Hortilux’s HortiLED Top Explore grow light reduces start-up losses through learning effect and correct climate settings. Blue, green, red and far-red light can be individually adjusted in the software interfaces. It eliminates all possible differences between a laboratory setup and a real greenhouse environment.

Emergi-Lite’s JS series steel housing, emergency lighting battery unit is available in 6V and 12V models with up to 54W capacity. It features low-voltage disconnect, automatic brownout protection and center-to-center spacing of up to 100 feet. Heads are available in thermoplastic or decorative die-cast aluminum. 

Halco Lighting Technologies’ 150W SekTor area light has multiple mounting options. Applications include parking lots, garages and exterior light poles. It’s rated for wet locations, and it optimizes heat dissipation and thermal flow.

Cooper Lighting Solutions’ Neo-Ray Define series surface-mount luminaire is available in 2-, 3-, 4- and 5-in. housing sizes. Multiple lensing options include flush satin, drop, regressed and asymmetric. It has a 0–10V dimming standard and is available in 2,700K, 3,000K, 3,500K, 4,000K and 5,000K correlated color temperatures.

Innerscene’s Circadian Sky luminaire has the appearance of infinite clear blue and sunset skies, mimicking the look of a double-pane window with multiple surface reflections while preserving privacy. The CCT range of 2,200K to 40,000K captures the full range of natural daylight.

LightArt’s Clear Coil M2 is made of molecular recycling, which uses plastics unsuitable for mechanical recycling, such as synthetic fibers in clothing.

2nd Ave. Lighting’s 20-in. Pronograde Jack 8 243083 chandelier is a two-tiered architectural structure that features two crossbars with multiple arms embracing eight Edison-styled lamps. It can be used in residential and commercial applications such as offices and labs. It is UL and cUL listed for dry and damp locations.

RAB Lighting’s HAZSHARK hazardous location luminaire is available with an emergency battery backup that will operate for a minimum of 90 minutes. It is waterproof, vaporproof and corrosion-resistant, with a stainless steel housing and an impact-resistant polycarbonate lens.

Barron Lighting Group’s Growlite 300W LED grow light is designed for the early stages of plant growth, leafy greens and mother plants. The wide body design provides even light distribution. It is listed for damp locations and can be mounted in vertical racks or hanging applications. 

Barn Light Electric’s Milan cylinder gooseneck luminaire has slots cut into the shade to offer traces of uplighting. In comes in a variety of finish colors, gooseneck arm styles and sizes, along with slot options. It is handcrafted in the United States, and it can be used in wet locations.

Halco Lighting Technologies’ Edgelit 2x2 flat panel is an energy-efficient replacement for traditional lamps. Dimmable and easy to install, it has a 50,000-hour useful rated life. It is IP65 rated and can be used in office, retail, healthcare and other environments.

Eureka Lighting’s 4276DI-25 Frank ceiling-suspended luminaire has a triple aircraft cable configuration with level and height adjustment for easy accessibility. It has a laser-cut mounting plate with the light engine and felt shade mounted onto it. The diffuser is clipped on the internal reflector attached to the light engine. It is available in a variety of colors.

Current Lighting’s Compass 46T222 LED emergency light is damp-location rated and includes an emergency battery backup with 90 minutes of illumination. It can operate in temperatures from 68°F to 86°F. It is ceiling- or wall-mounted, and the lamp heads are adjustable. 

Ericson’s 1009-HAZ-60 hazardous location floodlight has a 120-degree beam angle. It is made with a copper-free aluminum enclosure and high vibration resistance. It works in temperatures between –40°F and 104°F. It is designed for locations that have high humidity and temperatures, such as distilleries and pumping stations.

Barn Light Electric’s Kao wall-mount luminaire is designed for tight spaces such as hallways, bathrooms, powder rooms, closets and stairways. It can be customized with more than 30 finish colors. It is rated for damp locations.

RAB Lighting’s C-WRAP linear luminaire has housing composed of biorenewable material that includes seashells, coffee chaff and recycled plastic. The lens and LED board gently drop down together, eliminating the need to remove the board while wiring. The soft rubber bumpers help keep it from damaging textured ceilings.

2nd Ave. Lighting’s 10-in. square Moroccan mini pendant is custom-crafted with an intricate design and decorative accents hand-finished in transparent copper. Height ranges from 23½  to 167 ½ in. as the chain adjusts. It is UL and cUL Listed for dry and damp locations, and can be used in environments such as islands, counters and more.

Westgate’s LEDTFX-2 LED emergency unit is wet-location-listed, with seamless silicon gaskets. It features an integral breather vent, two fully adjustable 1.5W LED heads and high-impact thermoplastic housing. It has 4W of remote capacity and can operate in a temperature range of 68°F to 122°F. 

Halco Lighting Technologies’ Sektor dusk to dawn outdoor luminaire is designed for applications such as walkways, parking areas, roadways and landscape lighting. It comes with a NEMA 3-pin photocell, which turns the luminaire off during daylight hours to save on energy costs and then on again during nighttime hours to provide the needed light.

Signify’s BloomBox luminaire focuses on environmentally conscious construction and eliminating waste with the modular, field-replaceable LED tray design and optics. It is rated for dry and damp locations in temperatures between 32ºF and 77ºF. 

AutomationDirect’s CCEA TrackAlpha-pro series 120V AC LED light bar is made of rugged industrial-grade anodized aluminum construction. It is designed for use with medium- to large-sized industrial machine tools and in wet environments. It comes with a standard bracket mount for angle adjustments.

Ericson’s 1007-XP-100 100W LED explosion-proof luminaire is designed for use in hazardous locations. It can be used in temperatures between –40ºF and 140ºF and has a 120-degree beam angle. It is made of copper-free aluminum and is high-vibration-resistant. 

Halco Lighting Technologies’ 120V ProLED color selectable downlight is listed for wet locations. It is made of steel housing with a white trim. It can be used in new construction or retrofit residential applications. It is color selectable in 2,700K, 3,000K, 3,500K, 4,000K and 5,000K options and has an average life of 50,000 hours.

Barron Lighting Group’s MQHB series mini LED linear high bay is available with multiple options including general or aisle lens distribution, integral battery backup and line cords. It features an IK08 rated optical lens and is supplied with a built-in sensor receptacle. It comes standard with 10-ft. aircraft mounting cables.

2nd Ave. Lighting’s 10-in. wide Elijah pendant is transitionally styled and cone-shaped. It can be placed across islands, bars, counters and tables. Custom styles, sizes and colors are available, as well as dimmable energy-efficient lamping options such as LED. It is UL and cUL Listed for damp and dry locations.

Aeon LED Lighting’s RGBA/RGBW LED stadium light delivers full-spectrum color floodlighting and is designed for indoor and outdoor use. It can be used for facade, architectural and sports lighting applications.

Emerson’s Appleton Retromaster series of LED luminaires for hazardous industrial areas requires no time-consuming rewiring or cutting of conduit, and it typically takes only a few minutes to install onto an existing mounting hood to reduce labor and material expenses. It is available in an output range from 1,000 to 5,000 lumens.

Landscape Forms’ Arne luminaire offers single, double and multiple lights mounted to a pole or arms in 4.5 m, 6 m, 8 m and 10 m pole heights. There are eight distribution types, including flood lighting and 18 and 36 LED configurations, 3,000K and 4,000K color temperatures, clear and diffused lenses and multiple drive currents. An optional shade accessory shields LEDs from direct view.

DW Windsor’s Knightsbridge luminaire is inspired by traditional Victorian designs, and it can be column- or bracket­-mounted to suit various applications and locations. It is handcrafted in corrosion-resistant copper and has a six-sided design. It is recommended for mounting at 4–8 m.

Optique Lighting’s Orbita Sconce I Nano Linear sconce LED luminaire features a 360-degree rotation to fine-tune the direction of the light in the field. It is available in 12-, 18- and 24-in. segmented lengths and with one or two segments. It can be mounted vertically or horizontally.

Isolite’s ELED architectural outdoor LED light provides 1,050 lumens and has a 50,000-hour lamp life. It is UL 924 listed for wet locations and is suitable for NEMA 4X applications. The cold-weather option can be used in outdoor applications to –4°F. A long-life, high-temperature nickel-cadmium battery maintains 90 minutes of emergency lighting, and brownout detection ensures emergency illumination during periods of low line voltage. 

Isolite’s LMIGN2 emergency light is compact and fully recessed. It features a universal (wall or ceiling) back box provided with fully adjustable mounting hardware to suit many applications.

Acclaim Lighting’s Linear XTR luminaire has internal circuitry and advanced power systems that allow for interconnection of up to 700 ft. of product and up to 1,400 ft. off of a single driver when controlled in group mode. It is available in multiple color temperatures of white or color-changing.

LightArt’s Blossom pendant is made of 1/8-in. 3form varia with translucent suede diffuser. It is dimmable with a 9.5W LED A19 Lamp. The canopy and dress plate mounts to a standard junction box and has an adjustable 24- to  96-in. suspension. 

LEDvance’s performance class backlit dual selectable and low-wattage panel is designed for offices, schools, hospitality and retail areas. With color selectability options (3,500K, 4,000K or 5,000K), users can customize the lighting. Backlit technology offers even lighting distribution without shadowing. It operates between –4°F to 122°F.

