In October, 20 exhibitors at the 2012 NECA Show in Las Vegas received Showstopper awards. Winners were selected from 122 entries, all prominently displayed at the front of the exhibit floor. After the winners were selected, they were identified by blue ribbons in the Showstopper Showcase Room and a trophy at each winner’s booth. A panel composed of electrical contractors and ELECTRICAL CONTRACTOR contributors judged the products.
To be eligible for the award, products must have been introduced to the electrical market since Jan. 1, 2011; be currently available; and not be a previous Showstopper winner.
The 2012 Showstoppers are listed alphabetically. Here are your winners!
1 ACCUBID TRIMBLE In circumstances where access is limited to PDF or TIFF images rather than native CAD drawings, Trimble offers Accubid LiveCount Pro, which provides the efficiency of paperless, on-screen takeoffs; a revolutionary autocount refinement feature; and seamless integration with Accubid Enterprise Estimating, Classic Estimating and Classic ChangeOrder software. Powerful and accurate symbol-recognition capability displays search results for easy identification of objects found
in the drawings.
2 ALL-TEST PRO This user-friendly tester for electric motors eliminates guessing whether motor issues are electrical or mechanical. Tests can be initiated from the starter/drive or directly at the motor. The device automatically tests the condition of stator, rotor, connections and contamination. It is ideal for testing incoming and stored motors, troubleshooting installed motors, tests following motor repairs and providing early warnings of changes in motor health.
3 CBM LIGHTING CBM offers high- and low-bay LED fixtures to replace a building’s high-intensity discharge (HID) lighting, thereby providing longer life and energy savings. For example, CBM’s 300-watt (W) light-emitting diode (LED) high-bay replaces one-for-one a 1,000W HID for commercial and industrial applications. Energy savings are rated at greater than 70 percent. Only 10 percent lumen depreciation occurs over 80,000 hours. The warranty for the LED chip is seven years and five years for the driver.
4 CONEST The JobTrac software contract change order management and communication control system provides complete job management capabilities for on-time, on-budget project completion. ConEst’s JobTrac keeps management in full control of projects by tracking budgeted and completed labor, material, equipment and subcontracts, including all modifications to the original contract, such as change orders, alternates, submittals and all correspondence, daily logs and documentation related to each project.
5 COOPER WIRING The Arrow Hart commercial-grade USB charger/duplex receptacle replaces standard duplex receptacles with one providing dual USB charging ports. The USB ports are compatible with most electronic devices without needing a special adaptor or a computer. An LED indicator confirms that a device is connected. Prestripped wire leads facilitate installation. Tamper-resistant shutters comply with 2011 National Electrical Code
Article 406.12. It is UL listed.
6 DEWALT This 20-volt (V) MAX lithium-ion powered ¼-inch, three-speed brushless impact driver is rated with 57 percent more run time compared to the company’s 20V MAX brushed motor tool. It is compact and weighs 3 pounds with a pushbutton chuck for one-handed operation. Three bright LED lights illuminate the work area and have a 20-second delay after trigger release. An easy-to-read “fuel” gauge shows the user the level of charge in the battery.
7 ERICSON The E-Cart 2 explosion-proof mobile power distribution center provides a turnkey temporary power source for a wide range of hazardous location applications. Rugged construction stands up to harsh job-site environments, and its design complies with the latest safety standards and certification requirements (NEMA 3R rated and Class 1, Dev. 2 Groups C and D certified). The platform is constructed from heavy-duty aluminum and provides flexible configuration to meet specific job requirements.
8 EYE LIGHTING INTERNATIONAL Kiaro LED architectural street and area luminaires feature an exclusive optical design engineered to deliver superior performance in controlling backlight, uplight and glare, while reducing energy consumption. The optical design delivers more light at a lower wattage and increased street-side lumens result in better visibility and reduce the number of required poles. Minimized critical components increase overall reliability.
9 FLIR/EXTECH Extech’s MG300 two-in-one insulation meter is a true rms multimeter with a built-in insulation resistance tester and the added safety of wireless data streaming for remote monitoring and recording. With the device’s insulation-testing capabilities of a digital multimeter, electricians always are ready for the process, making it a part of routine predictive maintenance with faster troubleshooting and repairs without needing to carry additional tools.
