Jameson Tools’ 24-42 tool bag has webbed handles, 13 outside pockets and two grommets for hooks. It features a reinforced base and sides to prevent sagging and water retention. It can be mounted using a polymer S-hook. 

Buckingham Manufacturing’s Buck Haul bag features metal buckles and snaps and an ergonomic back pad that easily removes for travel or storage. Climbing-spec webbing is used to reinforce all seams and wear points, and an inside mesh pocket provides extra storage. 

Greenlee’s 0158-28 crate cover tool organizer features 11 universal double-stitched pockets for tool storage and organization. The high-visibility reflective piping helps locate the tool bag in dark workspaces. A plastic molded handle and center alignment makes for balanced carrying. 

Hultafors’ tool bucket has an ergonomic design. It is made of PP-plastic material for carrying tools or necessities. The handle is comfortable and can be placed in an upright position to simplify the next lift of the tool bucket. It is stackable and equipped with a measuring scale on the inside. There are holes for attaching a shoulder strap.

Ideal Industries’ 13-in. Pro series large-mouth bag features a sturdy design that opens completely for ease of access to tools and equipment. There are 20 pockets and a hard protective phone/sunglasses case. It includes a shoulder strap, tape chain and tape measure clip. It is reinforced to hold itself open.

BOS Construction Solutions’ quick-build container can be used for indoor and outdoor environments. The wind- and weather-resistant unit comes in six sizes and can be used on any construction site. A secure tool and part storage can be assembled in minutes, moved by hoisting with a crane or lifting with a forklift. There are numerous accessories to increase security or help with organizing the contents.

Klein Tools’ hard-body aerial oval bucket contains 15 interior and 14 exterior pockets. It is made of rugged polyester and includes web handles. The black, molded polypropylene bottom has drain holes. It is designed to transfer tools safely and weighs 3 lbs.

Milwaukee Tool’s Packout three-drawer tool box features a locking security bar, an impact-resistant body and quick-adjust dividers for customization. The corners and locking point are reinforced with metal. There is a 50-lb. weight capacity, and it features internal organization and metal ball-bearing drawer slides.

Weather Guard’s 9893-7-01 three-hook cord tool holder is constructed of heavy-gauge steel and finished with a bright red powder coat. It works with storage racks to maximize floor space for work van equipment. It is 8 in. high, 9 in. wide and 4.5 in. deep. It mounts to end panels, bulkheads and shelves.

Southwire Tools’ electrician’s shoulder pouch features 16 tool-storage pockets and three carrying options: padded shoulder strap, tunnel loop for belt access and padded handle. It weighs 2 lbs. and is 12 in. tall and 8 1/2 in. wide. It also has an electrical tape strap and an adjustable hammer and flashlight loop. 

Klein Tools’ 12-in., water-resistant vinyl bucket is rated for loads up to 100 lbs. It has web handles, a swivel snap hook and a molded polypropylene bottom. It is available with or without a zipper-closing top.

Bosch’s L-Boxx 1A storage case is 4¹/₂-by-14-by-7¹/₂ in. and has 13 accessory inserts. It is part of the L-Boxx stackable tool-storage system, which features cases that interlock on the top and bottom. Each case is designed so users can gain access even when the boxes are stacked. Each case has handles on the sides and front and can lock with optional padlocks.