2nd Ave. Lighting’s 11-in.-wide Bola Cupla pendant has a height range from 16–45 in. due to the adjustable chain length for specific lighting application needs. It is UL and cUL listed for dry and damp locations. Custom colors, styles and sizes are available.

Edison Price Lighting’s Arachne luminaire has individual modules that can be assembled and arranged in numerous iterations with flexible legs, which allow users to create unique spider-like lighting structures. Each head offers 8W and delivers 1,620 lumens. 

Landscape Forms’ FGP area pedestrian light has a flower-like organic form created by three stems that rise from the connection with the pole. The soft, triangular head holds LEDs in triangular arrays that cast illumination between the verticals in a clean footprint.

DMF Lighting’s H series 120V 3½-in. cylinder luminaire has an integrated brightness switch that enables users to adjust the lumen output based on pendant height and illuminance needs. The decorative diffused trim allows for task illumination above countertops, desks and kitchen islands. It is listed for damp locations.

TCP’s QTL series high bay luminaire has a lightweight extruded aluminum body and includes mounting hardware. It has a standard frosted lens for glare control and no shadows for smooth lighting. It is damp location rated and has a 50,000-hour rated life. There is a wide 160-degree field angle beam spread that reduces the cave effect.

Barron Lighting Group’s 120V DDX series surface mount LED downlight provides project flexibility with field-selectable color temperature: 2,700K, 3,000K, 3,500K, 4,000K and 5,000K CCT. It offers 960 lumens and includes a snap-on mounting bracket for installation directly to a junction box. 

Barn Light Electric’s Venice cylinder pendant luminaire is manufactured and hand-crafted in the United States. The shade is constructed entirely from commercial-grade materials. It can be cord-hung, stem-mounted and chain-hung. It is made to order.

Modern Forms’ 120/277V, 50/60 Hz Bloom chandelier extends and retracts mechanically from 32 to 42 in. It spins on a round canopy with minimal hardware and can be mounted on a sloped ceiling. Thin powered aircraft cables provide an adjustable suspension height.

Optique Lighting’s Nano linear luminaire is shipped in customized lengths to meet exact project specifications. The design features include precision metal end caps with countersunk hardware and grommets preventing light leaks. It is offered in over 10 lumen output packages for indoor and outdoor applications. 

LuxxBox’s Georgina acoustic luminaire has a lampshade with a soft texture and a flowing crisscross pattern. The acoustic shade is manufactured from recycled materials and is fully recyclable at the end of life. There is a 0.1% dimming option. 

Orbit Industries’ LEDLTS series temporary work light is listed for damp locations. It has a stainless steel cage and hook for durability, a 10-ft. male plug cord and hidden socket. It operates in temperatures between –40°F to 140°F. The beam angle is 313 degrees.

PRIZM by American Lighting’s NeoFlux 360 flexible linear LED neon luminaire can be used in indoor and outdoor environments. It has a 0.98 in. diameter and a bending radius of 200 mm. It has a sealed silicone jacket that is UV-, flame-, saltwater-, yellowing- and cracking-resistant. 

Orbit Industries’ EL2LR recessed LED emergency light features dual-voltage input and two fully adjustable 1W LED lamp heads. It offers a minimum of 90 minutes of emergency operation and a push-to-test switch.

Landscape Forms’ Motive area light is available with a clear or diffused lens. Poles are 10 and 12 ft. high and taper from 4 in. at the base to 3 in. at the top. The fixture is 18 ft. in diameter. The dimmable light is offered in 2,700K, 3,000K, 3,500K and 4,000K temperatures, and it is UL-listed.

RAB Lighting’s X34-450SF floodlight has a 50,000-hour LED light span. It is suitable for wet locations, and the color temperature is selectable by 3,000K, 4,000K and 5,000K. The lens is tempered glass and has an ingress protection rating of IP66 for dust and water. 

TCP’s green spectrum LED horticulture vapor-tight luminaire is designed for working in grow rooms at night without disrupting plants. It is IP65 wet-location-rated, available in 2- or 4-ft. lengths and in a 10W, 20W or 40W power package. 

Liteline’s 3½-in. Luna fire-rated fixture meets safety and building construction requirements granting inherent 2-hour fire-rated protection. It is recommended to be used with fire-rated caulking around the trim for a complete fire-rated barrier.

Isolite’s ELF flush-mounted architectural emergency light features 4 integrated 1W LED heads that produce bright lights. The LEDs are adjustable and allow up to 50 ft. of light spacing. It is available in textured white and black finishes.

Amerlux’s Aerus luminaire provides direct/indirect illumination and anidolic optics for comfort and productivity in commercial and institutional settings. It has low-voltage aircraft cable that supplies power to the fixture without a visual power feed. It is available in 3,000K and 5,000K CCT.

Landscape Forms’ Leo area light features multiple distributions and outputs for visual comfort and performance. It fits a variety of site designs and architectural styles, and features a 19-in. diameter housing. It is available with single, dual and staggered configurations; 12-, 16-, 20- and 25-ft. pole heights; and a clear or diffused lens.

Tweener’s LED court lighting system mounts to the existing fence posts on tennis and pickleball courts. It provides uniform coverage and has an available dimmer switch. It produces minimal light pollution.

Landscape Forms’ CQ700 Typology ring luminaire is perched on an aluminum mast and is a circular strip of LEDs that creates a solid ring of ambient light. It is UL listed for wet locations and International Dark Sky approved. It is available in 2,700K, 3,000K, 3,500K and 4,000K.

Emerson’s Appleton luminaire is designed for low mounting heights in harsh industrial areas or where fixture weight must be minimized. The luminaire lid includes an IP-68 cord grip for applications where water is present in the conduit to prevent water ingress into the fixture.

LightArt’s Marina pendant luminaire blends a mix of reclaimed ocean plastic to create a blue-greenish hue similar to sea glass. It is 3D-printed and made from 100% recycled polypropylene sourced from ocean-bound and nearshore waste.

Bruck Lighting’s Renata wall luminaire is designed, handcrafted and painted in Argentina. It is made of recycled, locally sourced wood and comes in six wood stains and 11 colors. The natural lamb’s wool acoustic material is NRC-rated for absorption efficiency.

Landscape Forms’ Gunnar LED luminaire can be wall-, catenary- or pole-mounted in a variety of heights with up to six projectors per single pole. It is made of an extruded aluminum body construction with a tempered glass diffuser lens and a threaded weatherproof cord grip.

Landscape Forms’ Ashbery area light is designed for pedestrian spaces such as campuses, parks and plazas. Options include single or dual configurations with 12-, 14- and 16-ft. pole heights. The glare control requires less eye adaptation, enabling lower light levels and lower energy use.

Liteline’s FLX15 LED luminaire outputs 1,480 lumens and has a sharp cylindrical body with no visible heat sink. It is designed for use in residential and retail lighting. The lens options are available in 15-, 25-, 40- and 60-degree beam spreads. 

LEDvance’s 25W LED office luminaire can be installed in ceilings or suspended. It is available in lengths of 0.6 m and 1.2 m, and the dimmable version features three-stage click and dim through a wall switch. It offers a lifespan of up to 30,000 hours.

Automation Direct’s OPT2418 5,700K Wenglor TPL series flat light is used for backlighting and is available in sizes from 200 x 200 mm to 400 x 400 mm. Backlighting is used for applications such as quality control to detect presence or absence, edge defects, fill level and silhouetting.

Landscape Forms’ Torres area light is available in two sizes, 36 and 56 LED configurations, and with four light outputs, two drive currents, three distributions and a clear or diffused lens for a variety of applications. Single and dual luminaires mount on 12-, 16-, 20- and 25-ft. pole heights. Luminaires mount at any height along the pole.

Jameson’s 31-1325E Stubby heavy-duty fluorescent work light features a shock-absorbing handle and end cap. There is a shatterproof tube for durability. The high-visibility power cord measures 50 ft. and features a patented floating bulb socket for protection. It meets specifications for water resistance.

Ericson’s 1006-LED-100 work light can be used in commercial and industrial applications such as warehouse and storage spaces. It is rated for damp locations and has a cable length of 5 ft. It features a stainless-steel guard for impact protection and 6,000V surge protection. The color temperature is 5,000K.

Liteline’s Moon Puck luminaire has a low profile for recessed or surface-mount applications. It is designed for areas such as under kitchen cabinets or millwork applications such as a bookshelf to illuminate items on the shelf. Users can link multiple fixtures together for a faster installation. It operates in temperatures between –4°F and 104°F.

Barn Light Electric’s Drum LED schoolhouse sconce is available in 850 or 1,250 lumens. It operates in temperatures between –22ºF and 104ºF. Users can choose between opaque or clear glass shades, and it can be used in damp locations. It is made to order and the fitter is handspun.

LEDvance’s grow light is designed for greenhouses and vertical farms because it replaces natural light and helps promote plant growth. It looks white to the eyes and is interconnectable with up to four luminaires in 480W. It operates in temperatures between –40ºF and 133ºF.