10 FLUKE CORP The Ti 125 industrial-commercial thermal imager is described as the lightest, most rugged and easiest-to-use professional imager available, enabling technicians to make fast, efficient inspections and thoroughly document problem areas. For optimum image clarity and scanning convenience, the IR-OptiFlex focus system produces images in good focus from 4 feet and beyond. IR-Fusion technology blends digital and infrared images into a single image.
11 GPS INSIGHT Advanced GPS tracking, navigation and messaging software provides complete insight into all aspects of fleet operations. GPS tracking provides real-time location, unlimited history, engine diagnostics, comprehensive reports, alerts, routing and messaging tailored to individual customer requirements. A choice of tracking devices offers options for the level of information documented. No service contract is required, and monthly rental options are available.
12 GREENLEE The patented, battery-powered portable hydraulic pump for crimping, cutting and pumping applications up to 10,000 pounds per square inch is powerful but lightweight. Its IntelliCrimp digital sensor provides real-time monitoring for crimping. For cutting and punching, the sensor provides automatic traction stop, retraction stop repeat and automatic stop. Powered by an 18V lithium-ion battery, the package weighs only 14 pounds.
13 LEGRAND/PASS & SEYMOUR The P&S audible alarm ground-fault circuit interrupter (GFCI) receptacle introduces GFCI protection that can be both seen and heard. The device provides an audible warning of a tripped condition and that power to a receptacle is interrupted to basement sump pump systems, commercial freezers, refrigerated display cases, and other areas where a GFCI indicator light might not be visible and is an intelligent way to help minimize the likelihood of basement flooding, food spoilage and other damage caused by a power disruption.
14 LEVITON The Zipline fluorescent retrofit system provides a way to transform existing high-cost, high-maintenance fixtures into energy-efficient and cost-effective lighting with less labor time than conventional retrofits. Ballast and sockets are combined in one component, an innovation integrating the entire lighting system into two simple-to-install components, cutting retrofit installation time by as much as half, meaning less downtime for facility managers and more productivity for contractors.
15 MILWAUKEE The M12 subcompact cordless band saw is promoted as the most compact, lightest weight cordless band saw on the market. At less than half the weight and size of a traditional deep-cut band saw, the M12 band saw provides portability and one-handed operation with 15/8-inch cut capacity for clean cuts on the most common small-diameter metal-cutting applications. It is designed to deliver more than 150 cuts per charge with the included M12 REDLITHIUM XC battery.
16 MCCORMICK SYSTEMS Version 11 software has been upgraded to the latest version of Microsoft Access and enhanced with new ribbon interface to help users quickly find command functions. Functions are organized into logical groups collected under tabs related to specific activities, such as takeoff or bid summary. Photo and document areas also are enhanced. Tutorials A and B are compiled into a set of demonstration videos to simplify and speed up training of new users.
17 SCHNEIDER ELECTRIC Measurement and verification panelboards measure energy use on lighting and plug loads from the breaker all the way to the individual circuit level, allowing energy use to be managed more efficiently. The ability to independently control and monitor individual branch-circuit loads opens a wide range of options to better understand the dynamics of a building-system performance and to make informed decisions about sustainability solutions.
18 SOUTHWIRE/MAXIS The Maxis EMT bending station is a complete system for storing, bending and cutting ½- and ¾-inch EMT conduit, speeding up the bending and cutting by as much as 30 percent. Mounted on casters, the cart has storage for 1,000 feet of conduit and has an extra shelf for storing tools and materials. The work table height is 30 inches and has a built-in 60-inch ruler and protractor. A speed vice is specifically designed to hold conduit and Unistrut.
19 VISION INFOSOFT ElectricalBid Manager with the BestPrice tool provides users with a simple material price and quote comparison tool to streamline material pricing management. BestPrice helps estimators determine which local supplier is offering the best quote, and the Target feature can be used to negotiate pricing by applying Vision Infosoft’s EPIC (electronic pricing information and catalog) for instant, realistic pricing information for more than 1.9 million items.
20 XTRALIGHT The XtraLight LED high-bay luminaire is a low-profile, energy-efficient, 192W LED fixture that uses advanced thermal management technology for rapid heat dissipation in addition to secondary optics for precise lighting control. This fixture is engineered to replace up to a 400W HID. It is well-suited for industrial environments and stack-aisle warehouses. Anticipated LED module life is 100,000 hours—60,000 hours at 70 percent of initial lumens.