Current Tools’ 77SR electric bender bends ½- to 2-in. Rigid conduit. The removable handle enables dogleg bends, and the back rails protect the back of the bender and allows the bender to be used horizontally. The bending degree scale is easy for users to read for exact bends.

Current Tools’ electric bender for RIGID/EMT/IMC/PVC-coated shoe groups has a removable handle to allow for dogleg bends. It has simple, reliable electrical components and flat-free wheels. It is easy to maintain and service.

Greenlee’s aluminum hand bender head has cast-in, readable markings on the bender head and a finish for visibility in low-light. It has enlarged foot pedals and increased toe room to ensure greater control, stability and leverage. The bender handle has a big grip area, while still straight up and down for fast 30-degree bends.

iToolco.’s B2 rapid-fire bender accepts ó- to 2-in. EMT, IMC and Rigid conduit without the need to change shoes. It features a hydraulic load bar that easily locks conduit into the “ready to bend” position with the push of a button. The slide allows users to set the desired spring back once for the type of conduit and then move while keeping the previously determined spring back.

Southwire’s PB2000 2-in. power bender works in both the vertical and horizontal planes. It can be adjusted to ergonomic working heights. It has a 2-degree leveling adjustment and total lock casters. It includes freestanding conduit roller support.

Ideal Electrical’s built-in set-angle stopper stops the bender at desired angles, preventing over-bending. Clear, recessed markings wrap around the bender head for visibility, minimizing errors during in-air bends. Electricians can set the stopper to a wide range of common bending angles, including 10, 45, 60 and 90 degrees.

Southwire’s BSCC-01 bend station enables users to measure, bend, clamp and cut at a 36-in. work table height. It can store up to 700 ft. in conduit, and it has an extra shelf for tool and material storage. There are heavy-duty casters for mobility. It features a built-in 60-in. ruler and a speed vice designed specifically to hold conduit and Unistrut.

Current Tools’ 77SR electric bender bends ½- to 2-in. rigid conduit. There is a removable handle to allow for dogleg bends, and only one shoe and roller support is needed to bend ½ in. to 2 in. for each type of conduit.

Greenlee’s 881GX hydraulic bender features light follow bars, an extended yoke and spring pins for productivity and ergonomics. The large diameter reduces operator fatigue. All accessories are stored in ergonomic lifting positions. It fits through 32-in. doors and has raised fork pockets for balance and strapping points.

Greenlee’s 840AH aluminum hand bender features cast-in, readable markings on the head and a finish that provides visibility in low light. The bender head offers the power pedal feature with a foot area on the head for control and stability.

Jameson’s Bulldog Bender Pup features four tool sizes that cover a wide range of cable sizes up to 1,000 MCM. It provides power and leverage to easily install, bend and terminate cables. The pro handle with adapter bar allows left/right cable bends in tight electrical enclosures.

Greenlee’s aluminum hand-bender head with handle for ½-in. EMT features cast-in, readable markings on the bender’s head. It features enlarged foot pedals and increased toe room for control, stability and leverage. The handle is a consistent diameter, offering a bigger grip area, while it stays straight up and down for fast 30-degree bends.

Klein Tools’ 51606 ½-in. aluminum conduit bender features cast markings and symbols for fast conduit alignment to make all bend types, including saddle and back-to-back bends. The wide foot pedal provides stability, leverage and comfort, and the interior hook surface prevents conduit from rolling or twisting during bends.

Milwaukee Tool’s 1-in. aluminum conduit bender features high-contrast markings, and a reinforced hook and pedal provide added durability and a secure double-bolted handle that won’t loosen. It also features a wear-resistant chart integrated into the handle. Offset multipliers are featured on the shoe, while 30-, 45- and 60-degree center of saddle bend notches and a back of 90-degree bend indicator allow users to accurately bend conduit.

Current Tools’ 254P-252 hydraulic bender package features a bender, hydraulic pump and mobile bending station. It is designed to bend 2½- to 4-in. rigid/EMT/IMC conduit. It can be stored and moved on the 252 mobile bending station and is useful on the job site and in prefab shops.

Rack-A-Tiers’ Hoppy Bender features a “stop” attached to the bender head to create repeatable bends. Simplified multipliers are engraved into the bender for placing the “stop” prior to making offsets and four-point saddles. Special 22.5 and 45-degree marks engraved into the bender for placement of conduit bend marks and standard degree marks for stop placement are used together for bending three-point saddles without reversing the conduit in the shoe.

Southwire's conduit bender performs common bends such as stub-ups, offsets, back-to-back and saddle bends. The grooved hook prevents conduit from slipping, twisting or rolling when performing bends. 

Ideal Industries’ conduit bender is heat-treated to provide extra strength and reinforced at stress points for a longer life. The deeply serrated step helps prevent slippage when applying maximum leverage. The flat hook surface provides a stable starting point for the user, and the grooved internal hook surface also helps prevent the conduit from slipping. It features precision marks locating degree scale, star, arrow and rim notch.

Milwaukee Tool’s conduit bender has high-contrast markings, a reinforced hook and pedal and a secure double-bolted handle. It also has bending references and a wear-resistant reference chart. It is available in ¹/₂- and ³/₄-in. aluminum models and ¹/₂-, ³/₄- and 1-in. iron models.

Southwire Tools’ 1/2-in. EMT conduit bender performs common bends, such as stub-ups, offsets, back-to-backs and saddles. It has a cast-aluminum head with raised markings on both sides, 
a grooved hook, a large serrated step and a swaged-steel handle. 


Southwire’s PVC and thermoset plastic conduit bender features a textured, powder-coated exterior and a chrome-reflective interior for maximum return of energy, resulting in faster heating times. It also has 6-in. solid wheels, an indicator light to notify the user when the elements are on and a large instruction label that includes the NEC bending chart.