DMF Lighting’s X series 3-in. cylinder luminaire can be surface-, pendant-, wall-mounted and more. Available color temperatures include 2,700K, 3,000K, 3,500K and 4,000K. It is suitable for wet locations. If used as a spotlight, the beam spread is 25 degrees.

Liteline’s 6-in. shade mini is a 13W round downlight for retrofit applications into existing 6-in. recessed housings or octagon box. It can be used in wet locations, and the durable airtight aluminum body has a twist-and-lock, two-tone, dead front trim/baffle.

Landscape Forms’ 100V–277V 50/60 Hz Torres wall-mount luminaire features an LED array that provides directed, warm white light with visibility to extend the safe use of outdoor spaces. It is International Dark-Sky Association approved and is available in two sizes, with single or dual luminaires.

Halco Lighting Technologies’ 120–277V AC ProLED luminaire features prewired, nonshunted sockets for Type B double-ended LED T8 tubes. It is UL-listed for damp and dry locations. Mounting options include V hook, surface and suspended. It is available in 2-, 4- and 8-ft. options.

TCP’s 36W LED round pendant luminaire uses edge-lit technology to deliver full panel diffusion and uniformity. Applications include ceilings in offices, schools, retail locations, healthcare, hospitality and other commercial locations.

TCP’s LED slim flush-mount luminaire can be used for new construction or retrofit projects. It is color-selectable and comes with multiple color trim options. It is available in 7-, 9- and 12-in. options. It operates in temperatures between –22°F and 104°F and can be used in commercial, retail, residential and industrial applications.

Isolite’s NEMA 12 27–140W emergency light is designed for use in hazardous indoor applications where there is dust, dirt, lint, dripping water or condensation. It is made with a 20-gauge steel cabinet with full welded corners.

Net Zero USA’s germicidal 253.7 nonionizing UV-C upper-room luminaire deactivates airborne viruses and bacteria, and it is designed to operate 24/7 in occupied spaces. It produces no ozone or other contaminants. The housing is lightweight aluminum with a reflective interior.

Alloy LED’s Radialux neon 100 SB RGBW LED tape lights feature a tight bend radius available in top- and side-bending designs to mimic the curves of traditional neon lights. With lengths up to 16.4 ft., the fully encased, rugged silicone housing is IP67 wet location rated, satisfying indoor and outdoor applications.

Emerson’s Appleton Baymaster high-bay luminaire is resistant to corrosion, vibration, surges, thermal shock and moisture. Mounting hoods and bodies are forged from copper-free aluminum. It can be used in hazardous areas where flammable gases and vapors, dirt, dust, severe weather conditions and high temperatures are encountered.

Acclaim Lighting’s Linear XTR luminaire allows for interconnection of up to 700 ft. of product and up to 1,400 ft. off of a single driver when controlled in group mode. Available in multiple color temperatures of white or color-changing, it is designed for applications where long-distance runs are desired.

Modern Forms’ 120V AC Marimba chandelier features aircraft cable power lines and silk screen LED light emitters. It can be used in residential, commercial and hospitality spaces. It is rated for 54,000 hours and has a twist-lock opal glass diffuser for easy removal. 

American Lighting’s Spektrum 12V AC low-voltage LED neon tape light is flexible. It is designed for direct and indirect lighting applications, including residential, entertainment and hospitality. It features RGBW color-changing capabilities and a diffused neon-like glow.

Current Lighting’s Litecontrol LED ring pendant is made with extruded aluminum, providing a minimalistic form to house an internal flexible LED source. A recessed J-box with a die-cast aluminum canopy interface allows installation from below the ceiling surface. The canopy cover is flush-mounted for a seamless transition into the ceiling plane.

Barron Lighting Group’s SLS series luminaire comes in 2-, 4- and 8-in. options. It is color switchable between 3,500K, 4,000K and 5,000K. It is offered with integral battery backup, an integral multilevel dimming sensor installed behind the lens and linkable accessories. It is designed for indoor environments such as schools and hospitals.

Above All Lighting’s Vicky acoustic luminaire is a ring-style light with an LED light source from its inner surface. It is available in sizes ranging from 23.6 in. to 59 in. in diameter. It features aluminum body construction and an optional acoustic system that maximizes surface area to absorb sound waves.

Access Fixtures’ APTI-V 450 LED floodlight is a commercial and industrial sports light. It includes a slip-fitter mount for mounting flexibility. It is available in five Kelvins and 14 different optics. It is rated at over 200,000 hours and IP67-rated against water and dust. 

Luxxbox’s Dasch LED acoustic luminaire absorbs noise. It is designed to hang in corridors, hallways or above desks. It is available in four lengths and a range of colors. It has height-adjustable suspension cables.

2nd Ave. Lighting’s Cretella chandelier features up to six curvaceous tiers, embracing up to 108 cream fluted glass shades. The frame and hardware are in a solar black finish. It is listed for dry and damp locations, and the suspension chain length can be adjusted.

SLG Lighting’s TR surface wraparound Gen 2 luminaire features a curved diffuser that provides even light distribution. It is available in 3,500K, 4,000K and 5,000K color temperatures and can be used in applications such as commercial and retail spaces. It is designed to work in temperatures between –4°F and 113°F.

Acuity Brands’ LED Aberdale flush-mount sconce is available in three shades and features a white acrylic diffuser with a cleanable linen fabric overlay. It is designed for spaces such as residences, hotels and restaurants. It is suitable for damp locations.

Focus Industries’ 12V SL15PS2L12BRS brass starlight cylinder pendant features a 3-in. brass canopy with a frosted acrylic accent and a 12-in. stem. It is rated for 50,000 hours, and the socket is a single-contact BA15S bayonet base.

Leviton’s 8-in. LED downlight with motion sensor features an automatic on/off occupancy sensor—no wall switch is required. It is available in 3,000K, 4,000K and 5,000K adjustable nondimming color temperatures. It is suitable for damp locations. 

LightArt’s coil seagrass luminaire is a teardrop-shaped fixture in a deep green hue that resembles the flowering plants that grow in marine environments. It is made of 100% recycled plastic, including near-shore plastic recovered from fishing nets, trawls and ropes. It is designed for dry and damp locations and for indoor use only.

Landscape Forms’ Tumbler outdoor luminaire has two power outputs and several symmetric and asymmetric distribution types for multiple applications. It offers single, double and multiple luminaires mounted to 3.4 m, 4.2 m, 5 m and 6.6 m high poles. It has 3,000K and 4,000K color temperatures, clear and diffused glass lens and full cutoff.

Eureka’s 4232-23 Quadrant pendant luminaire is suspended on a clear power cable with standard or slim magnetic canopy. The shade is composed of two rigid, interlocked, sound-absorbing panels for acoustics. It is made from synthetic felt composed of recyclable polyethylene fibers that are formaldehyde-free, non-irritant and odorless. 

Environmental Lights’ RGB PixelControl LED neon light is low-maintenance, durable, flexible, energy-efficient and bright. It has the ability to produce millions of colors, using LED technology to simulate the look of a traditional neon light. It can be used for commercial, studio, architectural and decorative purposes.

Cooper Lighting Solutions’ 235 PrentaLux Decorative 3D printed luminaire features an outer shade with three textures options and inner shade with three different texture options. It is available in 2,700K, 3,000K, 3,500K and 4,000K. The mounting canopy is 3D printed and available in a disk or conical shape.

Barn Light Electric’s Loma chain-hung pendant luminaire is available in 28- or 36-in. sizes and can be used in damp locations. Users can select from two separate finishes and oversized shade sizes hand-spun from solid metals to create a unique design.

TCP’s QTL Aisle lighter is a lightweight and durable LED strip with an attached driver. It is v-shaped with a 144-degree light spread. It is dimmable and features daisy-chain wiring for easy installation. There is a reduced cave effect due to the uplighting.

Barron Lighting Group’s LRP series emergency luminaire has thermoplastic housing and fully adjustable tungsten lamp heads. It is UL-listed for 90 minutes of emergency run time with 24 hours of recharge time.

Modern Forms’ PD-92927 120–277V, 50–60 Hz Stormy LED luminaire is adaptable to sloped ceilings, and users can hang it straight and swivel it up to 90 degrees. The wands are crafted of seeded acrylic embrace fashionable hardware.

Leviton’s Viscor LRTH-DFX luminaire combines a single shallow semi-round lens and 365DisInFx UV-A technology to help reduce bacterial and fungal growth on surfaces. It is a low-profile luminaire designed for applications in spaces such as offices, retail stores and more.

TCP’s Polar Bay full-body assembly accommodates T8 or T5 lamps. The diffuser and upper components are locked by retaining latches, which ensures a tight seal. It is designed for harsh environments where humidity or moisture is present.

American Lighting’s high-output COB tape light has uniform illumination without the need for additional diffused covers or accessories. It is a useful solution for areas with low clearance or reflective surfaces to eliminate all dotting or spot-glare effects.

TCP’s 120/277V LED thermoplastic emergency luminaire features a chrome-plated metalized reflector and polycarbonate lens for light distribution. The adjustable LED lamp heads increase center-to-center spacing with 8 LEDs in each lamp head. It is designed for a wall or ceiling mount.

