BOS Construction Solutions’ Baselight LED tower light is compact and easy to operate. It weighs between 70 and 100 lbs. and includes an automated digital mast system operated by an onboard computer. Terrain wheels are easy to attach and remove. The charge time is 6–8 hours.

Ridgid’s Gen5X hybrid folding panel light can be folded backwards for 360-degree light output and used as a bright panel light for specific areas. Temperature-control electronics protect it from overheating and keep it cool. It provides 14 hours of continuous run-time with variable light power dial.

Barron Lighting Group’s RL series LED rope lights an economical solution to introduce creativity into any environment. The round, flexible, clear, UV-resistant PVC housing enables indoor and outdoor installation. The LEDs are situated vertically within the housing, allowing the light output to be emitted horizontally in a 360-degree viewing pattern.

Generac’s CTF-10 plug-in light tower is designed for long-term illumination of medium- to large-sized working areas. It is 33 ft. tall and has four powerful 240W LED fixtures. It is powered by utility power and has minimum operating costs and no scheduled maintenance. It can be used for temporary lighting, including general rental, work-site, parking lot lighting and more.

SLG Lighting’s 120V Temp G1 LED temporary light is designed for construction and job sites. It has a 100-ft. cord with LED bulbs located at 10-ft. intervals. Each LED bulb is impact-resistant. It is compatible with carabiners, hooks, nails and zip ties.

Makita’s DML807 18V LXT lithium-ion cordless LED lantern/flashlight has three lighting modes: 360- and 180-degree lantern and flashlight. It is 14¼ in. long and weighs 2.2 lbs. with the battery. It comes with a three-year warranty and has a built-in USB port and a fold-away metal hang hook.

Southwire’s ProLight 10W LED work light features a 110-degree pivoting head for a bright white floodlight beam. It can be mounted on a tripod or magnetic base, and the lithium-ion battery offers power for 10 hours on low and 5 hours on high.

Alloy LED’s PowerLine 300 driverless LED tape light features runs up to 164 ft. It is available with both 120V hardwire and plug-in options, and it provides up to 337 lumens per foot. It is IP-65-rated for indoor and outdoor installations.

Southwire’s 7165SW LED string light is available in 50- and 100-ft. lengths. It features LEDs on the top and bottom of the module for full job-site coverage. It is IP-65- and outdoor-rated to protect against the ingress of water and dust. There are no bulbs or lamps to replace, and it delivers 8,000 lumens with a 100-ft. string.

Milwaukee Tool’s MX Fuel Rocket tower light/charger is a 10-ft. light designed for inside and outside use. It delivers up to 27,000 lumens of task and area lighting, and it can be set up in seconds, features outriggers for leveling and withstands harsh job site environments.

Greenlee’s FL2AAAP LED compact flashlight produces 7 lumens and features an all-weather, lexan construction. It includes a pocket clip. The beam distance is 46 ft., and the battery life is 14–15 hours. It is sealed against water and dust and is waterproof up to 3 ft. It has a twist on/off bezel switch. The average life is 50,000 hours.

Tenmat’s FF109-250 fire-rated light cover is developed for low-profile LED lights. It has been 1-hour fire tested to meet building code requirement and provide a fire barrier around LED lights. It is designed for both retrofit and new construction, and it is flexible enough to be installed through 4- and 6-in. ceiling openings.

Hubbell’s HLEBS series hazardous-location emergency lighting system is designed for environments known to have high concentrations of gas, explosive vapors and dust. The battery unit operates in temperatures between 32°F and 113°F, and the remote lamp heads operate up to 131°F. It is explosion-proof and dust-ignition-proof.

Orbit Industries’ LTL series temporary work light is listed for damp locations. It has a stainless-steel cage and hook for durability in heavy-duty construction environments. It features 10 ft. of male plug cord and hidden socket, and it operates in temperatures between –40°F and 140°F.

National Specialty Lighting’s CCT Adjust mini flood light is a wide-distribution flood in a small, discrete housing. It is listed for wet locations and can operate in temperatures between –4ºF and 122ºF. The beam angle is 150-by-120-degrees. Users can change the color temperature with the push of a button.

Matco Tools’ rechargable neck light enables users to position the articulating light heads to direct the light beam to the precise angle needed. Users can charge both light heads with the two-headed, split charging USB cord, and the two modes of light intensity turn on at 300 lumens.

