Allied Tube & Conduit’s Allied IMC conduit is resistant to impact and can be cut, bent and joined for smooth, continuous raceways. The hot galvanized exterior increases corrosion resistance and protection against white rust.

Allied Tube & Conduit’s Super Kwik-Couple raintight conduit eliminates the need for field-threading. The design allows for installation in compact areas, and it is available in sizes ½- to 5-in. The blue coupling design allows inspectors to easily identify wet location approval and is listed for wet and dry locations.

Allied Tube and Conduit’s Kwik-Fit steel EMT has a built-in set-screw coupling, eliminating the need to install separate couplings. An integral set-screw coupling is formed on one end of each length of EMT. The exterior is coated with Flo-Coat for protection, and the E-Z Pull interior coating provides a smooth surface for faster wire pulling.

RACO's TH series conduit hangers are designed for use in wet or dry locations to support runs of rigid/IMC and EMT conduit from ceilings and walls. It has a retained bolt and threaded hole and can be mounted vertically or horizontally. It is made of durable steel with a pregalvanized finish for corrosion protection. It is available for 3/8–2-in. rigid/IMC...

Thomas & Betts’ liquidtight flexible metal conduit has a hot-dipped zinc galvanized steel core and smooth PVC extruded jackets. It’s available in gray or black and in sizes from 3/8–4 in. Conduits up to 11/4 in. are integral copper bonding wire with a square lock design. Conduits from 11/2–4 in. have a fully interlocked design. 


Allied Tube & Conduit Corp.’s Super Kwik-Couple conduit is designed to eliminate field threading. It connects GRC to threaded or unthreaded IMC, EMT or other GRC. Separate couplings are needed.