2nd Ave. Lighting’s Arendal chandelier features four white textrene shades that crown complementary faux candlelights on bobeches. It is 42 in. wide, and the overall height ranges from 55–133 in. with a chain length that can be adjusted in the field. It is designed for illuminating residential, hospitality and commercial spaces.

TCP’s 100W, 120/277V AC horticulture LED vapor light features a lightweight design to support the flowering and growth stages of plant development. It features durable lightweight plastic housing. It operates in temperatures between –40°F and 122°F. It has a life of 50,000 hours and is rated for wet locations.

Isolite’s 360W ELH emergency luminaire can power multiple remote heads. The locking twist-collar securely holds the lens for quick and easy relamping, and brownout detection ensures emergency operation during periods of low line voltage.

Barron Lighting Group’s QMS series emergency luminaire features adjustable square heads and is designed for commercial areas. It is suitable for damp locations and can be mounted on the wall or ceiling. It operates in temperatures between 32°F and 112°F.

Sylvania’s 23W Smart+ ZigBee 15-in. flush-mount luminaire is controlled by smartphone, tablet and voice integration. It is compatible with major smart home automation systems, and users can create schedules and light scenes. The color temperature is tunable between 2,700–6,500K.

Orbit Industries’ EL2NM-LED 120/277V AC micro adjustable square head LED emergency light features 90-min. minimum emergency operation and a universal mounting plate with quick-connect. It is suitable for damp locations and can be mounted on the wall or ceiling. There is a conduit mount knockout on top of the housing, which is made of high-impact thermoplastic.

TCP’s HB series LED linear high bay luminaire operates in temperatures between –4°F and 122°F. It is rated for damp locations. It features a standard frosted lens for glare control, a post-painted steel frame with no scalloping and pop-riveted and rounded-edge corners. The wide beam spread due to angled LED design provides a clean cut off.

LumenFocus’s GLS germicidal luminaire provides pathogen eradication in unoccupied rooms. It can be installed in a recessed grid ceiling or surface-mounted. It is capable of inactivating more than 99% of all bacteria and viruses. A reverse occupancy sensor powers off the unit when a person is detected in the occupancy zone.

Acclaim Lighting’s IN11421AG Elizabeth five-light luminaire has an installed weight of 31.85 lbs. The finish is antique gold, and the bulb is 5–60W candelabra. It is 18-in. wide by 34-in. high. The wire is 12 ft. long, and the chain is 5 ft. long. It is designed for dry locations, and the shade is made of curved, clear glass.

LumenArt’s XVP Designer pendant luminaire is made of wood and corn resin. It is biodegradable, compostable and recyclable. It can be hung vertically or horizontally, and it is available in black, satin nickel, polished nickel and bronze finishes.

Barn Lighting Electric’s Chateau gooseneck luminaire is designed for indoor and outdoor applications. The maximum wattage for a standard incandescent is 200W. It is listed for wet locations. The shade is handspun and made from high purity 0.050-in. 3003-O tempered aluminum. The shade and arm are available in a variety of colors.

Eureka Lighting’s 74700D-5 Switch series features Arm quantity and stem lengths that can be specified to create fixtures as big as required, with the individual arms installed to provide direct or indirect light. Each arm has its own precision balance control, and arms have 350-degree rotation. Each arm conceals a custom-designed LED module.

Barron Lighting Group’s Varius LED series 90W linear grow luminaire has broad-spectrum white LED with spectral performance designed for flowering and fruiting cycles. It features a prewired, onboard driver and quick-connect cable system. It operates in temperatures between –4°F and 104°F. It comes with optional mounting frame that offers customizable spacing and spectrum blending.

2nd Ave. Lighting’s 25W 10-in.-wide Chronos 2 wall sconce is Inspired by a modern hourglass and has dual trumpet styled shades in a custom blue idalight. Custom sizes, finishes and diffuser colors are available. The height is 17 in., and the width is 10 in. It is listed for dry and damp locations.

Focal Point’s Ori luminaire is a sound absorbing, 2-by-2 tile that fits in a 9/16- or 15/16-in. grid ceiling. It is cut and folded, not thermoformed, for defined edges. It features eco-friendly technology to maximize sound absorption and reduce ecological impact. The acoustic housing material is made of 100% polyester with up to 50% of recycled plastic bottles.

Modern Forms’ Groovy luminaire reduces echo and noise pollution from crowds. It is a rigid acrylic structure wrapped in a double layer of acoustic felt available in three two-tone color combinations. It features an aluminum hardware and mouth-blown, etched opal glass. It is rated for 50,000 hours. The universal voltage driver installs within a junction box.

Sylvania’s Manchester pendant luminaire features a clear glass shade for a retro industrial look. It features a 4.7-in. diameter canopy and a 42-in. cord. It is designed to operate through the 120V AC. The luminaire canopy mounts to recessed outlet box, and it is designed for commercial and residential applications.

WAC Lighting’s Atlas series LED pendant luminaire produces up to 3,000 lumens from the 50-in. model. It is also available in 30- and 40-in. models. The black finish provides a contrast with the lines of light while the cube profiles rotate independently for display options.

Barron Lighting Group’s JJL series vapor-tight jelly jar LED features an adjustable knuckle that enables the unit to rotate from 0 to 90 degrees, which allows it to be mounted to a ceiling or wall. There are conduit entry points on four sides and on the back of the unit. It features a sturdy, die-cast aluminum enclosure with a strong steel wire guard and polycarbonate globe for durability.

Ridgid’s GEN5X 18V hybrid upright area light is designed to self-correct into an upright position when knocked over. There is a battery door for keeping dirt and debris out of the battery port. It puts out 1,000 lumens in all directions. On the lowest setting, it can run multiple days on a single 5 Ah battery charge and can be plugged into an outlet.

LumenFocus’s UVFocus germicidal luminaire has a pendant-mounted and sconce option. It is designed for applications such as lobbies, hallways, offices and more. These fixtures use low-wattage, ozone-free GUVT8 lamps that reduce airborne pathogens. Relamping these fixtures is simple and quick. For safety, a red light indicates power to the ballast, and a green light indicates the lamp is running.

Orbit Industries’ round LED high-bay luminaire is designed to replace up to 1,000-watt HID fixtures, and it is available in 120–277V or 277–480V inputs. Each model includes a ½-in. fixture hook and built-in safety-restraint cable. It Includes a 0–10V dimmable driver.

Barron Lighting Group’s 120/277V AC LRP thermoplastic series emergency luminaire features an injection-molded UL 94 5VA flame-retardant, high-temperature thermoplastic housing. It features fully adjustable, high-intensity tungsten lamp heads with 7.2W for 6V options and 9W for 12V options. It operates in temperatures between 59°F and 104°F for a minimum of 90 minutes during a loss of power with a 24-hour battery recharge time.

Topaz’s 17150LEDP2 150W temporary high-bay fixture is vibration-, shock- and impact-resistant. It has a corrosion resistant, heavy duty cage, and its own self-locking hook doubles as a carrying handle. It weighs less than 6 lbs. and works in temperatures between –22°F and 140°F.

Sylvania’s ValueLED garage luminaire from Ledvance is offered in three wattages/lumen packages. The internal CCT selectable switch provides the choice of 3,000K, 4,000K or 5,000K. It features an optional dual-function motion and daylight sensor. It is designed for use in garages and canopies or as mid-bay general lighting.

Barron Lighting Group’s 120/277V LED-90 series thermoplastic lighting unit features fully adjustable heads with 1.1W per head. It is suitable for damp locations. The low-voltage disconnect eliminates deep discharge.

ABB’s Hazlux 5 explosion-proof luminaire is designed for marine, wet and hazardous locations and has five mounting styles. It has a thermal, shock-resistant glass globe, and the polymeric reflectors are available in standard dome and 30-degree angle versions.

Barron Lighting Group’s 120/277V AC LED-95 series thermoplastic emergency lighting unit is suitable for damp locations. It has a remote capability of 2.4W for 90 minutes. The fully adjustable heads provide path of egress for any commercial application. The 1.5W LED lamp heads deliver up to 25 ft. spacing.

Sylvania’s Lincoln 120V AC dimmable luminaire mounts to a recessed outlet box and is made of post-painted aluminum with seeded or clear glass shade. The canopy diameter is 4.5 in. 

 Lind Equipment’s Beacon LED tower luminaire can be used as a generator, no-glare diffuser and as an electric-powered light tower. The light heads are weatherproof, wet-location-rated and fit through doors. It also has clip-on diffuser frames. Each frame attaches and detaches to the light head in under 1 minute. It can operate quietly without any fumes from an external power source and works indoors.

Barron Lighting Group’s GLE-GL LED horticultural luminaire is designed for safely illuminating the dark cycle when growing short-day plants. It is also available with 90-minute battery backup to provide plant-safe egress lighting for grow facilities without disrupting critical photoperiod times. 

Eureka’s Hex interior luminaire is available in three mounting types: suspended, ceiling and wall. The frosted acrylic diffuser reduces glare and has a sound-absorbing panel option. The diffuser is replaced with a high-density polyester felt panel that absorbs sound to reduce ambient noise. It is available in 23.4- and 36.5-in. sizes.

Sylvania’s Lowell 120V AC cage pendant light is dimmable and designed for commercial and residential applications. It features a 42-in. adjustable cord with rubber coating. The shade is clear glass and is available in black.

