Bigger Knockouts with Hole Saws

Jun 15, 2000

Article Tags

You're reading an older article from ELECTRICAL CONTRACTOR. Some content, such as code-related information, may be outdated. Visit our homepage to view the most up-to-date articles.

When you have a 1/2-inch knockout and you need a 3/4-inch one, put a 1/2-inch hole saw on the arbor, then slide a 3/4-inch hole saw over the 1/2 -inch one. The 1/2-inch hole saw acts as a pilot to the 3/4-inch hole saw.

featured Video

;

Turn Jobsite Minutes into Savings: Hassle-Free LED Driver Replacement with FieldSET® by eldoLED®

Because your time matters, there’s a faster way to replace LED drivers in the field with FieldSET programmable LED drivers. Hassle-free configuration using ONE handheld programming tool, no internet needed!