Product Library
Product listings are for informational purposes only. For prices and purchasing, contact the manufacturer or your distributor.
Allied Tube & Conduit Corp.'s Conduit
Manufacturer:
Allied Tube & Conduit’s Super Kwik-Couple raintight conduit eliminates the need for field-threading. The design allows for installation in compact areas, and it is available in sizes ½- to 5-in. The blue coupling design allows inspectors to easily identify wet location approval and is listed for wet and dry locations.
- Conduit
Related Products
-
Allied Tube & Conduit’s Conduit
- Conduit
Allied Tube & Conduit’s Allied IMC conduit is resistant to impact and can be cut, bent and joined for smooth, continuous raceways. The hot galvanized exterior increases corrosion resistance and protection against white rust.
-
Rack-A-Tier's Bender
- Bender
- Conduit
Rack-A-Tiers’ Hoppy Bender features a “stop” attached to the bender head to create repeatable bends. Simplified multipliers are engraved into the bender for placing the “stop” prior to making offsets and four-point saddles. Special 22.5 and 45-degree marks engraved into the bender for placement of conduit bend marks and standard degree marks for stop placement are used together for bending three-point saddles without reversing the conduit in the shoe.
-
Greenlee's Cable Puller
- Cable Puller
- Conduit
Greenlee’s G10 Tugger 10,000-lb. two-speed puller can shift from high-speed/low-load pulling to low-speed/high-load pulling with a double-tap motion on the foot pedal control switch. The on-board force gauge provides visual communication of pulling force and speed changes. It is used for cable pulls requiring both high and low pulling loads.
-
Conduit Body
- Conduit
- Harness
Bridgeport Fittings’ LB-RT conduit body with an integral, raintight connector enables users to access the interior of a conduit system for inspection, pulling and maintenance. It comes with stainless steel screws, an aluminum cover and a neoprene gasket. It is made of a zinc die-cast material and has a ball-burnish finish.
-
Southwire's Conduit Bender
- Bender
- Conduit
Southwire's conduit bender performs common bends such as stub-ups, offsets, back-to-back and saddle bends. The grooved hook prevents conduit from slipping, twisting or rolling when performing bends.
-
Ideal Industries' Conduit Bender
- Bender
- Conduit
Ideal Industries’ conduit bender is heat-treated to provide extra strength and reinforced at stress points for a longer life. The deeply serrated step helps prevent slippage when applying maximum leverage. The flat hook surface provides a stable starting point for the user, and the grooved internal hook surface also helps prevent the conduit from slipping. It features precision marks locating degree scale, star, arrow and rim notch.
-
Milwaukee Tool's Conduit Bender
- Bender
- Conduit
Milwaukee Tool’s conduit bender has high-contrast markings, a reinforced hook and pedal and a secure double-bolted handle. It also has bending references and a wear-resistant reference chart. It is available in 1/2- and 3/4-in. aluminum models and 1/2-, 3/4- and 1-in. iron models.
-
RACO's Conduit Hangers
- Conduit
RACO's TH series conduit hangers are designed for use in wet or dry locations to support runs of rigid/IMC and EMT conduit from ceilings and walls. It has a retained bolt and threaded hole and can be mounted vertically or horizontally. It is made of durable steel with a pregalvanized finish for corrosion protection. It is available for 3/8–2-in. rigid/IMC and 1/2-2in. EMT conduit.
-
Southwire Tools' EMT Conduit Bender
- Bender
- Conduit
Southwire Tools’ 1/2-in. EMT conduit bender performs common bends, such as stub-ups, offsets, back-to-backs and saddles. It has a cast-aluminum head with raised markings on both sides, a grooved hook, a large serrated step and a swaged-steel handle.
-
Southwire's PVC and Thermoset Plastic Conduit Bender
- Bender
- Conduit
Southwire’s PVC and thermoset plastic conduit bender features a textured, powder-coated exterior and a chrome-reflective interior for maximum return of energy, resulting in faster heating times. It also has 6-in. solid wheels, an indicator light to notify the user when the elements are on and a large instruction label that includes the NEC bending chart.
-
Thomas & Betts' Liquidtight Flexible Metal Conduit
- Conduit
Thomas & Betts’ liquidtight flexible metal conduit has a hot-dipped zinc galvanized steel core and smooth PVC extruded jackets. It’s available in gray or black and in sizes from 3/8–4 in. Conduits up to 11/4 in. are integral copper bonding wire with a square lock design. Conduits from 11/2–4 in. have a fully interlocked design.
-
Allied Tube & Conduit Corp.'s Super Kwik-Couple Conduit
- Conduit
Allied Tube & Conduit Corp.’s Super Kwik-Couple conduit is designed to eliminate field threading. It connects GRC to threaded or unthreaded IMC, EMT or other GRC. Separate couplings are needed.