Hilti’s PD-S laser meter is designed for distance and area measurements up to 60 m. It is pocket-sized and can resist hard job site environments. It measures distances and heights where traditional measuring methods fail. The measurement accuracy is 1½ mm. It provides single and continuous measurement.
Stanley Tools’ 100 ft. FatMax long tape rule features a 3-to-1 gear drive for faster rewind. A stainless steel blade ensures long life, and the end hook enables accurate inside and outside measurements. The cushion grip provides comfortable and slip-resistant hold.
Megger’s 200A battery-powered micro-ohmmeter is designed to measure the resistance of circuit-breaker contacts, bus-bar joints and other high-current links. It can can deliver a high current during the discharge and can store a large amount of energy compared to conventional capacitors.
Empire’s True Blue rafter square features Scribe-Guide, a scribe notch pattern for marking at 1/2- and 1/4-in. increments. It has permanent laser-etched markings for readability in any light condition. It is made from extruded aluminum. It is available in 7- and 12-in. models.
DeWalt’s 3/4-in. and 11/2-in. stud finders detect studs in wood, metal and AC wiring to depths of up to 3/4 and 11/2 in. respectively. They automatically calibrate and locate the center of the stud even at sub-optimal angles. They have a center marking channel for marking the stud location, directional LED arrows for visual guidance and beep notifications when a...
Cementex’s 6-ft. fiberglass measuring stick is 100 percent nonconductive to eliminate a common cause of electrical hazards—inadvertent contact with metal measuring tools. Because it is fiberglass and not wood, it will not warp if it gets wet.