SLG Lighting’s Sparta sports luminaire features a designed thermal management system that efficiently dissipates heat. It is designed for use in temperatures between –40°F and 122°F. It is available in 380–820W versions that deliver 50,000–105,000 lumens.

WAC Landscape Lighting’s Hardscape Series LED luminaire offers an output ranging from 50 to 350 lumens. It can mount on walls and countertops in all orientations. It is available in lengths from 3 to 18 in.

Milwaukee Tool’s stand-up, portable tower luminaire has a maximum height of 7 ft. and collapses to less than 4 ft. The multidirectional light head enables users to orient the three independently pivoting heads to cast light in several directions.  

Modern Forms’ 120–277V Isotope luminaire features rotatable arms that adjust for customization and full-range dimming. It is available in a black finish and three sizes.

Acclaim Lighting’s Mystere pendant luminaire’s clear dimpled, glass shade is finished in a polished chrome. It is dimmable and measures 16 in. in diameter and
81/2 in. high. The weight is 81/2 lbs. The cord is silver.

WAC Lighting’s 120V AC Orbit chandelier delivers 4,750 lumens and can be mounted on a sloped ceiling. It features two adjustable orbital designed light bands for various display options, and the driver is concealed in the canopy. It is available in two finishes. It is constructed of an aluminum body with an acrylic diffuser.

2nd Ave Lighting’s Pronograde luminaire is semi-flush mount and features a crossbar with four arms embracing 60W bulbs. The frame and hardware are finished in a satin brass. It is designed for damp and dry locations. It is 32-in. wide, 32-in. long and 15-in. high. It is handmade and customed made.

LumenArt’s 120V XKP pendant luminaire is made of
wood and corn resin, and it is recyclable and biodegradable. It is suspended on a 72-in. cord in black, white or metal braids.

Eureka Lighting’s Snowlab luminaire, and it is ceiling- suspended and an interpretation
of a glass bell. It is made of a die-cast steel structure and a chrome-plated finish. It is dimmable and available in translucent chrome
or gold blown glass.

Hylite’s AEON sports light is designed for indoor and outdoor use. It is fully enclosed to protect electronic components from exposure, but it allows for continuous airflow to keep the components cool. It is suitable for use in corrosive conditions and available in
five lumen and voltage packages.  

Sylvania’s Essex 120V AC semi-flush-mount luminaire is dimmable and made of seeded glass and metal detailing. It ships with an LED filament bulb. It is designed for use in commercial and residential environments. It has a 5-in. canopy.

Focal Point’s Seem 1 Acoustic Trio is a Y-shaped, sound-absorbing pendant luminaire. The housing is made of 100% polyester containing up to 50% recycled plastic bottles. It is available in 4- and 6-ft. diameters with direct and indirect light distributions.
It offers lumens of up to 4,800 direct and 7,200 indirect.

Focal Point’s Theory luminaire’s elliptical form allows LEDs to be integrated inside while outside surfaces are illuminated independently. Drivers are tucked above the ceiling and an acrylic light guide draws light around the luminaire’s body.

Contech Lighting’s Mini Stealth wall wash/flood luminaire features lockable precision aiming adjustment and 360-degree aiming horizontal and 360-degree vertical rotation. It delivers up to 3,500 lumens, and the cast and finned aluminum heatsink is thermally engineered to provide optimal heat dissipation to ensure long life.

Lind Equipment’s 15W LED battery-operated hornet light is 6-in. and features a 180-degree rotatable bracket. It runs for 3 hours on full power, 6 hours on low power and operates while charging. It features three rechargeable alternatives and an option to charge a cellphone with the light’s battery while it continues to run.

Sylvania’s ValueLED UFO high-bay luminaire is lightweight, impact-resistant and offers up to 78% energy savings compared to traditional luminaires. It is designed for warehouses, gymnasiums and other industrial application projects. It features pendant, loop or surface-mounting options.

Sun Valley Lighting’s Mozart LED outdoor luminaire is available with smooth and fluted aluminum risers and includes complimentary base covers. The crown, arms and hub are welded to create a one-piece, unitized housing. A variety of options can be specified, such as house-side shielding, high-low dimming and photo cells.

Orion Energy Systems’ Harris, LED high-bay luminaire provides flexibility by enabling users to change the fixture’s light output with just a few adjustments. It is designed for use in low- and high-bay environments and

Hilti’s SL 6-A22 cordless 22V LED site luminaire features a rotating head and integrated mounting options for illumination of medium to large work areas. It produces 3,000 lumens. The foot and base design allows for hanging or mounting from a variety of job site surfaces. It is designed to be used in confined spaces. It also features three brightness modes.

Emerson’s LED luminaire combines the solid-state technology with lighting patterns of traditional incandescent fixtures. It is designed to operate in the presence of ignitable gases, vapors or dusts. The fixture is equally suitable for coastal locations and other wet environments

Nora Lighting’s Opal series luminaire is offered in 4-, 6- and 8-in. models. It is offered from 2,700–5,000K color temperatures, and finishes include bronze, natural metal and white. It is dimmable and is rated for use in wet environments.

Lind Equipment’s wide- area LED cart light comes with a single, double or tripod head. The cart uses 200W of energy usage per light. However, it puts out the same amount of usable light as a 1,000W metal halide. It is weatherproof and impact-resistant.

Eureka Lighting’s Stella luminaire is ceiling-suspended, and a diffusion dome hidden inside the shade creates uniform direct and indirect illumination. Some of the light is reflected upward by the dome, and this indirectly illuminates the ceilling.

Nora Lighting’s 120-277V outdoor, die-cast emergency light with photosensor includes general lighting for everyday use and emergency lighting when a power failure occurs.

Eaton Lighting's LED luminaire provides continuous illumination without socket shadows or LED hotspots. It is designed for cove and perimeter applications and provides power lumens and low-energy consumption. 

Honeywell’s 22W security wall light produces 2,000 lumens, which helps lower energy costs. It is designed with a dusk-to dawn-sensor. It features a durable honeycomb plastic lens.

Nora Lighting’s outdoor LED wall-pack features a photosensor for dusk-to-dawn security lighting. The luminaire includes general lighting for everyday use and an emergency lighting option when a power failure occurs. It has a die-cast aluminum housing and a resistant, polycarbonate lens. The illumination can be controlled with a photosensor or wall switch.

LumenFocus’ LED vaporproof luminaire features wall- and ceiling-mount options. It is designed with a frosted polycarbonate shield to protect against dust, moisture and vapor. It is suitable for most indoor or outdoor applications where moisture or debris are issues. The die-cast threaded cage guard is secured with stainless steel hardware.

Focal Point’s 4¹/₂-in. cylinder surface mount luminaire is designed for a wide variety of environments, including wet ones. It features spot to super wide flood distribution options. The cut-off cone option with 80-degree super wide flood minimizes scalloping on walls and allows for increased spacing. The 50-degree cut-off allows for brightness control.

Nora Lighting’s adjustable retrofit luminaire is available in 4-, 5- and 6-in. apertures. The downlight rotates and adjusts while never exposing the recessed can or breaking the ceiling plane. The fixture is retrofitted into existing recessed housings or quick connect into dedicated LED housings. The adjustable fixture can also be used in sloped ceiling applications. Each adapter has receptacles on both ends to connect SC patchcords together.

WAC’s LED ceiling-mount luminaire delivers light through a self-illuminating halo. A frosted acrylic diffuser conceals the high-powered LEDs within the spun metal shade. Corso has a universal driver that is concealed within the canopy. The luminaire delivers up to 728 lumens.

Molex’s Woodhead LED string lights are designed for high performance and energy efficiency. The string lights are outdoor-rated and feature a rugged polycarbonate lens that withstands the elements. Up to 12 100-ft. strings of lights can be powered by one outlet, allowing for less wiring and smaller wire gauge. The lights also provide 4–5 in. more headroom.

TCP’s LED adjustable wall pack is an alternative to metal halide luminaires. It delivers bright, uniform light while providing energy savings. It was designed for outdoor applications requiring light. The pack mounts to a standard junction box. It has a heavy-duty, die-cast aluminum housing with an impact-resistant polycarbonate lens.

Tenmat’s FF130R cover is a flexible thermal barrier designed to keep insulation from low-profile, LED recessed lights in retrofitting applications. It is made out of fire-safe mineral wool and can be rolled up for easy installation from below the ceiling. It can also be used to reduce energy loss by preventing airleakage and cold air entering the living space.

WAC Lighting’s Essence LED pendant luminaire features an architectural ring offered in five sizes, ranging from 24 to 71 in. It features proprietary seamless blow-molded acrylic and is suspended by low-profile powered aircraft cables. It is offered in a 3,500K color temperature. The dimmable luminaires have a 90 CRI and can be dimmed with an electronic low-voltage dimmer or 0-10V version.

LumenFocus’ FormFocus FFRP is a new lensed industrial luminaire designed to be an LED upgrade for industrial luminaires in the field. The kit comes prewired and ready to install with a lift and shift design. It is available in several sizes and lumen output packages.

