Burndy’s Wiley ACC-F4F wire management clip is made of corrosion-resistant 304 stainless steel. It slides 90 degrees on to module frames of various thicknesses. It accommodates one to four PV cables up to 8 mm in diameter. The rolled edges are designed to help protect cable insulation from damage.
Burndy’s ACC-F490 Wiley wire management clip is made of corrosion-resistant 304 stainless steel and accommodates one to four PV cables up to 8.0 mm in diameter. It slides 90 degrees onto module frames of various thicknesses. The rolled edges are designed to help protect cable insulation.
Burndy’s Y101300C cable-tie and wire cutting tool and Y101400SC is designed for use on soft metal wires; copper and aluminum ranging from 22–10 AWG. Its custom-designed jaw prevents accidental damage to bundles of wire or cables. It has heat-treated steel alloy blades and cushioned handles.
Burndy’s HPS-LWMAG hydraulic, long-reach pole cuts limbs and branches up to 13 in. in diameter. It features a 13-in. bar with an antikickback, narrow kerf, .325-in. pitch chain. It is available in lengths of 75 and 88 in.
Burndy’s Type YDS-RLNI Unisplice single-sleeve, full-tension splices can be installed with the 644 Series and PAT444S Series family of nest and indentor tools. Dies are no longer needed to achieve full-tension performance in overhead utility applications.
Burndy’s Patriot PAT444S 11-ton crimping tool is designed for utility and commercial/industrial applications. It has a C-Head design that can rotate 355 degrees, an Infinity Drive transmission, a hydraulic pump system, protected electronic circuitry, large on/off triggers and a hand-grip area for use with or without gloves. The dieless, nest and indenter crimping profile eliminates the need for carrying multiple...
Burndy’s festoon grounding system elevates and manages the conductor to protect from problems such as pinch points and theft. The kit includes C-rail, coupler hangers, tow and intermediate trolleys, end stop, end caps and mounting clamps. It is available in a variety of lengths.
Burndy’s KAP/KAPO mechanical pin adapters provide an alternative for terminating conductors into mechanical connectors typically found in switchgear, breakers and other electrical equipment. Various sizes are available and accommodate 6 AWG to 750 kcmil wire. A center pin and off-centered pin design are available in each size. Insulated covers are provided with each connector.
Burndy’s small terminal kit features small vinyl-insulated rings, forks, splices, disconnects and pin terminals packaged with a plier-type crimping tool or a full-cycle ratchet tool. The kit is housed in a durable dual-latch metal case.