Burndy’s HPS-LWMAG hydraulic, long-reach pole cuts limbs and branches up to 13 in. in diameter. It features a 13-in. bar with an antikickback, narrow kerf, .325-in. pitch chain. It is available in lengths of 75 and 88 in.
Burndy’s Patriot PAT444S 11-ton crimping tool is designed for utility and commercial/industrial applications. It has a C-Head design that can rotate 355 degrees, an Infinity Drive transmission, a hydraulic pump system, protected electronic circuitry, large on/off triggers and a hand-grip area for use with or without gloves. The dieless, nest and indenter crimping profile eliminates the need for carrying multiple...
Ilsco’s TaskMaster hand-operated, battery-powered, pistol-grip hydraulic cutting tool has an LED work light, an LED battery charge indicator, a variable speed trigger and right- or left-hand ergonomic, nonslip cushioned grips. The latch-style tool head can rotate 360 degrees.
Hitachi Power Tools’ 7 1 / 4 -in. RipMax C7UR circular saw has a 15A motor, which reaches 6,800 rpm and can cut through OSB, LVL, plywood and other framing materials or fiber cement boards when equipped with a fiber cement blade. It has a dust blower to clear the cutting path. It has bevel capacity from 0 to 55...
Burndy’s Type YDS-RLNI Unisplice single-sleeve, full-tension splices can be installed with the 644 Series and PAT444S Series family of nest and indentor tools. Dies are no longer needed to achieve full-tension performance in overhead utility applications.
Sulzer's MixPac MixCoat system is designed for applying rapid cure materials with an air compressor. The use of cartridges allow very small areas to be coated, and partially used cartridges can be recapped and reused, minimizing waste. The prefilled cartridges also protect the applicator from direct contact with unmixed material.
Hitachi Power Tools' Worm Drive circular saw has 15A motor, a nonslip, ergonomic-grip rear handle; carbon brushes; and a three-position rafter hook. Its bevel capacity ranges from 0–53 degrees. The included blade wrench stores in the base of the tool for fast blade changes.
Hilti’s SDS-max TE 60-ATC/AVR combihammer features active vibration reduction, active torque control and a detachable power cord that snaps out of the tool if too much tension is applied. Using the Hilti Connect App, contractors can access a comprehensive tool history and summary, send requests for a repair from the job site and more.