Manufacturer Products

Johnson Controls’ Autopulse Z-20 releasing control system with suppression release peripherals provides actuator supervision and control for use in automatic extinguishing and deluge or preaction releasing systems. Hazard-area initiating and notification devices are controlled using either conventional or addressable circuits. 

Seco-Larm’s indoor 500DPI optical fingerprint reader and keypad supports up to 500 fingerprints and 500 user codes. It identifies a fingerprint in less than a second. It has a false acceptance rate of 0.0001% and a false rejection rate of 0.01%.
With Eaton’s All-Pro MS180BT Bluetooth-enabled motion sensor, users can control outdoor security lighting from up to 60 ft. away with an app. It is compatible with any LED or incandescent security lighting product that uses a standard ½-in. threading connection. It has a 180-degree detection area and is available in white or bronze. 

Kichler’s 16083BK smart landscape lighting controller paired with 
Vera Gateway and app enable users to set zones and schedules for their outdoor lighting. Zones can be programmed to turn on and off at specific times, with events such as sunrise/sunset, when a motion sensor is triggered, on holidays and more.
System Sensor’s SpectrAlert Advance SCR red, indoor, ceiling-mount strobe has selectable settings of 15, 15/70, 30, 75, 95, 110 and 115 cd. It is operational at –40–151°F and 10–93 percent (non-condensing) humidity. 

Centralite’s 3315-C water sensor is intended to protect homes against leaks and floods. It should be installed directly on the ground near water heaters, drain pans and underneath sinks. It can detect as little as 0.5 ounces of water and trigger a whole-home water shutoff valve to disconnect the water supply. It is water-resistant to ensure notification before damage occurs to the sensor. 

Universal Lighting Technologies’ Diversa WOR ceiling-mount occupancy PIR sensor has onboard switches and dials for configuration changes, a tilting lens and a link to a network of up to eight sensors for master/slave control in one area. Additional options include a photo sensor for daylight harvesting, 0–10V dimming and auxiliary relay.
Buster + Punch’s LED Buster lamp has a center resin light pipe, which allows for a focused spotlight and a warm ambient glow. It is available in dimmable and nondimmable options and comes in a warm gold, smoked grey or bright crystal finish with a satin metallic sheen. 

Sengled’s Pulse lamp combines a dimmable LED lamp with a multichannel JBL Bluetooth speaker in a single unit without wires or cords. As many as eight lamps (up to 100 ft. apart) can be linked together and controlled with the Pulse mobile app on iOS or Android devices. It has a standard E26 base.
Eye Lighting’s Brutus metal halide lamp is available in pulse- or probe-start models. It has extra reinforcing braces and neck supports to withstand shocks and vibrations and to prevent electrical failures, arc tube dislocations, weld failures and breakage.

Pages

X