Atkore’s UL Liquid-Tuff 6200 series liquidtight flexible steel conduit is designed for use as a raceway for power, control and communication cables in accordance with Article 350 of the NEC. It is sunlight-resistant, and it has a flame-retardant PVC jacket. It has a hot-dipped, zinc-galvanized, low-carbon steel core.

Atkore Type 316 stainless steel rigid conduit is polished with standard “brite” finish to increase corrosion resistance and aesthetic appearance. One coupling is included with each length purchased, and no special tools or processing are required for installation.

Atkore’s Epoxy system standard wall conduit is noncorrosive for use in harsh environments. It is nontoxic upon burning and is UV resistant. It has the mechanical durability of steel with the chemical durability of plastics, and there is no cable fusion due to dielectric properties.

Electri-Flex’s conduit is built for utility, power plant and steel mill installations. It provides durable wiring protection in harsh outdoor UV-exposed environments and extreme high- and low-temperature installations. It provides stability to keep systems running into the future.

Electri-Flex’s Liquatite flexible electrical conduit is made for data center installations. It physically protects wires and cables and and has flexibility to bend where wiring needs to go. Colored jacketing helps identify critical circuitry. It is a low-fire hazard solution, featuring self-extinguishing properties that enhance safety in enclosed spaces.

Penn Aluminum’s rigid elbow is made of UL Listed aluminum conduit, which is extruded using recycled, U.S. domestic aluminum billet. It is available in trade sizes of ½ in. through 6 in. and bends in sizes such as 45, 30 and 90 degrees. 

Penn Aluminum’s EMT is thin-walled and lightweight. There is a smooth internal surface from the extrusion process, with no weld line. It is available in sizes between ½ and 4 in. and is 100% recyclable and noncorrosive.

AutomationDirect’s Murrplastik two-piece flex split conduit provides an easy solution for routing preterminated cables, eliminating the need to dismantle/reassemble the installed connectors. It consists of dual overlapping tubes that are easy to open and provide mechanical protection and eliminate unintentional exposure of the cabling bundle inside.

Electri-Flex’s Liquatite nonmetallic food-grade conduit is liquidtight. It features an antimicrobial jacket that offers a wide temperature range, and it is made with a new food processing blue material. It is made of flexible PVC with a nylon reinforcing braid and is designed for continuous flexing applications. 

Calbrite’s Type 316 hygienic liquid-tight conduit is made of stainless steel and is helically wound for flexibility. The smooth, water-tight hygienic PVC coating features high compression strength up to 225 psi and is available in blue and white. It can be used in temperatures between 0°F and 275°F.

Champion Fiberglass’ Haz Duct XW type conduit can be used in hazardous, corrosive industrial environments. It is flame-resistant with low-smoke characteristics, offering solid performance in even the most volatile surroundings. The fiberglass duct will not melt or weld the wire to the inside of the conduit under fault conditions.

HellermannTyton’s HelaGuard Double-Slit corrugated conduit is a two-piece solution that features one semicircular tube that snaps over another to envelop a wire or cable bundle. This makes it possible to add flexible corrugated protection to wiring that is already connected on both ends. It allows installers to choose a narrow diameter, saving space in cramped applications.

Champion Fiberglass’ Champion Duct RTRC electrical wireway conduit can retain its shape after impact or compression. It can be used in environments such as utilities, wastewater treatment and more. The fiberglass duct will not melt or weld the wire to the inside of the conduit under fault conditions.