iToolCo.’s PMK36 pole-mount puller kit features a one-man installation hook point, which eliminates the need for two people to install the puller on the pole. The kit works with cordless and corded 3,000 and 6,000 pullers. The wraparound and securement chain tightens and stabilizes the unit. The engagement teeth bite into the pole.

iTOOLco’s Cannon 10K wire puller can be changed quickly from side pulls to overhead or underground. The universal adapter sits on the conduit lock nut, fits a wide range of sizes and often eliminates the need to use the conduit adapters on lighter pull. There is an adjustable counter-balance for setup and a 15-lb. working weight.

iTOOLco’s Pull Slick Rope is a synthetic fiber wire-pulling rope with a high tensile strength of 39,000 lbs. It is made of 12-strand, single-braid synthetic fiber with ultra-low stretch. There are no organics in the rope, so it will not rot and does not absorb water. It is abrasion-resistant and has dual factory-installed pulling eyes on either end.

Toolco’s Cannon 6K wire puller is two wire pullers in one with dual capstans that can pull 8 and 28 ft. per minute on low speed and 20 and 70 ft. per minute on high speed. It can change from side pull to overhead, underground or truck hitch. It pulls out 9 ft. of extra wire; it maneuvers into tight spaces and no is anchoring required.

Rack-A-Tiers’ Penguin puller is designed to enable contractors and electricians to pull wire without taping or crimping. It has four slots and an Allen-key screw to attach the puller to the end of a wire. It also has a tapered, bullet-shaped end, which is designed to help pull wires through narrow passages. Two models are available—Penguin Puller Sr. for wires 3/0–350 MCM and the Penguin Puller Jr. for wires 1/0–4/0 MCM.