MagDaddy’s ½-in. 62450 magnetic clamp has a minimum strength of 15 lbs. The plastic is UV-rated, and there is no drilling or welding required. It can rotate 360 degrees and can be reused and repositioned. Wires can be taken in and out of the clamp quickly. 

3M’s cross-arm mounting bracket is a single clamp that offers firm holding. It is designed to mount molded rubber terminations and can be used in contaminated environments. It features a tongue for external attachments and is made of corrosion-resistant galvanized steel.

Utility Solutions’ Rex clamp is designed to control tails when using strap-hoist-type pulling devices. Users can engage the clamp’s rotating arm to provide positive lock to control a tail and keep the clamp in place. It features an ergonomic grip and is made from a UV-resistant polymer material.

HellermannTyton’s Quick2Clamp is made of impact-modified, heat- and UV-stabilized PA66 material that ensures long-term durability. It can be preinstalled on the conduit, bundle or the struts themselves.

Bridgeport Fittings’ Mighty-Bond Intersystem ground rod bridge clamp is designed for users to connect communications systems to the same electrical grounding electrode, rod or rebar using its four terminal points. It is available in two sizes: ¹/₂–⁵/₈-in. and ⁵/₈–³/₄-in.

Galvan Industries’ G-5 and SRC ground clamps are designed to comply with NEC 250.70. They are UL-listed for use with ¹/₂—³/₄-in. copper-coated, galvanized and stainless steel rods; ³/₄-in. galvanized rods; and sizes No. 4, No. 5 and No. 6 rebar, including direct burial in earth and concrete.

Hellermann Tyton’s Ratchet P-clamp adjustable wire, cable and hose clamp closes with an interlocking ratchet-style mechanism to custom fit the bundle. Four product sizes accommodate any bundle from ¹/₄–2 inches in diameter. It is available with a standard zinc-plated steel base and an upgraded version with a stainless-steel base plate.

Orbit Industries' saddle-type strut clamps fasten electrical conduit to overhead slotted channel or strut. Designed to hang EMT or rigid metal conduit from ¹/₂–4-in. trade sizes. It features a single slotted hex machine screw. 

Thomas & Betts’ cable tray combo clamp is designed to be the only clamp or expansion guide needed to install in any series of T&B cable tray. It keys into the rail flange on the clamp side when tightened while the guide side holds the tray more gently, allowing it to expand or contract.

Burndy’s copper Fastap parallel groove clamp has spring-loaded lineman assist and a duckbill handle. It can be side-loaded into a connector. 


Burndy’s BMCSS integrated bonding mid-clamp is made of corrosion-resistant 304 stainless steel. The down-turned points are designed to pierce the anodized coating of the module frame, so conductivity bonds the PV modules together.