Emerson’s G1 Versi-Tugger is designed for pulls normally done by hand and can pull up to 68% faster compared to manual pulling. The handle provides balanced weight distribution to decrease strain. The five-position pulling head quickly attaches to 1/2- to 4-in. conduit. When used to spool pulling line or mule tape, the tapered capstan enables the spooled line to slide...
Greenlee’s two-speed cable puller can shift from high-speed/low-load pulling to low-speed/high-load pulling with a simple double tap motion on the foot pedal control switch. It is designed for large and small cables up to 1,000 lbs. It features an on-board force gauge that provides visual communication of pulling force and speed changes.
Burndy’s Patriot cable-cutting tool is insulated and designed for a long reach. It is available in 82- and 94-in. lengths and provides users increased flashover protection and extended reach for live line cutting. It performs cuts in less than 15 seconds, which minimizes exertion and time.
Current Tools’ 6,000-lb. mobile cable puller features a four-wheel carriage for increased mobility and a built-in foot switch. It has a 8-ft. reach when fully extended and flat-free tires. The puller can be used on or off the carriage and has storage for all couplings.