Eureka’s Verner LED luminaire is a powerful, COB-type light engine fused to a geometric aluminum shade. A polymer diffusion dome hidden inside the shade softens the light and makes for a pleasant surprise when users look up. It is offered with phase or 0–10V gradation options. It has a slotted top to let heat escape.

G&G Industrial Lighting’s FPX linear Wash Down LED luminaire is designed for task lighting in food processing. It is IP-69K rated, corrosion-resistant and is capable of withstanding high-temperature, high-pressure washdowns during daily sanitization processes. The low-profile 2¹/₂-in. housing. It produces up to 20,000 lumens.

Focal Point’s Seem 1 luminaire is engineered for design flexibility. Users can create compelling spaces with individual units, continuous runs or patterns with 90-degree corners in 1-in. increments. It features an alignment plate and an internal joining mechanism for easy installation of continuous runs. End caps and internal reflector extensions eliminate light leak. It is available in suspended, recessed, surface- and wall-mount options.

Nora Lighting’s Camo series of tunable white LED, surface-mounted luminaires have an integrated, selectable CCT switch, so users can adjust the color temperature from 3,000K to 4,000K or 5,000K at 90+ CRI. They are available in three diameters: 6, 8 and 11 in. They can be mounted over a standard or fire-rated junction box. Optional torsion springs allow them to be retrofitted into 5- or 6-in. recessed housings. They have a white finish and an integrated magnet, so decorative rings can be attached.

2nd Ave. Lighting’s Cilindro Circleline flushmount luminaire features a curved profile and industrial detailing. A unique motif of mechanical cogs with jagged teeth between two sets of tracks lines the perimeter. It is 42 in. wide and approximately 12.5 in. tall.

WAC Lighting’s Silo series LED recessed, multiple-spot luminaires are available with one, two, three or four retractable, adjustable heads with a 360-degree horizontal rotation and 180-degree vertical aiming with continuously adjustable beam angle from 15 to 45 degrees. A variety of lenses are available, including colored and frosted flat lenses, spread, and beam-elongating versions.

Access Fixtures’ LED reflector-style high-bay luminaire, the Hobb, has an aluminum reflector, which minimizes glare and distributes light over large areas. The light also is diffused by a tempered glass lens that directs light in a circular 110-degree beam spread. It can be mounted from 19–26 ft. with a standard hook mount. It is available in 115W and 215W.

Nora Lighting’s Mac LED track luminaires include the Mac and Mac XL. The fixtures offer a driverless appearance and field changeable beam spreads. The Mac produces up to 700 lumens and is 3½-by-2¼-by-5 in. The Mac XL produces up to 1,100 lumens and measures 4½-by-3¼-by-6½ in. A preinstalled narrow flood optic is included, along with a spot optic.

Focal Point’s Equation 2 troffer luminaire is available in 5,500, 6,000, 6,500 and 7,000 lm. It also features Focal Point’s Connected Solutions, which enables integration with intelligent building management systems through wired and wireless networks, allowing occupants to control the lighting for maximum comfort and energy savings.

Focal Point’s Seem 4 recessed-grid linear luminaire is designed for use in lay-in and regular grid ceiling styles with flush, regress and pop-down lens options. It is available in individual units, continuous runs or pattern configurations. Simple joining and alignment, and field-adjustable mounting brackets speed up installation while above ceiling driver access allows for servicing.

Sylvania’s LEDvance IP-66 canopy luminaire is designed for building exteriors, outdoor corridors, walkways and stairwells. It can be installed in tight ceiling spaces. It is available in four wattages/lumen packages, two color temperatures, round and square shapes and two finishes.

Luminis’ Syrios luminaires provide a 9-degree narrow beam with a sharp cut-off option. There is also a narrow reflector, varying between 12 and 15 degrees depending upon the model. They also have 26–30-degree flood optic as standard and a 40-55-degree wide optic option, depending on the model.

Eureka Lighting’s Verner pendant luminaire is intended for use in high ceiling applications, open areas or spaces where diminished focus on the ceiling is the goal. It features a classic spherical diffuser and a cone-like shade that directs light downward. It has no visible hardware and provides 2,400 lumens in the standard version and more than 4,200 lumens in the high-output version. It is available in 3,000K, 3,500K and 4,000K.

Luminis’ Oculus recessed downlight is designed for outdoor, under-canopy applications. It is weather-resistant with an IP-66 rating. It provides 360-degree rotation and 30-degree tilt angle for precise aiming of light.

Aurea Lighting’s high-efficiency, 125-LPW LED panel light has a sturdy, one-piece aluminum frame housing and an impact-resistant back panel with integrated light leakage protection. It is available in a 28W, 3,500 lumen model and 36W, 4,500 lumen model.

Kichler’s Marilyn luminaire features linear arms, clear seeded globed glass and a shiny polished nickel finish with velvety matte black accents. It is available in a four- and six-light chandelier, one-light pendant and one-light wall sconce.

2nd Ave Lighting’s Caliope chandelier is 80 in. wide and adorned with 24 amber faux candlelights, which are perched on bobeches. The lights are embraced by hand-forged, iron-scrolled arms attached to the oval frame. A downlight is located in the center of the frame for functional illumination. The overall height ranges from 87 to 158 in. as the chain length is field adjustable.

Cree’s KBL luminaire is available in multiple lumen, CRI and CCT packages and with multiple reflector and lens options. It has a lightweight construction and universal mounting, which includes a hook and cord with 6-ft. whip and an adapter plate for pendant mounting.

Accord Lighting’s Duplo double-cylinder suspension pendant is available in models for E-26, E-27 and LED light sources. The suspension cable can be adjusted up to 63 in., and its wood S-shaped shade is available in 34 finishes and colors.

Barn Light Electric’s Bullet LED luminaire is constructed from durable, heat-treated aluminum and offers targeted lighting in an unobtrusive fixture. It is available with multiple customization options, including lumens up to 1,600; narrow, medium and wide optics; clear or frosted lens; and a dimmer option. It is available in a selection of polyester powder coat finishes, cord colors and gooseneck arm styles.

Eureka Lighting’s Twin luminaire has a double-layered shade, enclosing two separate light sources. The first, a circular LED module, provides indirect light between the shades creating a decorative halo effect. The second, a central downlight, has a softer edge than a spotlight and offers reduced glare.

Gerard Lighting’s Sylvania RoadLED Midi is an LED road lighting luminaire designed to replace traditional high wattage HID luminaries used on major roads. An inbuilt NEMA 7 smart cell base ensures it can be networked as part of smart grid rollout. It accommodates devices and sensors for smart city applications.

WAC Lighting’s retro-inspired dweLED Trio luminaire features evenly illuminated strips above a chrome backplate. It can be mounted over a vanity or vertically as a sconce. With a CCT of 3,000K and a CRI of 90, it delivers up to 2,300-plus lumens and dims down with an electronic low-voltage dimmer. It uses a universal voltage driver concealed within the fixture. It is available in lengths of 20, 28 and 37 in.

Modern Forms’ Chaos luminaire features ultra-thin powered aircraft cables to stabilize the suspension with as little visual interference as possible. Each “falling” bar contains an integrated LED. A universal driver is provided within the canopy. An electronic low-voltage or 0-10V dimmer enables users to control light output.

Fresco’s Aurora outdoor heater combines dimmable task and mood lighting with ambient infrared heat. It is designed to be suspended from flat or gabled roofs and is useful in external dining areas, verandas and balconies. Each function can be effortlessly controlled using an optional remote control or a free app.

CSL Lighting’s Square Entity surface-mount, LED luminaire emits direct illumination vertically from the rectangular form. It is 5-by-5-by-6 in. and is UL/C-UL-listed for wet locations. It is available in 21-plus finishes.

Acclaim Lighting’s Dyna Drum EO high-output, high-efficieny, outdoor-rated, color mixing and white LED floodlight features internal 100–277V AC power supply, an onboard DMX+RDM driver and an Aria wireless DMX technology. The color fixture comes with a standard narrow 10-degree beam with optional 20-, 40-, 60- and 10-by-60-degree quick-change lenses.

Acclaim Lighting’s Linear One LED luminaire is designed to install with no visible cables. With 1- and 4-ft. modular sections that can be connected end-to-end, it is available in 2,700K, 3,000K, 3,500K and 4,000K at 80 and 90 CRI. It has 1 to 100 percent dimming.

EarthTronics' Mini Panel LED luminaire comes in 5¹/₂-, 7- and 9-in. square and round designs and can be installed on 4-in. J-boxes with a unique “snap fit” locking design. The 5¹/₂- and 7-in. fixtures can be retrofit for 4- and 6-in. downlight recessed fixtures with easy-to-install clips. It is compatible with standard incandescent dimmer controls, providing dimming from 100 to 5 percent.

Engineered Products Co.’s ProSeries Elite weather-resistant LED utility luminaire is available in ceiling, pendant or wall mount configurations. It produces 79 lumens per watt, which provides a 360-degree lumen distribution. It has a UV-resistant, impact-resistant polycarbonate diffuser.

Focal Point’s ID+ cylinder downlight luminaire is available in 3¹/₂- and 4¹/₂-in. aperture sizes. It can be suspended or surface-mounted. It features a single-piece, die-cast reflector; a knife edge and a decorative reveal. Fifty- or 80-degree cut-off cones and distributions from spot to super-wide flood are available.

