, magnets and scaffolds. 

TCP’s Select Series LED outdoor flood light features 3,000K, 4,000K and 5,000K color-selectable options.­ It is equipped to handle any wall-washing, sign illumination or accent lighting applications. It features tamper-resistant tempered glass.

Orbit Industries’ AWC-LFL7 series slim LED floodlight includes adjustable wattage and color temperature. It has 15W, 20W, 30W and 50W settings and CCT levels of 3,000K, 4,000K, 5,000K and 5,700K. Outputs are field-selected at installation through a DIP switch and tuning knob.

Makita’s DML805 18V LXT lithium-ion LED work light features adjusting knobs that enable the user to direct the floodlight to a desired angle. It provides 10 hours of continuous illumination, and the integrated handle can be used as a hanging hook.

Access Fixtures’ APTI-V 450 LED floodlight is a commercial and industrial sports light. It includes a slip-fitter mount for mounting flexibility. It is available in five Kelvins and 14 different optics. It is rated at over 200,000 hours and IP67-rated against water and dust. 

Honeywell’s NS0031-82 two-stage LED floodlight produces 2,400-lumen security lighting when motion is detected. It includes hardware that mounts directly to a wall or pole. It has a die-cast aluminum construction with a titanium gray finish. It produces 400 lumens of accent lighting from dusk until dawn.

Milwaukee Tool’s M18 Rover dual-power floodlight is designed to fill large indoor and outdoor areas with 4,000 lumens of light. It features three different lighting modes and lights up a workspace for up to 12 hours at a time. The light head rotates 120 degrees to direct light in multiple orientations. The compact size and integrated handle allow for easy transport.

National Specialty Lighting’s CCT Adjust mini flood light is a wide-distribution flood in a small, discrete housing. It is listed for wet locations and can operate in temperatures between –4ºF and 122ºF. The beam angle is 150-by-120-degrees. Users can change the color temperature with the push of a button.

SLG Lighting’s FF G2 flood light comes in medium and large with a lumen output between 21,150 and 42,998. It has different mounting options (including square and round pole mount, wall mount and more), photocells and motion sensors for efficiency.

Lind Equipment’s 140W flood light generates light by two solid-state 70W LED integrated chips, which can endure shocks, vibrations and rough handling without breaking the LEDs. It is cool-running and safe to touch even when left operating for hours.

Lind Equipment’s XP1830 39W LED hazardous location floodlight features a wet location and nonsparking aluminum housing that can be used in a variety of hazardous locations and is listed for use in marine environments. It is explosion-proof and provides a wide, shadow-free flood of white light.

Lind Equipment’s 40W Infinity floodlight features multiple mounting options. A built-in, clickable attachment changes the lighting mount from a tripod to a floor stand to a magnet attachment. It measures 14 in. long and 41/2 in. wide and weighs 2 1/4 lbs. The outer shell is made of high-impact plastic.

Bell Outdoor’s LED swivel floodlight is designed for outdoor and wet locations. It features a locking-swivel joint for easy adjustment. The 1,200 lumen LED offers equivalent light to a 75W incandescent lamp while only using 13W. It features rugged die-cast aluminum construction.

Topaz’s flood light is designed for landscape lighting and is bright enough to illuminate building façades. It features a die cast aluminum housing with integrated thermal management and an impact-resistant polycarbonate optical lens. It also features a bronze knuckle mount and is availible in 70 or 90W.

Ring’s floodlight camera is a hardwired security camera with ultra-bright LED lights and a siren. It features two-way audio with noise cancellation. The camera has object and person detection. Also, there are dual sensors with object and person detection with ultra wide angle motion sensors that enable viewers to detect motion around corners.

ESL Vision’s high output flood light is designed for sports venues and industrial applications. It has a weathertight construction and impact-resistant polycarbonate lens. It is available in 300-, 600- and 900W models, delivering up to 117,000 lm. It rotates up to 70 degrees on its vertical axis.

Lind Equipment’s Beacon360 Trek Light LED flood light casts light 360 degrees and upward, illuminating up to 25 ft. in every direction. It is 8 in. long and 6.5 lbs. It can be purchased alone, mounted on a 4–6-ft. tripod, mounted on an aluminum floor stand, attached to a magnet, corded for daisy-chaining or with a high-strength adjustable clamp.

Orbit Industries’ LFL20 bullet flood light is designed for outdoor applications. It is available in 15W, 28W and 42W in both cool white and warm white color temperatures. Trunnion-mount or ¹/₂-in. adjustable knuckle-mount options are available. It has a UV-resistant, die-cast aluminum design and a lifespan of more than 50,000 hours.