Legrand’s Wattstopper LMSW-105-CCT color-control preset switch is a low-voltage CCT controller that sets and recalls preset lighting color temperature values and raises and lowers CCT levels. It automatically binds to any CCT load in a room while communicating with all other DLM devices to create a default sequence of operation as soon as it is plugged into a network.
Hubbell Control Solutions’ LightHawk dimming dual technology wall switch sensor combines passive infrared and ultrasonic technologies with 0–10V dimming. The user can set the occupied level to a predetermined level or set the sensor to activate to the last-used dimming level. This sensor covers up to 1,000 ft.2 and 180 degrees of detection.
Leviton’s Decora Voice switch is a voice-powered control system with Amazon Alexa built-in. It enables users to listen to the news, get weather reports, ask questions, dim lighting and control scenes with phrases like “movie time.” Users can program custom settings for preset lighting levels, fade rates and lamp types, and three-way compatibility provides dimming control of the same fixture...
Enerlites’ seven-day, digital, programmable, in-wall time switch can be programed with up to 18 on/off settings per week. It works with incandescent and halogen lighting. The large LCD screen shows time, day and load status. Manual override enables the load to be turned on and off. It has a built-in rechargeable battery, and the programming is protected during power outages.
Enerlites’ 24-hour, mechanical, in-wall timer light switch mounts in a standard electrical wall box and has built-in pins. Up to 24 on/off settings can be scheduled per day. The manual on/off switch overrides the timer.
Enerlites’ dual-tech passive-infrared and humidity wall sensor and switch detects motion and humidity levels in a room. The humidity sensor automatically starts ventilation fans when it detects excess humidity and turns them off when it is dry. It is designed for areas such as bathrooms and spas to help eliminate mold and mildew.
Legrand’s stainless steel, corrosion-resistant safety switch is designed for use in harsh environments. It is available with a standard or sloped roof and in 30A, 60A, 60A HP and 100A configurations. It has stamped-in on and off labels.
Burndy’s bolted wedge inline disconnect switch uses dual insulators to minimize switch movement during opening and closing of the blade. It can be snapped directly onto the line and secured with the Burndy conductor pivot retainer.