Petzl’s Vizen full-coverage, mesh face shield protects against projected objects, while still ensuring good visibility. Glasses can be worn under it. It pivots quickly from work position to storage position on top of the helmet.f

Magid’s Ergodyne Chill-Its 6650 hat with neck shade is made of Hi Cool moisture-management performance fabric. There is an absorbent terrycloth headband, wide-panel neck protection and adjustable cinch cord. It is available in hi-vis lime and hi-vis orange.

Enespro’s AirLite 12-cal vented lift front shroud eliminates needed CAT 2 balaclava. It is lined with FR control 2.0 antimicrobial fabric, and the OptiShield gray shields improves color recognition. There are auditory vents for improved sound and communication.

Brass Knuckle’s BKKN300 knee pads features a single strap with hook-and-loop closure that keeps the pads in place for hours. The broad straps eliminate pressure points and prevent bunching and slipping. The rugged, flat plastic caps create a steady footer for longterm kneeling projects. They have gel-injected foam padding to absorb impact, and the corner “glides” facilitate sliding and scooting.

Carhartt’s A09 duck nail apron is made with heavyweight firm-hand duck canvas. It has two utility loops on the strap and four large pockets to hold nails, screws and small hand tools. It features an adjustable length nylon belt with quick-release buckle and one pencil pocket, one small pocket and two tool loops.

Gateway Safety’s SoundOut II earmuffs feature three positions and an adjustable length, while the dielectric design provides versatility. Soft, extra-large cushions distribute pressure around the entire head for comfort. They are fully adjustable and can be worn over the head, behind the head or under the chin. They are independently tested to a noise reduction rating of 29.

HiVis Supply’s Blaklader 4316 Class 3 long raincoat is constructed from high-visibility, polyurethane-coated polyester with welded seams to keep the water out. It is combined with extra length, a buttoned drip edge and vented back for extra coverage and increased airflow. It has two outer pockets and adjustable sleeves and hood.

Buckingham’s Buckeye bucket hook with tether hole features an outside hook with a 2½-in. opening, two inside accessory hooks and a 3/4-in. inside opening. The inside hooks are designed for storing extra slings, blocks, tools and more. The tether connection eye allows for the tether to be attached for fall protection.

SeeHerWork’s SHW-U05-XS women’s fluorescent yellow-green, high-visibility, long-sleeve work shirt is self-drying and provides sun protection. It can be purchased with or without a heat-transfer vinyl logo and can be customized. With this shirt, wearers don’t need to wear heavy layers. It is ANSI/ISEA Class 3 compliant.

Enespro’s OptiShield vented lift-front shroud and hard hat is arc-rated at 20 cal/cm2. It is made of 13-oz. navy Westex UltraSoft fabric. The gray shield improves color recognition. It features anti-fog and abrasion-resistant coating and an easy-lift front face shield. Multiple vents improve air and auditory vents for improved sound and communication. It features a toric lens to reduce glare.

Klein Tools’ Tradesman Pro knee pad features five layers of impact-resistant material for protection and comfort. The single strap doesn’t bunch behind the leg and has a quick-fasten buckle. It has a protective outer shell with stabilizing nonslip surface, an inner fabric layer of neoprene, an oversized impact-absorbing gel layer and a molded polyurethane foam layer.

Workrite’s midweight, flame-resistant Excel Classic coverall has reflective trim and features five pockets for tools and side vents to keep users dry and comfortable. It has an arc rating of 11 cal/cm2. For closure, there is a taped brass breakaway zipper and a concealed snap at the neck. It is made of 100% cotton.

Enespro’s 40 Cal AirLite arc flash suit, made with lightweight fabrics, features the ActiveCool Venting underarm system and an elastic back waist. It has 26-in. leg zippers for easy access over boots. Its silver and yellow reflective tape provide visibility for search and rescue.

Cementex’s insulating rubber apron is designed for working on or around battery storage systems and for technicians who have to reach over energized conductors. It is made of reinforced Type II rubber and puncture- and tear-resistant fabric. It is flame-resistant and oil- and ozone-resistant.

Cementex UltraLite Series Arc Flash PPE Task Wear is designed to combine comfort with safety. The 11 cal/cm² UltraLite garments include a balaclava-hooded, long-sleeve t-shirt and simple high-waisted 12 cal/cm² pants, made to fit comfortably over daily-wear clothing. Kits, including gloves, a hardhat and clear faceshield, are available.

Enespro’s 40 Cal AirLite arc flash safety kit includes a jacket, bib overalls, OptiShield 3Phase 40 Cal flip-front gray hood, MSA V-Gard hard hat, safety glasses, silicone ear plugs and a gear bag.