MetalTech’s 4-in-1 ScaffoldBench can be converted into a 6-ft. Baker scaffold, garage storage unit, utility cart and mobile workbench. It can reach up to 12 ft. high and hold up to 1,100 lbs. It has a steel-reinforced plywood platform and adjustable spring-loaded locking pins to change the height every two inches from 27 in. up to 73 in.
Milwaukee Tool’s conduit bender has high-contrast markings, a reinforced hook and pedal and a secure double-bolted handle. It also has bending references and a wear-resistant reference chart. It is available in 1 / 2 - and 3 / 4 -in. aluminum models and 1 / 2 -, 3 / 4 - and 1-in. iron models.
Milwaukee Tool’s Shockwave Matrix carbide driver bits are optimized with Shockzone geometry in varying lengths and thicknesses to absorb peak torque and prevent breaking. Driver bits include a variety of bit lengths and kit configurations in Phillips, square and Torx tips.
Mockett’s PCS75 power grommets are can be mounted horizontally or vertically in a variety of furniture. To install, drill a round 1 3 / 4 -in. hole, fasten with a locking ring from underneath, then plug and play. They are available with a single power outlet or a dual USB charger.
Overhead Door’s Legacy 920 garage enables homeowners to monitor and control their garage door opener from anywhere using a smartphone or mobile device. Homeowners can check if the garage door is open, closed or if there are any changes to the door position, know when someone is attempting to operate the garage door and remotely open the door for others...
Platinum Tools’ EZ-RJ12/11 die is used to terminate EZ-RJ12/11 connectors. It is interchangeable and reversible when used with EXO crimp frame. It includes a single-cycle crimp and flush trim, and connectors lock into the tool for correct positioning during crimp. It can also crimp other standard “non-EZ” or pass-through style connectors.
Platinum Tools’ MapMaster mini product kit includes a mini RJ-45 cable tester, which maps multiple locations and detects shorts, opens, miswires, reversals and split-pairs. It includes a built-in tone generator and auto-off to extend battery life. It also includes a port saver, 5-in. network patch cables, a waterproof splice coupler and a rollup pouch.
Rack-A-Tiers’ Laserline kit includes a CO 2 -powered gun that shoots a foam dart attached to 200-ft. line. It is designed for applications like pulling wire across a T-bar ceiling or through a crawl space. Users fire the Laserline, attach a wire, walk around and pull the wire from there.
Ridgid’s press-in 3 / 4 -in. branch connector tool kit makes 3 / 4 -in. branch connections on 1 1 / 2 -in, to 6-in. black steel pipe. It includes an expander, fitting positioning guides, an arbor shaft assembly, drill guide and vacuum adapters. The hole saw arbor is designed to prevent the saw from penetrating both sides of the...
Roper Whitney’s 13-piece hole punch kit is designed for use with mild steel (up to 16 gauge) and aluminum. It includes a round punch and dies for six sizes: 3 / 32 , 1 / 8 , 5 / 32 , 7 / 32 , 1 / 4 and 9 / 32 in.