Lind Equipment’s 60W Beacon360 Trek casts light in 360 degrees and upward while illuminating work areas up to 25 ft. in every direction. It can be attached to accessories, such as tripods, floor stands, magnets and clamps. It is 8 ft. long and can be used in indoor or outdoor applications. It is made of cast aluminum housing and polycarbonate lenses.

SLG Lighting’s FF G2 flood light comes in medium and large with a lumen output between 21,150 and 42,998. It has different mounting options (including square and round pole mount, wall mount and more), photocells and motion sensors for efficiency.

DeWalt’s DCL077B 12V/20V compact, cordless task light features a 360-degree handle and two tripod mounts. There are three brightness settings that produce 2,000 lumens of white light. It is rated for water and dust-ingress protection and weighs 2.8 lbs.

Makita’s 18V X2 LX upright LED area light has corded and cordless options. It is self-righting and provides 360 degrees of light or 180 degrees to the left and right. It features high, medium and low settings and dust- and water-resistant construction.

Lind Equipment’s 140W flood light generates light by two solid-state 70W LED integrated chips, which can endure shocks, vibrations and rough handling without breaking the LEDs. It is cool-running and safe to touch even when left operating for hours.

Generac’s MLTS LED light tower features a 2-cylinder engine that provides power for the fixtures, with optional export power for other job site needs. The polyenclosure is impact-resistant. The rear hood with gas-assisted pistons provides access for maintenance.

Hubbell’s 26W EEQ Series emergency fixture features a battery inside the housing that will start when normal power is disrupted. The housing is made of a corrosion-resistant, copper-free aluminum that is coated with a powder epoxy paint for extra corrosion resistance. The LED charging indicator light is visible through the lens.

Ridgid’s 18V GEN5X dual-power light cannon puts out 2,500 lumens. The head swivels 180 degrees to direct light. On its lowest setting it can run up to 30 hours on a single 5Ah battery charge. It can also be plugged into a 12V car adapter. It features an onboard cord retainer to hang the light upside down to illuminate hard-to-reach areas.

Hilti’s SL 2-A22 22V cordless work luminaire features a flexible head for illuminating confined and medium-sized work areas. There are three brightness levels, and the adjustable LED panel rotates 360 degrees and pivots vertically to provide directional light in a variety of applications. The retractable hook for hands-free lighting stows inside.

Makita’s 18V lithium-ion, cordless/corded work light includes an AC cord that has built-in cord storage. It illuminates a work area without the high heat produced by a halogen light. Users direct the flood light to the desired angle with the adjustable knobs. It is dust- and water-resistant. It can be mounted on a tripod stand or individually.

Hubbell’s EBB series explosion-proof, halogen emergency battery-backup system light is designed for egress or antipanic applications. It is made with a copper-free, cast-aluminum housing.

Isolite’s HL-series emergency luminaire features a fully automatic current limited pulse switching charger and temperature compensated components in the circuitry. The dual-diagnostic LED display indicates AC/ON and high charge.

Lind Equipment’s LE104 all-temperature work light features a bulb rating up to 100W and 120V. The cord stays flexible in cold temperatures and resists high temperatures. It also has an outlet with a 13A circuit breaker to bring more power. It features an on/off switch in the handle and a swing-open guard for a tool-free bulb replacement.
It comes with a 25- or 50-ft. cord.

Lind Equipment’s 40W Infinity floodlight features multiple mounting options. A built-in, clickable attachment changes the lighting mount from a tripod to a floor stand to a magnet attachment. It measures 14 in. long and 41/2 in. wide and weighs 2 1/4 lbs. The outer shell is made of high-impact plastic.

Megaman’s 2,000-lumen Tecoh CFx twist-lock LED light engine features an integrated driver for use in downlights for general lighting. It is rated for 35,000 hours and is available in two options: high-efficiency and extended-life dimmable ranges.

Southwire Tools’ headband light uses 21 LEDs that offer hands-free light with three power level settings plus a flash mode. It is adjustable and features a weatherproof switch. The light emits 42 lumens.

Topaz’s flood light is designed for landscape lighting and is bright enough to illuminate building façades. It features a die cast aluminum housing with integrated thermal management and an impact-resistant polycarbonate optical lens. It also features a bronze knuckle mount and is availible in 70 or 90W.