Focal Point's Seem 1 features a nominal 1¹/₂-in. aperture and can impart a glowing linear elegance to interior spaces with suspended-, recessed-, surface- or wall-mount options. For individual units, it can create continuous runs or patterns in 1-in. increments. It offers independent direct/indirect or direct-only distributions, including a wide batwing optic. It can be specified with flush or pop-down lenses.

Lutron Electronics’ Finiré Prime LED recessed luminaire delivers 90+ CRI and a standard Lutron 1% dimming driver. Installers can specify and design lighting fixtures by choosing trim shape, color temperature, beam spread, housing and control type.

Barn Light Electric Co.’s Loma deep-bowl ceiling pendant is available in a variety of customizable options including shade size and finish color, plus cord, stem and chain options. It is available in cord-hung, stem and chain-hung mountings.

Sylvania’s Slim floodlight produces up to 6,000 lumens and 119 LPW. With simple mounting, an IP-66 rating and slim housing, it is designed for floodlighting applications. It offers wide distribution and multiple output levels.

Orbit Industries’ LUHB1 round LED high bay luminaire is designed to replace up to 1,200W HID fixtures in indoor applications. Each model includes a hook mount for use with suspension cable and an optional trunnion mount.

Barn Light Electric Co.’s Downtown minimalist stem-mount pendant luminaire features a single bare bulb socket attached to a slight metal stem. It is available in powder-coat and porcelain finishes and in brass or copper.

JESCO’s rectangular, back-lit, wall-mounted mirror provides evenly distributed white light. It is available with LED or T5 linear fluorescent light sources, in three sizes and two styles. 


ProBuilt Professional Lighting’s 80W LED longneck luminaire provides 7,600 lumens and 360-degree directional lighting. Units can be interlinked together. The LED bulb generates no heat so units are cool to the touch.


National Specialty Lighting’s 20W vanity light is suitable for damp locations and an input voltage of 120V AC. It is available in 3,000-, 4,000- and 5,000-K color temperatures. 


Sonneman’s Haro 16-in. LED pendant luminaire is made of die-cast aluminum in three finishes—bright satin aluminum, satin black and textured white. It produces 4,000 lumens at 3,000 K with a CRI of 80. 


Nora Lighting’s Cylo cylindrical LED rail head luminaire can be attached anywhere along a Nora 120V rail system. It features die-cast aluminum with bronze or brushed nickel finishes, full-rotation aiming and two beam spreads. 


Focal Point’s Nera luminaire features Power-Up suspenders, which deliver power through the suspension cables. It is enabled with Connected Solutions, connecting to control systems, sensors and drivers, including those by Acuity nLight, Enlighted, Legrand Wattstopper, Lutron and Osram.


Emerson’s Appleton Mercmaster Generation 3 LED has a corrosion-resistant housing and is rated for hazardous, marine and wet locations. It features seven lumen outputs, six mounting types, four light distribution patterns, four replaceable globe choices, three color temperatures and two input voltages.


Barn Light Electric’s chain gooseneck luminaire is hand-spun from commercial-grade steel then coated with layers of porcelain enamel glass. It features a high-gloss finish available in 11 colors. The straight gooseneck arm comes in 18 and 24 in., and the chain is adjustable. It is also available with LEDs. 


Acclaim Lighting’s Pixel Bar outdoor-rated, pixel-controllable, direct-view LED luminaire comes with both rounded and flat diffused lens options, offering beam angles of 180 and 120 degrees, respectively. It can be linked with a multipin, single-cable system and interconnected up to 100 ft. 


Griven USA’s GoboLED solid-state luminaire projects logos or graphics onto surfaces in architectural settings. It features manual zoom and focus functions and built-in beam angle tuning from 19 to 35 degrees.


Modern Forms’ Catalyst LED interior luminaire has polished-nickel adjustable arms and mouth-blown freeform glass diffusers. It is offered in three sizes with 8, 9 or 10 lights. 


Lutron Electronics’ Finiré 3-in. LED downlight provides a 90+ CRI, a 1% dimming driver, a field-changeable beam spread reflector and trim assemblies, and a field-replaceable LED module and driver. It also allows for incremental adjustment from 0–40 degrees and hot aiming with a supplied tool. 


EarthTronics’ wet location-rated square mini-panel LED operates on 120V AC 60 Hz and features an impact-resistant acrylic lens, 5–100 percent dimming and a 50,000-hour rated life. It is available in 5 1/2-, 7- and 9-in. square designs ranging from 11, 14 and 17 watts producing 700, 900 and 1,200 lumens. 


U.S. Architectural Lighting’s Razar-PT1 LED Generation post-top luminaire features 40 or 80 PLED optical modules with 10 distributions, which are replaceable and individually field-rotatable in 90-degree increments. Its LEDs are available in 3,000K, 4,000K and 5,000K CCT. Finishes include black, white, grey, dark bronze and green. Custom colors are available.

Nora Lighting’s NRS80-500 14W LED glass cylinder pendant produces 1,100 lumens with a 90+ CRI. Designed to provide usable downlight, it features an architectural die-cast aluminum heat sink and a dimmable driver mounted in the canopy.


ConTech Lighting’s adjustable downlight has a 16-gauge galvanized steel housing; interchangeable spot, medium and flood beams; and a lockable adjustment mechanism, which allows for a 45-degree tilt with 15-degree gradations and 360-degree rotations. 


Forever Lamp’s industrial LED high-bay luminaire is IP-66 rated and UL-listed for wet conditions. It is available from 18,500–30,000 lumens and up to 150 LPW. It is suitable in temperatures from –40–55°C and in ceilings up to 35 ft. It can be dimmed from 0–10V and has an optional occupancy sensor. 


Orion’s Apollo LED Gen 3 modular high-bay luminaire is designed for industrial, commercial and retail applications. It has an aluminum powder-coat frame and has a rated life of 125,000 hours. A variety of options and accessories are available, including emergency battery backup, a tandem option, full-range dimming driver, end caps, lens choices and more.

Earthtronics’ LED adjustable Wall Pack luminaire is designed to provide exterior, wide-flood area illumination for commercial, industrial and municipal facilities. It is available in 20, 30 and 70W and a 4,000K color temperature. It accepts 100–277V AC power and provides more than 100 lumens per watt and a 80+ CRI. The 20W, 30W and 70W models provide 2,100, 3,000 and 7,700 lumens, respectively.


SLV Lighting’s Para Cone 40 120V pendant luminaire is made of steel and aluminum and uses one E26 60W max LED lamp. The luminaire is roughly 141/2 in. tall and 153/4 in. in diameter. The pendant length is 59 in., and the glossy black canopy is roughly 43/4 in. in diameter and 11/5 in. tall. It is surface-ceiling mounted and available in several colors.


Progress Lighting’s P3632-1530K9 industrial-style, flush-mount LED luminaire features one 29W LED, which has a 3,000K color temperature and a 90+ CRI. It has etched glass and polished chrome-finished housing. The luminaire has a 13-in. diameter and is 2 and 1/2 in. tall. 


JESCO’s Madison AC LED ceiling pendant luminaire is made of three cased-glass sections connected with transparent glass seams. It is 9 in. in diameter and 13¹/₄ in. tall, and it can be suspended up to 72 in. It is available in 2,700K or 3,000K color temperatures either in a black finish with a red cloth-covered wire or a white finish with grey cloth-covered wire. 


XtraLight LED Lighting Solutions’ round high-bay LED luminaire can be mounted at heights ranging from 12–40 ft. and delivers up to 144 LPW. It has a die-cast aluminum housing and an IP-66 rated LED optical enclosure. It can be mounted to an existing pendant. Hook-, trunnion- and loop- mounting options are also available.

Larson Electronics’ IP-66 waterproof-rated, chemical-resistant, explosion-proof 10W LED luminaire is designed for industrial applications, hazardous work spaces and areas where gases and vapors may be present. Its built-in motion sensor is capable of detecting movement in a 15-by-15-ft. area when mounted at 16 ft. It has ¹/₂-in. or ³/₄-in. hub openings located on either side of the housing for running electrical conductors in a feed-through configuration.


Eaton’s Ephesus Stadium Pro luminaire is designed for sports stadiums and to meet the accompanying demands of international HDTV broadcasting, digital photography and slow-motion recording. It has a solid-state design, an integrated laser mount for precision aiming, a weather-tight design, and lighting and color-tuning control options for creating dynamic scenes or to match outdoor lighting conditions. Users can monitor the health and status of each light using the control system.


Lutron Electronics’ Ivalo Lumaris linear LED luminaire is designed for tight applications including coves, under cabinets, shelves and counters. It can be surface-mounted or mounted with a 30/60-degree angle bracket. It has a 90 CRI and is available in 2,700, 3,000 and 3,500K color temperatures. It is 1¼ in. wide and comes in 6-, 12-, 18-, 24-, 36- or 48-in. lengths. 


E-conolight’s E-LL6 LED linear high-bay luminaire delivers 12,900 lumens at a 4,000K color temperature. It has a steel construction with a white finish. Six LED tubes and a chain-hanging mounting kit (with two wire form hangers and two 36-in. chains) are included. 


