iTOOLco’s Cannon 6K wire puller pulls out 9 ft. of extra wire. It can pull 8 and 28 ft./min. on low speed and 20 and 70 ft./min. on high speed. It is lightweight and easy to transport. Users can quickly change from side pull to overhead, underground or truck hitch. It can maneuver into tight spaces, and does not require anchoring.

iTOOLco’s 120V Cannon 3K wire puller features dual capstans that can pull 16 and 40 ft. per minute on low speed and 51 and 85 ft. per minute on high speed. It includes a foot switch and a universal adapter for loads under 5,000 lbs. It can change from side-pull to overhead, underground or truck hitch.

iTOOLco’s Cannon 10K wire puller can be changed quickly from side pulls to overhead or underground. The universal adapter sits on the conduit lock nut, fits a wide range of sizes and often eliminates the need to use the conduit adapters on lighter pull. There is an adjustable counter-balance for setup and a 15-lb. working weight.

iTOOLco’s Pull Slick Rope is a synthetic fiber wire-pulling rope with a high tensile strength of 39,000 lbs. It is made of 12-strand, single-braid synthetic fiber with ultra-low stretch. There are no organics in the rope, so it will not rot and does not absorb water. It is abrasion-resistant and has dual factory-installed pulling eyes on either end.

Toolco’s Cannon 6K wire puller is two wire pullers in one with dual capstans that can pull 8 and 28 ft. per minute on low speed and 20 and 70 ft. per minute on high speed. It can change from side pull to overhead, underground or truck hitch. It pulls out 9 ft. of extra wire; it maneuvers into tight spaces and no is anchoring required.