Ring’s floodlight camera is a hardwired security camera with ultra-bright LED lights and a siren. It features two-way audio with noise cancellation. The camera has object and person detection. Also, there are dual sensors with object and person detection with ultra wide angle motion sensors that enable viewers to detect motion around corners.

Milwaukee Tool’s Radius LED 130W temporary site light is AC powered. It is designed to reduce the labor time associated with temporary lighting installation, maintenance costs and overall energy consumption. It lights up a work space with 15,000 lumens.

Big Ass Fan’s handheld LED work light, the Big Ass Light Bar, has an extruded aluminum body, a shock-absorbing cap, a diffuser lens and an overmolded grip. It is chemical-resistant and waterproof. It has six brightness light levels and a runtime of up to 48 hours.

Orbit Industries’ LTL series LED temporary work light has a female outlet protected by a sliding coverplate. Multiple lights can be linked together using the included 10-ft. cord. It has a protective lamp cage and is available in three outputs: 60W, 100W and 150W.

iSolite’s Bug compact LED emergency light is suitable for damp location applications, offers housing in both black and white, and offers a swivel pendant mount upon request. It has a injection-molded, flame-retardant, high-impact thermoplastic housing and a quick, snap-fit installation for ceiling and wall mounts.

ESL Vision’s high output flood light is designed for sports venues and industrial applications. It has a weathertight construction and impact-resistant polycarbonate lens. It is available in 300-, 600- and 900W models, delivering up to 117,000 lm. It rotates up to 70 degrees on its vertical axis.

DeWalt’s 20V Max Tool Connect all-purpose work light emits 5,000 lm of natural white light. It can run for 11 hours. It can be hung or tripod-mounted. It has Bluetooth connectivity that provides tracking and controls with the free Tool Connect app.

AEMC Instruments’ 1110 light meter data logger is portable and designed for one-handed operation. It features optical sensors that are designed to match the response of the human eye. It has an ergonomically designed case, large display and intuitive function selection. It provides selectable lux or foot-candle units for display and features a blue, luminescent backlit display and min., max., average and hold functions.

Environmental Lights’ 6-in-1 ColorPlus LED strip light combines red, green, blue, amber and tunable white in each node. DMX can be used to adjust the levels of each of the six channels. It is UL-listed and RoHS-certified. It is designed for scenic, stage and retail environments.

Lind Equipment’s Beacon360 Trek Light LED flood light casts light 360 degrees and upward, illuminating up to 25 ft. in every direction. It is 8 in. long and 6.5 lbs. It can be purchased alone, mounted on a 4–6-ft. tripod, mounted on an aluminum floor stand, attached to a magnet, corded for daisy-chaining or with a high-strength adjustable clamp.

Ridgid’s Gen5X 18V dual-mode LED work light has a flexible neck that secures the light on a variety of surfaces. Its dual-mode setting switches between spot lighting and area lighting options. The lifetime LED produces 170 lumens. It has a 20-hour run time with a 4.0 Li-ion battery.

Topaz’s temporary, portable, high-bay LED luminaire is designed for damp locations and protected by a heavy-duty, corrosion-resistant safety cage. It weighs 6 lbs. and includes a 3-ft. power cord with a preinstalled, self-locking metal hook to allow hanging from structures. It has an operating life of up to 40,000 hours.

Southwire Tools’ LED string work light has LEDs on the top and bottom of the modules to provide light across the whole job site. It is available in 50- and 100-ft. lengths. It is IP-65 and outdoor-rated to protect against water and dust. Users can daisy-chain up to 10 strings of the 100-ft. model and 20 strings of the 50-ft. model.

Hioki’s FT3425 light meter is compatible with LED and OLED lighting. It automatically sends measured illuminance data to smart devices over Bluetooth connection, and the timer-hold function enables users to take measurements remotely. Its internal memory stores up to 99 values.

Dewalt's 20V Max cordless tripod work light has three brightness settings and a maximum output of 3,000 lumens. It has a telescoping design and collapses for portability and storage.

Orbit Industries’ LFL20 bullet flood light is designed for outdoor applications. It is available in 15W, 28W and 42W in both cool white and warm white color temperatures. Trunnion-mount or ¹/₂-in. adjustable knuckle-mount options are available. It has a UV-resistant, die-cast aluminum design and a lifespan of more than 50,000 hours.