Nora Lighting’s bright white pendants come with 14W LED lamps. They produce 1,100 lumens and offer 90+ CRI. They have a die-cast aluminum heat sink and dimmable driver in the mounting canopy. The glass shades are available 
in a range of sizes, additional colors and mounting options.

FSR’s Lite-It enclosure box light fastens to any ferrous metal surface using a magnet. It automatically turns off after 75 seconds, and its antiretrigger circuit prevents it from staying on even if the switch is held continuously. Its wide-angle, dual LEDs produce more than 12 lumens.


HyLite LED Lighting’s Lotus LED luminaire has a 180-degree adjustable mounting arm, an optimal 120-degree beam angle, an IP-65 rating and a 140 LPW efficiency. It comes with a 20-kA inline surge-protection device and is available in sizes from 20–100W.

Nora Lighting’s 4-in. Iolite with 4-in. die-cast, aluminum adjustable downlight produces 800 lumens with a CRI of 95 and can be installed with 25-, 28- and 60-degree beam spreads. It is available in round, square or deep regress in regressed cone or regressed gimbal styles, in three color temperatures (2,700K, 3,000K or 4,000K) and six finishes. 


Zumtobel’s Ondaria 37-in. pendant luminaire delivers 10,384–11,307 lumens. It has a white enamel aluminum housing with a 37-in. diameter, a circular concave PMMA opal lens and a CRI of more than 80. It is available in color temperatures of 3,000K, 3,500K or 4,000K and in 17- and 25-in. models. 


Nora Lighting’s NRS99-464 Biba monopoint luminaire comes with a 40W G9 halogen lamp, an outer glass shade and a white, frosted inner shade. Five colored inner shades (NRS80-405) are sold separately. The 20-ft., 18 AWG pendant cord can be field cut to the desired length and is terminated at the canopy by a clip. The hardware comes in three finishes: bronze, silver and brushed nickel.

Orion Energy Systems Inc.’s ISON LED exterior area light is designed for surface lots, walkways, area and street lighting. Its die-cast, aluminum-alloy housing is available in three design options and multiple control options, including wireless and auxiliary power.

USAI Lighting’s 5-in.-by-5-in. square BeveLed Block completely encloses surface-mounted junction boxes in concrete ceilings. It emits white light in color temperatures from 2,200K to 6,000K and produces 25- to 90-degree beam spreads. It is designed for ceilings with recessed or exposed conduits and is available in white, black, grey, bronze and custom colors.


Litecontrol’s Arcos M5 P-ID-59M pendant-mounted luminaire is 2³/₁₆ in. high and 7⁷/₈ in. wide. It is available in one or two T5 or T5HO lamp cross-sections. Installation features include prewiring and field-adjustable aircraft cables. Sculpted, shelf-style and flat end-cap designs are available. It is compatible with several integrated control systems, including CS/AV for switching between general and AV lighting and CS/dlh for daylight harvesting. 


Soraa’s Barrel luminaire has a curved arch form and is available in 2-in.-by-2-in. and 1-in.-by-4-in. dimensions. It has an extruded aluminum frame. It is designed for shallow ceiling plenums where HVAC and structural interferences are an issue. It delivers up to 3,200 lumens, and standard dimming driver options include 0–10V Lutron and EldoLED.

LBL Lighting’s Sphere line-voltage pendant features a crisscross-patterned die-cast aluminum heat sink and an optional warm color dimming LED module, which gradually changes color from 3,000K to 2,200K. It can be clustered using three, seven or 11 multiport canopies and is available in white, black and silver. 


Access Fixtures’ KOTA LED high bay luminaire is available in 185, 240 and 320W. It delivers more than 105 lumens per watt and has Flip Chip Opto COB LEDs that dissipate heat through electrode channels. Heat escapes the chip area, keeping junction temperatures low. 


Eaton’s Lumark Night Falcon small, low-wattage LED floodlight luminaire can be wall-, ground- or pole-mounted. It has an aluminum, die-cast housing and weighs less than 14 lbs. It is available in two lumen packages: 5,700K and 2,700K and seven colors: summit white, white, gray, bronze, black, dark platinum and graphite metallic.

Maximus Lighting’s Craftsman smart home security light has a built-in camera that detects movement and sends a real-time alert to a smartphone where the user can see and interact with visitors. Captured footage is available for up to 2 hours. The light can be set to a schedule or automatic dusk-to-dawn mode. 

Barron Lighting Group’s SCL emergency light is 9.1 in. by 5.3 in. and made of steel. It can be wall- or stem-mounted. It has 3.6W, fully adjustable LED lamp heads; a numeric indicator display; and a toolless, hinged door that provides safe access to the 6V NiMH battery without exposure to line voltage. 


V2 Lighting Group’s Tilt LED luminaire has an adjustable, lockable, 360-degree pan and 30-degree tilt optics. The 6-in.-round cylinder luminaire can be ordered with a 15.4-in. or 7-in. shell. It produces up to 3,000 lumens at 83 or 98 CRI with 20-, 40- or 60-degree reflectors.


Hubbell Outdoor Lighting’s Colt LED floodlight has three distribution options (narrow, medium and wide), a rotatable hood, die-cast aluminum housing and a dark bronze finish. It uses 1/2-in.-by-14-in. NPS threaded adjustable knuckle mounting and comes in 3,000K and 4,000K color temperatures.

Forest Lighting’s UniV8 T8 LED linear lamp is designed for direct-wire and ballast-compatible applications. It is 4 ft. long and produces up to 115 LPW. It is available in 15W and 19W models and 3,500K, 4,100K, 5,000K or 6,000K.


Big Ass Solutions’ LED garage light is housed in a single piece of anodized, extruded aluminum. It maintains 70% of initial lumen output for up to 150,000 hours. An optional integrated adjustable occupancy sensor is also available.

Nora Lighting’s 6-in. aperture LED cylinder is available as a high-performance LED, an economy LED or medium-base incandescent/LED in four mounting options: cable, pendant stem, surface and wall mount. It produces up to 4,000 lumens in 2,700K, 3,000K, 3,500K and 4,000K color options. The fixture measures 14½ in. by 7½ in.

Cree’s HXB high-bay luminaire operates in ambient temperatures from –40°F to 149°F and delivers 70,000 lumens at up to 140 LPW. It can be mounted at heights of 30 ft. and higher, and optical options include flood and aisle distributions. 


Barn Light Electric’s vanity strip luminaire joins bare lamp sockets to a backing plate. The three-lamp model is 24 in. wide and the five-light model is 36 in. wide. It is available in 20 powder-coat colors and 10 porcelain colors. 


Columbia Lighting’s wall wash LED luminaire provides uniformity of 5:1 on vertical surfaces from ceiling to floor. It produces 60,000 hours of light at 116 LpW and has a 3-in. aperture. Four LED colors and 80 or 90 CRI choices are available. Six lumen packages with outputs up to 1,300 lm/ft are also available. 


Contech Lightings’ LPU2 undercabinet luminaire has a three-position switch to select between color temperatures: 2,700K, 3,000K and 4,000K. Resistant to shock and vibration, this fixture is only 7/8 in. deep. It is also available in four lengths and lumen combinations: 12-in., 300Lm; 18-in., 450Lm; 24-in., 900Lm; and 32-in., 1,050Lm.

SnapPower Products’ guidelight adds a downcast nightlight to receptacle coverplates. Installation requires no wires or batteries. It’s ambient light level sensor automatically turns the LED light on and off. It comes in white, light almond and ivory. 


Nora Lighting’s trimless MLS series recessed luminaire is available in one-, two- or three-light linear configurations. The fixtures are dedicated LED or PAR 30 medium-base light sources. Each module can be adjusted independently on two axes for display illumination or wall treatments. An included mud-in ring allows the modules to be framed with clean, contemporary edges. LED models have dimmable fixtures and can be specified with 40-degree or 15-degree beam spreads. They offer 90+ CRI for realistic color rendition and 1,900 lumens at 28W per module. Color temperatures range from 2,700K to 4,000K CCT.


Luraline Lighting’s LED MiniPack flush-mount wallpack provides midrange directional lighting in an architectural-style fixture. Made with heavy-duty cast aluminum, it is available in a 7-in.-by-7-in. wedge or 8 1/2-in.-diameter round shape with a cool-running multichip LED array. An optional photocell and surge protection are available. It is designed for doorways, walkways, breezeways, corridors and wall- or column-mount applications.


Progress Lighting’s Rush compact, linear, two-light vanity fixture has etched opal glass and halogen-based lamps. It comes in one- through four-lamp options, and it has an antique bronze finish with natural brass accents.

Eaton’s Portfolio surface-mount LED series luminaire uses WaveStream optical technology to provide uniform, glare-free illumination in high ceiling applications. It has a standard dual dimming 0–10V/trailing-edge driver and an optional Fifth Light DALI or 
1 percent 0–10V driver and is available in five lumen packages with medium- or wide-beam distribution.


Everlast Lighting’s outdoor Walkway series LED has a classic form factor and adjustable standardized mounting hardware. It is available in acrylic and polycarbonate. Proprietary optics provide reduced uplight and disabling driver glare.