ABB’s ST200M supplementary miniature circuit breakers are intended for use within industrial control panels, appliances and other equipment to protect against overcurrent where branch-circuit protection already has been provided or is not required. They have thermoplastic housing and a red/green contact position indicator.
ABB’s Thomas & Betts Sta-Kon terminal assortment kit contains 12 different high-conductivity copper terminals with corrosion resistant plating, a WT112M hand tool, TY525M cable ties and a WM 0-9 wire marker book. Connectors include marked stud and wire sizes.
Acclaim Lighting’s Ai Flex Interior LED circuit strip is a dim-to-warm system with a 1,800–3,000K color temperature range. It is available in 16.4-ft. spools and can be cut in 6.5-in. increments. The interior LED circuit strip uses 3.1W per ft. and has a 124° beam angle.
AEMC Instruments’ 6681 cable locator detects buried telecommunications cables, electric power and other cables, and metal pipes during installations of CAT III or lower, at voltages of 300V or less. It can locate open circuits, shorts, track cables and locate fuses or circuit breakers. The system includes a transmitter, a receiver and accessories. The transmitter and receiver both have a...
Burndy’s ACC-F490 Wiley wire management clip is made of corrosion-resistant 304 stainless steel and accommodates one to four PV cables up to 8.0 mm in diameter. It slides 90 degrees onto module frames of various thicknesses. The rolled edges are designed to help protect cable insulation.
Commercial Electrics’ portable MS102H GFCI outlet tester detects common wiring problems in standard receptacles. Two yellow and one red LED indicate the following: correct wiring, open ground, reverse polarity, open hot, open neutral and hot/ground reversed.
Confast’s Thunderstud hot-dip galvanized wedge anchor is made from 304 stainless-steel clip in a variety of diameters, lengths and thread lengths for applications into solid concrete. With hot-dip galvanizing process, it is designed for use in moist environmental applications.
DeWalt’s 20 Max rotary laser level measures up to 2,000 ft. with an accuracy of 1 / 16 in. at 100 ft. It has an IP-67 rating for debris and water resistance and 2-meter drop protection. It also has up and down plumb dots, a dual-axis slope mode and a scan mode, which takes measurements at 15, 45 and 90...
DeWalt’s 20V Max Tool Connect all-purpose work light emits 5,000 lm of natural white light. It can run for 11 hours. It can be hung or tripod-mounted. It has Bluetooth connectivity that provides tracking and controls with the free Tool Connect app.